Fedora Networking :: Netgear WG511 Works With WEP But Not WPA?
Sep 6, 2009
I used the following guides to try and get my Netgear WG511 PCMCIA card going:
[URL]
I also made a post about it here: [URL]. As the problem doesn't appear to be ndiswrapper itself I've made this separate post.
Unfortunately, I still end up having wlan0 attempting to connect, prompting for my password, trying to connect then prompting for my password (ad infinitum).
I changed my network security from WPA to WEP and now my card works fine. why this might be happening (i.e. why WEP works but WPA doesn't?)
View 2 Replies
ADVERTISEMENT
Jan 21, 2011
Edit: after upgrading everything using a usb to ethernet port converter ndiswrapper is working perfectly
I do not have internet access on a laptop I am trying to upgrade. It has no ethernet port. I may resort to buying a USB to ethernet adapter but I spent more than I would like to have already. I have tried every command in the HOWTO for wireless difficulties and posted the output.
[Code]...
View 4 Replies
View Related
Feb 22, 2011
I have just installed Ubuntu 10.10 on a Dell Laptop. It has a Netgear WG511 (made in China) PCI wireless card but I cannot see any connections other than the wired one. Entering in lspci in the terminal mode and removing/replacing the WG511 shows (I think) that something is being detected in the PCI slot "Network Controller: Intersil Corporation ISL 3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] rev 01". Is this the WG511 and, if so, how do I get it to be detected as a network device?
View 9 Replies
View Related
Apr 27, 2010
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
View 3 Replies
View Related
Jun 13, 2009
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
View 4 Replies
View Related
Jan 28, 2010
I just installed Fedora 12 on my HP a430n PC.I used to run Fedora 10, then moved to Linux Mint 7, then to Ubuntu 9.10 and now I am back to Fedora because I want to become more adept with manual package installation and adding repos.When I ran Fedora 12 immediately after then install, before running yum update PackageKit or the software update, it would use my wireless adapter (Netgear WG111v2) and connect to and stay connected to a network just fine. No hiccups.After running the updates and restarting the computer, the wlan won't stay connected for longer than 20 seconds, which is frustrating when trying to install mp3 codecs.
This seems to be a bug in the latest driver update for the WG111v2, but I might be wrong. Anyone have a fix or a way to revert back to the initial driver (I don't know what the original wireless driver was called).
View 1 Replies
View Related
Apr 17, 2010
I am having some difficulties installing a wireless usb adapter on Fedora 12. the usb adapter is: Netgear WN111v2 Wireless-N USB adapter and it has the chipset: Atheros AR9100AP. I did a intensive search on the web but i don't know how to go further. These are the steps i've tried. I installed NdisWrapper and tried the following:
[code]...
But i really have no clue what to do further. I also found this site, which seems to have all the answers: [URL]... But i have no idea how it works. I copied all the firmware files to right directory. But what is the next step?
View 1 Replies
View Related
Jul 29, 2010
how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies
View Related
Oct 17, 2010
I have got a netgear wireless PC Card WG511 made in Taiwan (not china). I have intalled it in windows w/acouple of ver. Settling on v1. I am first generation pc. maybe toold for Linux? I can't even figure out how to post in the Dam Small Linux website. But have read most of the posts in linux questions. I can't install a wireless card ;<( this is an old laptop and would be like usable if I get the *&^%$ wireless working. In fact, does anyone have a wireless card working with Dam Small Linux? I have the book but, it's not been much help. Other that telling me to add nodhcp in the boot startup. That didn't help either. I have learned alot through this misery of the wireless nic.
View 10 Replies
View Related
Jul 24, 2010
Using Netgear WPN111 with Ubuntu 10.04 getting the above up and running.
View 2 Replies
View Related
Oct 22, 2010
I want to know if it'll work on Ubuntu 10.04 before I get it?
View 1 Replies
View Related
Nov 4, 2010
I have managed to connect to the above NAS using the supplied RAIDar software from my base unit. The unit is duel boot with Ubuntu 10.10 and Windows XP. Both operating systems work with the NAS both by wireless and wired using RAIDar and any other relevant programme
However my laptop, running Ubuntu, will not find it using Raidar, the IP address in a browser nor with a file manager or any other programme. I have tried both wired and wireless connections
However if I go to "places" from the top bar, which opens Nautilus, I can access it and all the files on it.
View 1 Replies
View Related
Jun 16, 2011
I have been checking threads, Google etc. from what I have gathered I might have wasted my money on the Netgear adapter, I have not had any problems connecting to the network but I am operating at 54 MBs on my Realtek internal adapter
jasonfusaro@jasonfusaro-ML6720:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
Which one of the above is the realtek and which one is the NETGEAR? This is my first post, and I don't know if this is too much info to place in a message. Also if anyone responds with help, could you please comment with an explanation of any commands, I am new to Linux, but I am real happy and impressed and really don't wish to be a Windoean anymore, I wish to become a full fledged Linuxean.
View 9 Replies
View Related
Jul 9, 2011
I am running the 64-bit version of Ubuntu 10.10 that I have dual booted with a 32-bit version of Windows 7 and can't seem to get my Netgear WN311B wireless adaptor to work while I am in Ubuntu but obviously works fine in Windows.
View 2 Replies
View Related
Aug 10, 2011
I've been searching for help on this issue, and I've tried some things, but I can't get my connection to work.I can see the available networks, and the LED on my device is on, but when I try to connect it can't connect and asks me for the network security key again.I've installed and run the ath9k-htc installer, but I noticed no change when I did so. Is there a step I'm missing?
lsusb:
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 047f:c001 Plantronics, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
View 9 Replies
View Related
Jan 31, 2010
Get a Realtek rtl8187l based usb-adapter (such as netgear wg111v2) work in linux is not tricky, but how to get high tx power and driver stability?
You could have tried ndiwrapper, as i did, and got stuck with a kernel module pretty buggy and crashy, or could have just used the common native driver, without hi-power feature.
To achieve my zen state, i had to work around with a base native driver, a feature-filling patch to apply to it, and the only working kernel supposed to work with, 2.6.27.
That's a brief step by step path:
get the base driver (rtl8187 in our case) and decompress: [URL]
get the featuring patch "rtl8187_2.6.27.patch" from: [URL] and extract it in the base driver directory
then apply it with: ~$ patch -Np1 -i rtl8187_2.6.27.patch
remove old modules, compile and install new one (as root)
~# rmmod r8187 rtl8187
~$ make
~# make install
Now you should have a new net device (wlan#) under iwconfig you can use as usual.
To turn on the hi-power capability: ~# iwpriv wlan0 highpower 1
and set the transmission power value (may be dangerous, see below): ~# iwconfig wlan0 txpower <value of 0 to 35> # i use 30, should be around one watt
and wuel you're done you have your pen running strong and stable on the 2.6.27 kernel.
For a detailed reference and clarification about txpower sets, see the aircrack page: [URL]
View 1 Replies
View Related
Apr 3, 2010
My kernal version is 2.6.32.10-90.fc12.i686.PAE
I'm running Fedora 12.
It auto-detected the card, but it's only operating at 100mb/s. It's connected to a gigabit switch. The driver auto-installed for the card is r8169. How do i get it up to the speed is should be at? Its kinda why i bought it...
View 2 Replies
View Related
Nov 3, 2010
I have installed a Netgear WG111v3 wireless USB networking adapter on an OpenSUSE 11.3 system. I'm using ndiswrapper to run the Windows driver. Using the "Network Settings" GNOME applet (says "Network Settings - YaST" in the title bar) it shows that I have the adapter installed as wlan0, but it's not connected. However, if I go to the "Network Tools" applet (says "Devices - Network Tools" in the title bar) and select "Wireless Interface (wlan0)" from the drop-down, it says that I have an IPv4 address of 192.168.1.104. This is a plausible address that my router could have served. However, I cannot use the network interface from the box itself.
View 2 Replies
View Related
Dec 12, 2010
I have a bought a Netgear Wireless N-150 router WGR614v10. I am using my net connection via PPPoE wired on a Win 7 machine and the connection was flawless the MAC address on the router is of the Win 7 machine.
My problem is that I have an old machine PIII 600Mhz 398MB SD Ram on VectorLinux 6.0....I tried connecting the internet directly with PPPoE the connection worked fine and I could connect through the net...but now after installing the router the machine is not detected by the router(Wired). only my Win 7 (Wired) machine and my android phone (wireless) is shown in attached devices and the VectorLinux machine is not shown....
The lan card light is on on the VectorLinux machine.
typed commands like ifconfig -a, lsmod, lspci got the reading:
root:# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:09:8a:11:3h:5d
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
[Code].....
View 4 Replies
View Related
May 16, 2010
I'm running Slakware 13 (kernel 2.6.29.6) on a inspiron 1525. I use ndiswarper to use the BCM4312 wireless device without any problem but the fact that the driver does not support the Monitor mode. I therefore bought a NetGear WN111 v2 usb stick but I can't get the linux driver.
Even ndiswarper does not work but it's may be because I don't have the right .sys .ins files. (just to try)
So, I wonder if someone has already successfully manged this device working on Slackware 13?
Actually, I don't know if we can make lets say wlan0 and wlan1 working at the same time. I've try many drivers mentioned on Ubuntu forums but none of theme work with me.
Many people talk about wpa_supplicant but I don't know if I really need it to make my wn111v2 working. And what is a firmware?
View 2 Replies
View Related
Feb 1, 2010
i need help getting 64 bit ubuntu 9.04 or mint 7 to recognise my rangemax/netgear wn311t wifi adapter.the drivers work out of the box in 64 bit Vista, and will work fine in 32 bit 9.0/mint 7 via ndis wrapper.when i use the drivers from the netgear website in 64 bit 9.04/mint7 i get an error " invalid driver." I searched the net for a 64 bit driver and found driver that recongnises the card in 64bit 9.04/mint 7 but when i go into terminal the result shows that that the card is "unclaimed" (it also says unmanaged i think)
View 8 Replies
View Related
Apr 10, 2010
My wireless disconnects after around 10 minutes. It does not reconnect automatically. I've to pull out the usb dongle and then put it back in to connect again.
[Code]....
View 9 Replies
View Related
Jan 23, 2011
I've got a computer with a Netgear WG111 wireless dongle, however I don't have the setup CDs and I don't know how i'd get it working in 10.10 anyway.
View 3 Replies
View Related
Feb 2, 2011
How do I install my Netgear Wireless Adopter on ubuntu 10.10? it tries to search for it but doesn't find it.
View 9 Replies
View Related
Mar 14, 2011
System: HP Vectra VL Ubuntu Version: 8.10,
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
[Code]...
View 3 Replies
View Related
Aug 6, 2011
I have 10.04 lucid installed on a presario 2800t laptop(it's old and hasn't got much memory). Anyway, now I can't get my Netgear WNA1100 to work. I know it works right away with 11.04, but that isn't really an option for me. It's too slow on this old computer. get it working with 10.04?
View 9 Replies
View Related
Aug 28, 2010
My set up: Roku digital video player n1050 (it does not look like the ones in the manuals I have found online, and there was no manual in the box--this only has the red, white and yellow jacks on the back, plus the places to plug in the ethernet and power cables; reset is on the bottom)
Wired network Netgear wnr854t Router assigns ipaddresses to devices attached to it Production environment 7 computers regularly access this network wired 1 additional computer regularly accesses this network both wired and wireless I am posting this going through this router, so you can see it is working
Symptoms:
Power up Roku with ethernet connected In set up, I chose wired connection Roku finds the ethernet cable Roku cannot find the local network and stops Router can see the Roku box, and says it is attached as 192.168.0.7 I can successfully ping the Roku box, but not ssh into it. I can telnet into the Roku box using telnet 192.168.0.7 8080, but I do not see anything I can do from there.ng knowledge!
View 1 Replies
View Related
Aug 5, 2010
I have to buy a new modem/router.I'm looking for the Netgear DG834g. Does it works fine with Linux?Do you think it is a good modem/router?
View 5 Replies
View Related
May 24, 2011
Just got a Netgear usb stick (WNA3100). Trying to use the win driver with Debian 6. It wants an .inf file. I installed the setup on a win 7 machine and there is no .inf file that I can find. Setting here scratching my head.
View 9 Replies
View Related
Oct 30, 2010
I have a Netgear WG111v2 Wifi dongle, sadly there is no linux drivers for it. The only solution i can find is to use Ndiswrapper.
Will it be a major challenge writing a Linux driver ?
Where should i start ?
NB. I want to write my own driver for the following reasons:
Get a better understanding of Linux Device drivers. Probably, get a better understanding of C/C++ and Linux in general.
View 1 Replies
View Related
