General :: Xsane Is Unable To Detect Scanner Device?
Feb 3, 2010
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.
But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...
I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)
Whenever I switch on my scanner (Epson V200) then it launches Xsane automatically. Now I know Xsane is wonderful, but often I want to use Epson's iscan instead, and for other users I prefer Simple Scan. Another thread would be a good place to discuss the reasons.
So I would like to stop my scanner launching anything when switched on.
I've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:
Code: Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41
Using xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.
I have a Fujitsu ScanPartner 93GX scanner that freezes Xsane when I try to use it. The same thing happens to Simple Scan too.
When use sane-find-scanner I get the following:
Code: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. found SCSI scanner "FUJITSU M3093GX 02" at /dev/sg0
I started to think I might need a different driver. I found a driver (sane-fujitsu.5) at mangpages (link), but there are no instructions as to what directory to place it in, what files need to be modified to point to it, etc.
I got a new Canon LiDE 110 scanner. It's a very cheap device but the important thing is that it is listed as "completely supported" in the SANE site. I had to compile the latest SANE from sources, but I have no problems with compiling from sources, and now everything runs from the version in /usr/local/... The problem is that "scanimage -L" doesn't detect the scanner. I also don't see any scanners under /dev/... I think it might help if I pass the scanner device with the -d option to scanimage but I don't know how to find out what the device file of it is.
This is what I see with lsusb: Bus 005 Device 004: ID 1c4f:0003 SiGma Micro Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 04a9:1909 Canon, Inc. Bus 001 Device 003: ID 046d:080f Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The scanner is on Bus 001 Device 007.
The printer of my multi Epson CX5600 works fine, but when I run xsane I get the "No devices available" window. I tried running it as root with the same result. I have installed "iscan-firmware-2.1.1-1.fc12 (noarch) but it still wont work.h kernel 220.127.116.11-147.fc13.i686.
I have a Brother mfc-8890dw that is attached to my local area network.I can ping the static ip address of the printer and receive a reply. I can print from all applications.I cannot scan. I did modify the rules files but that only appears pertinent for usb attached devices. What do I need to do to get XSane to recognize my Ethernet attached scanner/printer?
HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.
I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?
I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:
So I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
I am having trouble getting my HP 6310 All-In-One scanner working using it on its ethernet interface, set to 192.168.1.208. Installed fine under cups for printing. hplib installed. I do the following.~ $ hp-makeuri 192.168.1.208HP Linux Imaging and Printing System (ver. 3.9.4b)Device URI Creation Utility ver. 5.0Copyright (c) 2001-9 Hewlett-Packard Development Company, LPThis software comes with ABSOLUTELY NO WARRANTY.This is free software, and you are welcome to distribute itunder certain conditions. See COPYING file for more details.
CUPS URI: hp:/net/Officejet_6300_series?ip=192.168.1.208 SANE URI: hpaio:/net/Officejet_6300_series?ip=192.168.1.208 HP Fax URI: hpfax:/net/Officejet_6300_series?ip=192.168.1.208
I have the 64 bit 13.0 version installed. I have an hp f4440 all-in-one printer installed and connected via usb. I downloaded and installed the new hplip 3.9.12 after removing the older hplip 3.9.4 version. I used CUPS to install and setup the printer. No problems, I let it search and it found the printer right away. When I ran XSane it could not find the device. I clicked help and it gave some steps. The first being to try as root. I opened a root terminal and entered xsane, it found and opened after a warning about running it as root. I checked and my user name and root are entered in the scan group.
The one thing that has stopped me switching over to Ubuntu was getting my scanner to work. I finally resolved this issue. Here are the set I followed to get it working. When trying to scan with XSane I would get the device not found alert. Using the sane-find-scanner command would find the scanner as a USB device. found USB scanner (vendor=0x04b8, product=0x0851) at libusb:001:006 I amended the "rules" file for xsane /lib/udev/rules.d/40-libsane.rules added the two following lines
Now I have a fully working colour scanner, bye bye windows
Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.
I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.
I am having some issues with 11.04. My print/fax/scanner is connected directly to the ethernet line, and 11.04 cannot detect the scanner portion through the Simple Scan program. I am using an HP Officejet 4500.
I used to be able to scan perfectly fine when using 10.10, and it just won't work anymore I have the HPLIP toolbox installed, and I can't get it to open/run!
I am attaching a LTO-3 tape drivce into my RHEL5 linux machine. Every time i used to restart my machine to detect the tape drive is there any way to rescan the buses to detect the newly attached scsi devices. In solaris "devfsadm" and "iostat" is there. I need the same kind of thing in linux.
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.