Fedora Installation :: Device Driver For Usb To Detect Device?
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
ADVERTISEMENT
Jan 8, 2010
how to detect and install a mic device driver? i only plug and play the mic in xp.
View 1 Replies
View Related
Jan 22, 2009
I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?
View 8 Replies
View Related
Nov 10, 2010
The error "USB device 6 (vend/prod 0x603/0xf2) is not claimed by any active driver." is in dmesg every time I connect my Logitech keyboard to my system. I also tried (all with the same error):
- Memory stick
- DVD-burner
- Compaq mouse
View 3 Replies
View Related
Apr 10, 2009
I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies
View Related
Jul 28, 2010
I have installed live cd on usb pendrive. Everything works great. How can I find out which device driver it is using? Where are the device driver files stored? How do you specify the device driver when mounting a device?
View 3 Replies
View Related
Oct 31, 2010
How I do detect the usb device when I'm on cli mode? This is possible or not?
View 2 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Oct 12, 2009
When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.
View 8 Replies
View Related
May 27, 2011
i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it
View 1 Replies
View Related
Oct 17, 2010
Recently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
View 2 Replies
View Related
May 27, 2011
I use libpcap to write a program to detect network device in Ubuntu but not sucess. The result is no suitable device found. How many reasons are there for that? The code i used is the main user page.
[code]
#define HAVE_REMOTE
#define WPCAP
#include <pcap.h>
#include <stdlib.h>
#include <sys/socket.h>
[Code]....
View 4 Replies
View Related
Jun 24, 2011
My computer is Dell Inspiron N4020.And after I installed the Ubuntu 10.04 successfully,a problem occured:No wireless device appear nor the wireless signal
View 1 Replies
View Related
Apr 22, 2011
So I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies
View Related
Mar 25, 2010
I am attaching a LTO-3 tape drivce into my RHEL5 linux machine. Every time i used to restart my machine to detect the tape drive is there any way to rescan the buses to detect the newly attached scsi devices. In solaris "devfsadm" and "iostat" is there. I need the same kind of thing in linux.
View 2 Replies
View Related
Feb 3, 2010
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies
View Related
May 8, 2010
im using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies
View Related
May 30, 2011
I have a pair of special radio-devices which support SNMP, but the problem is, that if I snmpwalk those devices, I only see few generic values(sysContact, sysDescr, sysServices etc) and nothing else. Most likely I need MIB files so NMS could know what values can be asked from the radio devices? If yes, is there a possibility to get all the OID's device supports without MIB files as those devices have been out or production for years?
View 2 Replies
View Related
Aug 14, 2009
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies
View Related
Jun 28, 2010
Running Fedora 13, I cannot add my HP J4680 through the HP Device Manager. I get an error message saying that the print queue cannot be started and it asks me to restart CUPS. I tried restarting CUPS and adding the device. It did not work. The printer is on my home network wirelessly. I can add it through the CUPS web interface and print, but then I cannot access the scanner. I tried adding the device after it was already added through CUPS, but that did not work. I would like to use the scanner; I don't really care about the fax.
View 8 Replies
View Related
Sep 6, 2011
I have a FireWire camera LifeSize connected to my PC in the FireWire interface. My PC has miniPCI slot and with external converter its having a FireWire interface. Now its Ubuntu who is not showing me anything at all when i try:
$ uname -a
Linux desktop 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux
[code]....
View 1 Replies
View Related
Sep 22, 2010
How one could determine (for use in a Bash or Python script) which device (eg /dev/sda1, /dev/hda1... etc) a ramfs was loaded from when booting from a USB drive.
I have a RIPLinux/Tinycore live USB disk that automatically needs to run a script that is stored on the same USB drive but not part of the RIPLinux/Tinycore image. (Please note that I do not want to put this script into the RIPLinux image.) I therefore would like to remix the RIPLinux/Tinycore ISO to automatically run this script once it has started up. After RIP linux has booted I would like to automatically mount the USB drive that RIPLinux/Tinycore was booted from. I need help detecting which device this is.
View 3 Replies
View Related
May 15, 2011
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies
View Related
Apr 13, 2010
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies
View Related
Jun 11, 2011
I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy
[code]...
View 5 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
Aug 23, 2011
I've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
View 1 Replies
View Related
May 24, 2011
the message from dmesg for the IrDA device:
[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]...
View 1 Replies
View Related
Jan 7, 2010
here we have an older digicam (Jenoptik/Exakta Model "DC 22", if someone might want to know) that can be switched between some "PC Camera mode" and "Mass storage mode".Unfortunately, if attached to USB, it is always recognized as
Code:
UDEV [1262910483.475886] add /class/video4linux/video0 (video4linux)
lsusb tells:
[code]...
View 4 Replies
View Related
Sep 17, 2009
Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies
View Related