Fedora Installation :: Select Device Driver To Load ?
Apr 10, 2009
I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies
ADVERTISEMENT
Oct 12, 2009
When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.
View 8 Replies
View Related
Jan 22, 2009
I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?
View 8 Replies
View Related
Apr 16, 2010
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
View 2 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
Jan 12, 2009
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
View 3 Replies
View Related
Feb 14, 2011
For some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
View 5 Replies
View Related
Mar 26, 2009
I'm installing FC-686 onto a Dell 6300 server with several drives, one 300+gig and about 5 9gig drives. The install disk loads fine but when I select install to HD it tells me that there is no device to install to. Obviously doesn't see the HDs. I have used the internal program to format the HDs, I think I selected RAID 3. I wanted to use all the HD space as my data is not critical requiring RAID 5. Unless someone convinces me otherwise. I did this also because I wanted to maximize disk space. What else to do with 9 gig drives?
View 4 Replies
View Related
Jul 7, 2010
I known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
View 1 Replies
View Related
Jun 14, 2011
I've been trying since ever to install the new ubuntu on my FakeRaid controller and I'm really starting to get frustrated. After restarting, i get the message "reboot and select proper device.." So my first tough was that my grub was not installed properly. So i ran the boot_info_script.sh that I found in the forum and here is my output. It says that the boot loader is not installed and my Raid is screwed up. I went look in the BIOS and everything looks fine. Ive put the result.TXT from the script.
Quote:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of
/dev/mapper/ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 000.
ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 0001: ________________________
[code]....
View 2 Replies
View Related
Jan 30, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System
/dev/sda1 * 1 6 48163+ 7 HPFS/NTFS
/dev/sda2 7 34329 275699497+ 7 HPFS/NTFS
[Code].....
View 2 Replies
View Related
Jan 31, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS /dev/sda3 34330 38227 31310685 83 Linux /dev/sda4 38228 38913 5510295 db CP/M / CTOS / ...
Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x99b707d2
Device Boot Start End Blocks Id System /dev/sdb1 1 38912 312560608+ 7 HPFS/NTFS
Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sdc1 1 6 48163+ de Dell Utility /dev/sdc2 7 38227 307010182+ 7 HPFS/NTFS /dev/sdc3 38228 38913 5510295 db CP/M / CTOS / ...
and here is my menu.lst
[Code]......
View 2 Replies
View Related
Apr 28, 2009
I have two BT USB adapters on my fedora9 (2.6.27.19-78.2.30.fc9.x86_64).How i can tell which of them to bind as /dev/rfcomm0 device.It seems that rfcomm.conf doesn't say me too much about.
View 3 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Apr 29, 2011
I just did a clean install of 11.04. Now when I try to boot the machine I get the following error: Quote:
error: no such device
error: no such disk
error: you need to load the kernel first
Then I am taken to the Grub menu. Selecting anything from the Grub menu brings this error back up. So now I'm stuck with a computer that won't work.?
View 9 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Jun 17, 2010
Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that
Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8
[code]...
how do i get the driver to load.
View 9 Replies
View Related
Mar 22, 2011
I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.
Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)
I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.
How can I get KDE back and running, using either the proprietary or the open-source driver?
View 2 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Mar 28, 2011
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies
View Related
May 1, 2011
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
View 5 Replies
View Related
Jan 8, 2011
Is there any way to select which output device a program uses? I notice many Ubuntu programs lack the choice to choose where the sound is outputted, for example Rhythmbox and Exaile.I have 3 sound outputs (Internal, PCI, HDMI) connected and I'd like to for example use the PCI card as default audio device but play music from Rhythmbox through the internal motherboard output.
View 2 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Aug 8, 2010
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
View 3 Replies
View Related
Oct 18, 2010
I recently upgraded to 10.10 from 10.04 on my x86_64 system. The upgrade went fine except it cannot load the driver for my Matrox M9148. ("m9x")I simply get a "Cannot load driver" error. (there is more to it, will paste when I finish work)Basically the driver is there and in place, it loads it but cannot use it.When I go to reinstall the driver again manually, it dies with an error only supports Xorg up to 7.5So, now I see this is an Xorg and driver compat issue.I have reported it to Matrox and am awaiting a reply.
In the mean time though, since I need my machine working, is there anyway around the issue, or could I even roll back xorg to whatever it was in 10.04 to get the drivers working again?
View 4 Replies
View Related
Jul 6, 2010
I use a USB webcam with a built in microphone. It works fine, but every time I plug it in I have to go to sound properties and select it as the input device. There are no other input devices present on my system. Since it's the only one there, is there any way to get it to automatically select when I plug it in? If not, I think that would be good functionality to add. Does anyone know who or what team to contact about that?
View 3 Replies
View Related
Oct 1, 2010
i know skype on Linux is crap but i have no choice as i now have only Ubuntu installed on this pc & I NEED SKYPE.so with the new version how do i select a particular sound device.i ask because skype only lets me select a specific sound 'platform' (pulseaudio).i have a motherboard with on-board sound & a USB voip phone (us robotics) and it the usb voip phone i want to use solely for skype
so is there something i can tell pulse audio that i want skype to ONLY use the usb phone or do i have to use the stupid sound preferences to change the system wide device to the usb phone which makes the whole thing a hindrance because i have no idea when someone calls me & when i have to quickly change the settings then turn off music then try to answer the call the person calling has gone!!!i like to have music playing in the background out of my hifi & the error noises come out of the usb phone as well when this is selected & to be honest it makes having a pc setup with multiple devices pointless and a hindrance
View 2 Replies
View Related
Dec 25, 2015
Now, my issue is that I have no access to ethernet in my apartment so I need to rely on wifi for my install. But during the install when it is looking for the network hardware it never sees the TP-Link Dongle and never asks if I wan to load the firmware. I even tried it with the CD image that has the non-free drivers included but it never asks for the drivers. Any other distro, like Linux Mint 7.3, sees the dongle fine.
So is there a way to force load the realtek-firmware drivers during install?
View 14 Replies
View Related
May 27, 2011
i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it
View 1 Replies
View Related
Apr 3, 2010
Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies
View Related
