Fedora Networking :: Bridged Networking And NetworkManager - No Network Connection Because Network Isn't Managed

Mar 2, 2011

I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)

But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)

The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.

Is there a way to have both of these pieces of functionality?

I am using FC14

View 5 Replies


ADVERTISEMENT

Fedora Networking :: Eth0 Connection Failed - Device Not Managed By NetworkManager

Aug 10, 2010

Yesterday I did an upgrade and today my box is unable to connect to the internet.

I have tried another cable, it didn't help.

Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:

Code:

I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.

View 3 Replies View Related

Debian :: NetworkManager Applet Shows No Network While Connected - Wired Network Device Not Managed

Oct 30, 2010

I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says

"Wired Network Device not managed"

While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.

View 14 Replies View Related

OpenSUSE Network :: Setup Bridged Networking On 11.4 With Xen

Aug 20, 2011

Newbie Question: How do I setup networking on openSuSE 11.4 on an HP Proliant DL385 G7 with 4 NICs to host Windows 2008 R2 on Xen? I've installed openSuSE 11.4 with all the patches (and most of the server patterns - Mail and News, LAMP, LDAP, Samba, etc.), and I've installed Windows 2008 R2 in a Xen virtual machine. I'm having problems configuring the 4 NICs eth0, eth1, eth2, eth3 are "bound" without an ip_address as br0

eth0 connects to my ISP - currently through a private LAN - It connects directly to the router with static IP 192.168.0.105 Eventually, one of the other NICs will serve ip_addresses via DHCP to a separate LAN (for use in an office setting), and eth0 will be set with a static IP from the ISP That means, eth0 will be static to the ISP, and the other NICs will attach to a switch serving private ip_addresses in the 192.168.0.xxx range.

Currently, I have br0 unconfigured and eth0 static. I have configured eth0 in the External Zone and br0 in the Internal Zone in the firewall, and all the correct ports are opened (afaik) I have enabled masquerading. Hostname, Domain (workgroup), DNS Server addresses and IPv4 Gateway are configured.

Windows 2008 R2 (Guest VM in Xen) "sees" the other machines on the network, and "browses" the internet, although it will not download patches except intermittently. I have not tried connecting to it from the LAN Eventually, I wish to run Windows Terminal Server. openSuSE cannot "browse" the internet, though it initially did. What am I missing? I "think" I need routing or NAT, or I may have my bridge setup incorrectly, although I've tried almost every combination. Google says Xen should be setup with either NAT or a Bridged Network.

Output of ifconfig:
br0 Link encap:Ethernet HWaddr 3C:4A:92:76:B8:F2
inet6 addr: fe80::3e4a:92ff:fe76:b8f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:953 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:119849 (117.0 Kb) TX bytes:368 (368.0 b)
[Code].....

View 2 Replies View Related

Fedora Networking :: NetworkManager Shows No Wireless Network?

Nov 27, 2009

I'm having trouble getting this wireless card to work. I installed the broadcom-wl driver on Fedora 12.

Code:
[xxx@localhost ~]$ uname -r
2.6.31.6-145.fc12.x86_64
[xxx@localhost ~]$ lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl

The card is recognized by System--admin--network as the correct card (BCM43XG) and assigned eth1. However, NetworkManager shows no wireless network. I have a great signal on the same machine if I boot into a Windows partition.

View 4 Replies View Related

Fedora Networking :: NetworkManager Won't Configure Network Until Login

Jan 9, 2011

I'm on F14 and can't seem to get NetworkManager to behave. I seem to remember being able to start my machine and see my static address configured right after boot. For some reason, that's no longer the case. When I finish a boot, I'm not getting any address until I log in. I've tried editing the ifcfg-eth0 both by hand and by the system-config-network. I've played with the "Available to all users" checkbox on both the nm config applet as well as the system-config-network gui. I can't seem to get it to behave predictably and give me my static without having to be in a gnome session.

Here's my ifcfg-eth0 from /etc/sysconfig/network-scripts

View 6 Replies View Related

Fedora Networking :: Networkmanager Can See My Local Wireless Network - Asks For The Wep Key

Sep 26, 2009

I've spent AGES getting ndiswrapper to work on FC11 with my USR 5416 card.

Now it's finally working and Networkmanager can see my local wireless network. Problem is when I try to connect and it asks for the wep key, the encryption I'm using is not an option.

My network uses a 64 bit ASCII passphrase. My options when connecting are:

None of these seem to be right for my network and, consequently, none of them work.

View 11 Replies View Related

OpenSUSE Network :: Static IP For Bridged Connection ?

Aug 11, 2011

I have virtual box installed which automatically installed bridges for my network adapters. This has always worked fine. I'm attempting to set up a static IP for this machine now. I use NetworkManager, and the physical connection (eth0) is set to static IP of 0.0.0.0, and the bridge (br0) attached to eth0 was set to DHCP. I changed br0 to my desired static IP and lost net connectivity (I'm talking about the host, not the virtual machine - I'll get the host working first). Re-enabling DHCP restores connectivity. So I don't know what the problem is, but I am unable to assign a static IP to the bridged connection. Do I have to do this differently? Do I need to remove the bridge so I am using just eth0 again, assign the static IP to eth0, and then re-install the bridge? I haven't tried that yet because a) I don't know how to remove & reinstall the bridge, because it was done automatically by Virtual Box installation, and b) I could probably do that if I had the time figure it out but right now I don't.

I set up a static IP on wlan0 on another machine using Network Manager and it works fine. That machine also has Virtual Box installed but for some reason doesn't have the bridged connections. (Perhaps because it runs Ubuntu, not OpenSUSE, if that makes any difference)

View 1 Replies View Related

Ubuntu Networking :: 10.04 Asus USB-N13 Not Managed By Network Manager

Oct 3, 2010

Just purchased a Asus USB-N13, and having follwed a mixture of tutorials, including the readme on the driver disk, i have had no luck in getting this adapter to work.Upon using "sudo iwlist ra0 scan" the adapter can see multiple networks, however device manager is stating that the device is not managed. How can I get this sorted and connect to a network?

View 1 Replies View Related

Ubuntu Networking :: Network Manager Pppoeconf Device Not Managed?

Apr 30, 2010

After the use of pppoeconf, the network manager does not recognise neither the wired nor the wireless connection anymore. (It nicely did it before that) I tried to replace the etc/network manager folder with that of a different machine. Still the same. What else can I do to reset Network Manager ?

View 1 Replies View Related

Ubuntu Networking :: 9.04 - Internet - Wired Network - Device Not Managed

Sep 21, 2010

I'm having trouble getting onto the internet with ubuntu 9.04. I have just moved house and have just got the internet set up here (typing this on windows laptop with wireless). My ubuntu desktop is plugged in to the network, but in the top right hand corner when I click on the network icon I get: "Wired network device not managed"

In my old house I had a static IP. Is this anything to do with it?

View 9 Replies View Related

General :: VirtualBox - Network Connection To Bridged Mode Setup Fails

Jan 23, 2011

I virtualised backtrack on windows 7, and set up the network connection to bridged mode, but my networking still fails.
dhclient eth0, outputs many DHCPDISCOVER but no DHCP offers.

View 2 Replies View Related

Fedora Networking :: Eth0 No Longer Managed In NM - Device Not Managed ?

Nov 3, 2010

I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.

View 2 Replies View Related

Ubuntu Networking :: SSH Over One Network Connection And Out To Internet On Another Network Connection

Jul 9, 2010

I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?

View 1 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

Networking :: Slow/Lose Network History Receiving - Network Connection

Oct 12, 2009

I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib

But I clean my PC every few days "BleachBit"

I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast

I am not quite sure what Information you might need from me to give.

I use Ubuntu 8.04 LTS

View 1 Replies View Related

Networking :: Re-enable Network Access By Restarting NetworkManager?

Jun 12, 2009

Ubuntu desktop 9.04 Whenever I try to copy files to any machine on the network, the transfer stops and I no longer have access to the network or the internet. This happens whether I'm doing scp, copy with the gui, when copying to windows machines, and when uploading database files with phpmyadmin. I have been able to successfully transfer large amounts of data outside of the network via ftp, but not to any on the network. I've discovered that I can re-enable network access by restarting NetworkManager.

View 1 Replies View Related

Fedora Networking :: F13 No Network Connection

Oct 21, 2010

I'm also new with linux i tried ubuntu and mandriva, and they worked fine out of the box.But I wanted to try Fedora because it looks great to my opinion.After installing it, everything worked fine, so I updated the system, and after the update my internet doesn't connect anymore, but it does see my wlan ssid. but it just keeps on asking my wpa key.... everytime.

View 4 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Networking :: STP In Bridged Connection ?

Nov 24, 2010

I am trying to get a bridged connection to work in centos

Here is the network diagram [url]

There are two interfaces in linux system , they are bridged and connected to the windows system I am not sure if I need to enable STP in the bridge or not?

View 1 Replies View Related

Ubuntu Networking :: Networkmanager - Set The Number Of Attempts At Connecting To A Network

May 6, 2010

set the number of retries networkmanager attempts to connect to a network to infinity?

I live in an area of Australia were wired internet dare not tread (or so say the ISPs). My only real choice is 3G wireless broadband, and even that is iffy at times. Often late at night the network towers do "something" (reset, maintenance, etc. - no idea) and the internet drops out, networkmanager tries to reconnect, fails, tries again, (etc. etc.) until it ultimately gives up, requiring human intervention when the towers are done with whatever it is they are doing. This happens frequently, and I'd like to have networkmanager keep trying "forever" until it connects so I don't have to restart the connection each morning.

Where would such a thing be set? How does networkmanager know when to give up?

View 5 Replies View Related

Ubuntu Networking :: Broadcom Corporation NetXtreme BCM5721 Network Card Randomly The Network Connection On The Server Will Stop Working?

Jan 29, 2011

I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.

I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?

View 4 Replies View Related

Fedora Networking :: How To Choose Different Network Connection

Apr 29, 2009

I have somehow made 2 internet connections on my fedora 10. one is system default, which doesn't work. so I usually login and select from the top panel to the other working one. how to choose it from a terminal? then I can do it from a remote terminal.

View 1 Replies View Related

Fedora Networking :: No Network Connection On Startup?

May 11, 2009

Suddenly, for no reason apparent to me, on initial logon I don' t have an eth0 connection. I click on the Network Manager icon in the tray, and connect that way. But it would be nice if it connected automagically. How do I fix network to connect on 1st logon?

View 3 Replies View Related

Fedora Networking :: Set Up Manual Network Connection?

Dec 3, 2009

i have no problem with DHCP Internet conection, when i set up to manual and manually imput an IP ADDRESS-NETMASK-GATEWAY y get local red but not Internet. Im i missing something, i cant find a guide for dummies.

View 3 Replies View Related

OpenSUSE Network :: NetworkManager Information Tab For VPN Connection

Mar 15, 2010

I have a successfully connected VPN connection. When hovering on the networkmanager applet it show beside the wireless connection also the connected VPN. The icon also changed from staircase-bar to staircase-bar with forelock. Oh yeah I'm using GNOME desktop.However when right-clicking on it and choose Connection Information I can only found tab for the wireless connection. How can I have the information tab also for the VPN connection, showing like IP address and gateway used?

View 1 Replies View Related

OpenSUSE Network :: Disable Connection In Networkmanager?

May 2, 2010

I just tested Networkmanager on OpenSuSE 11.2. I tried with my wired connection and it works.

I thought I test to connect with network sharing with my Android phone. The Android phone connects according to Networkmanager, but I'm not sure if it actually works as the wired connection is still active.

I tried to figure out how to disable the wired connection, but eventually gave up and just pulled the wired network plug.

But surely, there must be a way to disable connections from Networkmanager?

View 2 Replies View Related

Fedora Networking :: Network Connection Not Automatically Activated

Mar 11, 2009

After an update this week I noticed some strange things with the network.
1. The network connection doesn't activate itself automaticaly. Have to do it every time when booted up.
2. At the taskbar icon the previously "Auto eth0" changed to "System eth0". I guess this is kind of connected to the first issue
3. I can't connect anymore to the windows network -Times out (also worked fine before)
How to set it up to the "old" way?

View 1 Replies View Related

Fedora Networking :: Run Script Upon Network Connection Similar To If-up.d

Jan 16, 2010

I recently switched from ubuntu to fedora and had a script to mount and umount sshfs when the network changed states. I placed the scripts in /etc/network/if-up.d/ and /etc/network/if-down.d/ and they were run any time the network went up or down. The closest thing I've been able to find is editing the ifup and ifdown scripts in /etc/sysconfig/network-scripting/, but that looks like it would be broken after an update. I'd also rather not use a script with ping because that wouldn't work well when the network goes up and down several times.I've been looking for a while and haven't been able to find a method similar to debian on fedora. Is there something I overlooked?

View 3 Replies View Related

Fedora Networking :: Connection Sharing With Network Manager

Dec 21, 2010

I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved