Slackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
ADVERTISEMENT
Jul 14, 2010
Just when I thought my hardware configuring woes were put to an end, I don't have any sound. Here is my lspci list.
Code:
debian:~# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
And the aplay -l
Code:
debian:~# aplay -l
* List of PLAYBACK Hardware Devices *
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 14 Replies
View Related
Feb 15, 2011
When I run the audio configuration I get:
The following audio device was detected:
Vendor: nVidia
Model Coporation GF100 High Definition Audio Controller
Module snd-hda-intel
but I do not hear sound.
The ALSA driver version is 1.0.14rc3
Lib package is: 1.0.17.-1.e15
Utils package is: 1.0.17-1.e15
The sound log has:
class: AUDIO
bus: PCI
detached: 0
driver: snd-hda-intel
desc: "nVidia Corporation GF100 High Definition Audio Controller" .....
The audio configuration sound test and the answer to the question No returns a message that says: automatic detection of sound card did not work. I am not sure what else is needed to diagnose the problem.
View 8 Replies
View Related
May 2, 2010
I've always run as root on Slackware, but having done away with Ubuntu for now, all of my machines including the family desktop are running Slackware. There have been several ups and downs and the last one that I know of (for now) is the HP Device Manager. It doesn't run as root so I've never noticed that it drastically slows down printing via a shared printer. Disabled the system just sends it's requests to the samba/cups server and starts printing instantly. The HP Device Manager seems to go through an intialization step each time that takes several seconds before I can even hit the "print" button.
View 11 Replies
View Related
Jun 5, 2011
I've got no sound. I'm not sure if I should post this in the hardware forum or not because i'm not completely sure that it might be hard ware. Here's the card that's in my laptop though. Raedon HD 4200 - RS880 Audio Device. And yes I made sure my sound was off mute.
View 7 Replies
View Related
Mar 27, 2010
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
View 5 Replies
View Related
Mar 7, 2010
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
View 9 Replies
View Related
Jun 6, 2011
Is it possible to access windows network printers from a VirtualBox WindowsXP client running under Ubuntu 10.10 host? The networking type is NAT. Would Bridged Networking solve the problem? If so, is there a tutorial on how to set up bridged networking for virutual box?
View 1 Replies
View Related
Feb 5, 2010
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
View 2 Replies
View Related
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
View 6 Replies
View Related
Aug 14, 2009
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies
View Related
Jun 28, 2010
Running Fedora 13, I cannot add my HP J4680 through the HP Device Manager. I get an error message saying that the print queue cannot be started and it asks me to restart CUPS. I tried restarting CUPS and adding the device. It did not work. The printer is on my home network wirelessly. I can add it through the CUPS web interface and print, but then I cannot access the scanner. I tried adding the device after it was already added through CUPS, but that did not work. I would like to use the scanner; I don't really care about the fax.
View 8 Replies
View Related
Oct 1, 2010
how to get the card number and device number on system for attched USb audio device?
View 3 Replies
View Related
Nov 8, 2010
I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".
View 14 Replies
View Related
May 29, 2011
Since my upgrade to 13.37 + VirtualBox 4.0.4 (from SBo) I'm having trouble with one of my VMs containing a PostgreSQL installation (also from SBo) which has been running fine before on 13.1 + VBox 3.2.10.
This is what happens: I'm starting an I/O heavy job on the DB that should take about an hour but never finishes because the virtual disk stops working after 10 to 40 minutes.
Code:
ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:e8:11:44/01:00:02:00:00/40 tag 0 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
lots of these
[Code]...
View 7 Replies
View Related
Dec 28, 2010
am trying to connect and list my Samsung Captivate Device in Ubuntu, but i failed everytime. Here is my environment
Launching Ubuntu 10.10 (guest OS) from Windows 7 (host OS) using Virtual Box 4.0
In the host OS (Windows 7), i have enabled USB Device Filter for Samsung_Android, and i could see that device in Ubuntu 10.10, but when i use 'lsusb', it doesn't list the samsung device.
View 1 Replies
View Related
Jan 26, 2010
pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Jun 19, 2011
I installed slackware 13.37 32 bit in a virtualbox vm for httpd web site testing. I am running the guest in slackware 13.37 64bit host with host only networking.
I can ping the guest and access the pages hosted via a web browser on the host. However I want to upload new sites to test via ftp to a dir on the guest at location such as /home/user/public_html and access them via the host. Vsftp is enabled. But how would I set it up to be able to do this?
View 3 Replies
View Related
Nov 14, 2010
Having some troubles mounting my DVD-RW after a reinstall of ubuntu. Now using 10.10.
Code:
root@Johnsky:/# wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
0 dev='/dev/scd0'rwrw-- : 'HL-DT-ST' 'DVDRAM GH20NS10'
-------------------------------------------------------------------------
So there's my scd0 sitting pretty.
Trying to mount it.
Code:
root@Johnsky:/# mount -a /dev/scd0 /media/cdrom0
mount: /dev/sr0: unknown device
root@Johnsky:/#
sr0?
Code:
root@Johnsky:/# ls -l /dev/
total 0 .....
Lets try mounting sr0 directly instead.
Code:
root@Johnsky:/# mount -a /dev/sr0 /media/cdrom0
mount: /dev/sr0: unknown device
sr0 is still an unknown device.
I'm thinking when I reinstalled Ubuntu, it made some screwy links between devices. But I have no idea how to resolve this... and there's no point in my mind to adding the DVD-RW to /etc/fstab until I can actually mount it manually to know it mounts successfully. Back when I installed Ubuntu 9.x on this machine, I never had any of these issues. It picked up the DVD-RW automatically, appended it to fstab during installation, and done. But 10.10 seems to be having some troubles my 9.x installation didn't.
View 1 Replies
View Related
Dec 8, 2010
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
View 7 Replies
View Related
Aug 7, 2010
I've been having a recurring problem on Slackware64 13.1. If I open VLC (or any other media player available for Slackware) before I open Firefox, then my sound works 100% and there's never any problem, however, if I open Firefox first, and there happens to be a flash video loading, then any other media player (mplayer-plugin, Amarok or VLC) will fail to play sound. VLC tells me:
Quote: Potential ALSA version problem: VLC failed to initialize your sound output device (if any). update alsa-lib to version 1.0.24 or higher to try to fix this issue. Now, I'm happy to do that if it will actually fix the problem, though I'll have to figure out how seeing as I'm something of a n00b. The thing is that I've not really done anything to alsa except run alsaconf on my first boot, so I'm not sure if that's really the problem I've been using Slackware64 for a few months now, I'm on my first ever install and for the most part I'm loving it. Been working through the little things that have been annoying me, and for the most part I've managed to find solutions either by reading the Slackbook, by browsing LQ or by doing a quick Google search. However, I can't seem to find any reference to this specific problem anywhere and I'm not sure what I should do.
View 14 Replies
View Related
Jul 13, 2010
I have a Win7 laptop with the latest version of VirtualBox installed. It's a dual core proc with ram to spare. So, I installed Slack64-13.1 and it rocks! I'm really impressed that Slack is running at what appears to be native speed, but in virtual machine. Hardware response is normal, WIFI and LAN are both working great for my normal tasks.So, I downloaded a few much needed patches, and new ISO image for one of my old desktop PCs. Now, my problem is I can't connect my USB cdwriter to my virtual slackware or share folders in the Win7 install with the virtual slackware. I read a few of tutorials on the Oracle VBox website, and several of the ones here on LQ, and none of them seem to solve my problems.
View 3 Replies
View Related
Mar 10, 2010
I installed 11.1 when it first came out. The PC I used gave up the ghost and I bought a refurbie, HP xw4100 and installed the 11.1 drive in it. All works except Internet connection. I am befuddled, bemused, confused and at a complete loss! The router on USB is not detected.
Boot Time - Status blinks, LAN is OFF and remains OFF. DSL blinks several times.
Booted - Status continues and DSL blinks.
YaST (NetworkManager is useless)
Network Devices - DSL
Config Overview
- DSL Devices - Not detected
- Add - PPP over Ethernet
Mode Dependent Settings
- Ethernet Card
- DS: Connection - Unknown - No IP address assigned
- Configure Network Cards = On Hotplug
Network Settings
- Enable IPV6 (as previously set)
- DHCP Client Options - left blank
Overview
- Unknown Device
- IP Address - Not configured
- Unknown Network Device (no hwinfo)
Edit
- Dynamic Address - Zeroconf
Next
- Loop back to Overview - Unknown Device
View 6 Replies
View Related
Apr 21, 2010
I am sharing files between three computers: ubuntu pc , windows xp pc and windows vista pc.( using samba ) Windows xp displays ubuntu pc correctly but vista does not,ubuntu pc is displayed as unknown device.Despite of this i connect vista and ubuntu via ip. I would like see my ubuntu pc in windows vista network.
View 2 Replies
View Related
May 15, 2011
I have an Ubuntu guest installed on Virtualbox 4.0.4 running on Windows 7 Home Premium. I have two firewall rules for Vbox which allow any, any inbound for both TCP and UDP and those rules have edge traversal enabled. I have host ports 9080 and 9022 forwarded to 80 and 22 on the guest. The Win7 box is on an Ethernet connection
After some testing, I have a netbook with a Wifi connection and Ubuntu netbook remix which cannot make an ssh connection to the Ubuntu guest.
But, the same netbook can telnet to port 9080 on the Win7 machine's address and successfully connect to a web server running on port 80 of the Ubuntu guest.
In order to check this out, I ran initctl stop ssh on the Ubuntu guest, verified thagt port 22 had no listeners, and ran ssh with /usr/sbin/sshd -d -e. This shows various bits of debug info from the console. Then I ran Putty on the win7 machine to connect to port 9022 on it's own IP address (that it got from DHCP) and made a successful connection to the guest Ubuntu.
The variable that I don't know much about is the landlord's cable router setup, but I can't figure out why that would block packets to 9022 but not packets to 9080.
View 1 Replies
View Related
Jul 1, 2011
When I try to change the resolution, it only shows 800X600 and 640X480 or something similar, nothing regarding a custom resolution. When I use the "Install Guest Additions" it won't mount because of some error, and so I can't open it, and even if I could mount and open it *I've tried it in other distros that don't automatically install it for you* I have no idea what to use. I've tried all of the .sh, even the autorun.sh and giving it executable permissions, and it STILL doesn't work. Perhaps I'm missing something, or there's a documentation out there that I can't find, but I can never get them to work. How can I fix this problem? I know in sbopkg, there's 32-bit Virtualbox Guest Additions but that doesn't work. The reason why I installed the 64-bit one is because I don't have 6 CDs to spare and I'm almost out of bandwidth and it has to last me a week. *I think around 200GBs out of 250GBs taken up so far, or more*
View 14 Replies
View Related
Mar 8, 2010
How should I enable USB device in VirtualBox? I tried to add devices in Setting-->USB of VirtualBox. But still cannot add any yet. I can see those I added, but grey that I cannot check. I'm running Windows XP by VirtualBox under Ubuntu 9.10.
View 13 Replies
View Related
Jul 12, 2010
I am running slackware-current and using the Novatel usb760 3G modem. before i use kppp to "dial out" I have to eject the device. It works fine except that i periodically get a popup window with:
"Failed to eject "VZAccess Manager Device to unmount is not in /media/.hal-mtab so it is not mounted by HAL."
it happens every 30 minutes to every 10 seconds. anyone ever experience something like this?
View 1 Replies
View Related
Nov 22, 2010
i try to install mandriva on my computer bu after the licence i gat this error message. une erreur est survenue INTERNAL ERROR: unknown device hdc
MDK::Common::Various::intenal_error()called from /urs/lib/libDrakx/devices.pm.186
Devices::entry()called from /urs/lib/libDrakx/devices.pm.201
Devices::make()called from /urs/lib/libDrakx/fsedit.pm.166
View 1 Replies
View Related
