Ubuntu :: Unable To Detect WMID Device
Apr 22, 2011
So I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies
ADVERTISEMENT
May 8, 2010
im using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies
View Related
Jul 1, 2011
I'm not 100% if that's what it says, because it goes by in like a second.
But when I boot up my computer, the screen stays black for a while, then gives me that error. But then it loads up Ubuntu successfully with no problems.
I was just hoping to fix this, because it causes it to take a while to boot up.
View 5 Replies
View Related
Feb 3, 2010
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
May 27, 2011
I use libpcap to write a program to detect network device in Ubuntu but not sucess. The result is no suitable device found. How many reasons are there for that? The code i used is the main user page.
[code]
#define HAVE_REMOTE
#define WPCAP
#include <pcap.h>
#include <stdlib.h>
#include <sys/socket.h>
[Code]....
View 4 Replies
View Related
Jun 24, 2011
My computer is Dell Inspiron N4020.And after I installed the Ubuntu 10.04 successfully,a problem occured:No wireless device appear nor the wireless signal
View 1 Replies
View Related
Jan 8, 2010
how to detect and install a mic device driver? i only plug and play the mic in xp.
View 1 Replies
View Related
Apr 13, 2010
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies
View Related
Sep 6, 2011
I have a FireWire camera LifeSize connected to my PC in the FireWire interface. My PC has miniPCI slot and with external converter its having a FireWire interface. Now its Ubuntu who is not showing me anything at all when i try:
$ uname -a
Linux desktop 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux
[code]....
View 1 Replies
View Related
Oct 31, 2010
How I do detect the usb device when I'm on cli mode? This is possible or not?
View 2 Replies
View Related
Mar 25, 2010
I am attaching a LTO-3 tape drivce into my RHEL5 linux machine. Every time i used to restart my machine to detect the tape drive is there any way to rescan the buses to detect the newly attached scsi devices. In solaris "devfsadm" and "iostat" is there. I need the same kind of thing in linux.
View 2 Replies
View Related
May 30, 2011
I have a pair of special radio-devices which support SNMP, but the problem is, that if I snmpwalk those devices, I only see few generic values(sysContact, sysDescr, sysServices etc) and nothing else. Most likely I need MIB files so NMS could know what values can be asked from the radio devices? If yes, is there a possibility to get all the OID's device supports without MIB files as those devices have been out or production for years?
View 2 Replies
View Related
Sep 22, 2010
How one could determine (for use in a Bash or Python script) which device (eg /dev/sda1, /dev/hda1... etc) a ramfs was loaded from when booting from a USB drive.
I have a RIPLinux/Tinycore live USB disk that automatically needs to run a script that is stored on the same USB drive but not part of the RIPLinux/Tinycore image. (Please note that I do not want to put this script into the RIPLinux image.) I therefore would like to remix the RIPLinux/Tinycore ISO to automatically run this script once it has started up. After RIP linux has booted I would like to automatically mount the USB drive that RIPLinux/Tinycore was booted from. I need help detecting which device this is.
View 3 Replies
View Related
Mar 17, 2011
I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
View 10 Replies
View Related
Aug 13, 2011
I am running 11.04 with a dual boot of vista. I am also running virtualbox (downloaded from oracles site) I installed the extension pack from their website, I have added a new filter and I am in the user group but still virtualbox will not see the usb ports or the device plugged in. The reason for running virtualbox is if I can get the usb to work, I will then remove vista completely from my system and just virtualbox for the only two programmes that do not work in Ubuntu.
View 9 Replies
View Related
Mar 14, 2010
I have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies
View Related
Apr 6, 2010
I'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
View 8 Replies
View Related
Jun 20, 2010
Ubuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
View 1 Replies
View Related
Aug 3, 2010
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
View 2 Replies
View Related
Sep 17, 2010
I'm running Karmic Koala on my laptop and I'm attempting to connect to my university's secure wireless network. I was directed here by the university's computer help websiteI've followed all the steps, but when I open the wireless network authentication applet and try to browse to my private key, I can't find it. The "chose your private key" window claims to be looking for "DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12)," and while my private key file shows up as a .p12 file when I open that location with my file browser, the file doesn't show up when I try and browse to it from the authentication applet. I've attached an image which shows the file in one window, but not in the other f clarification.
View 7 Replies
View Related
Mar 30, 2010
Ubuntu wont detect my screen (mag bf22) correctly..that causes poor resolution (1152*864 max) my screen is able to at least a 1600*1200 resolution (witch i use in my windows boot ) is there anything i can do in order to fix or increase the resolution ?.. i have already installed the drivers correctly
asus p7p55d
intel core i5 750
nvidia geforce 9500gt
wd640GB black caviar
View 9 Replies
View Related
Apr 20, 2010
I'm trying to setup a virtual machine running Ubuntu server 9.10 in Hyper-V on a windows 2008 server.
However it can't detect the network adapter (Virtual NIC uses Broadcom NetXtreme Gigabit Ethernet).
After doing some research on a Windows forum i was told to try using the legacy network interface. Annoyingly 64bit edition doesn't seem to have this.
Anyone know how i can get around this?
View 2 Replies
View Related
Apr 24, 2010
Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies
View Related
Aug 10, 2009
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies
View Related
Aug 3, 2010
I am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 Replies
View Related
Sep 10, 2010
I run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
View 2 Replies
View Related
Apr 28, 2011
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
View 1 Replies
View Related
Feb 12, 2011
I want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
View 1 Replies
View Related
Mar 1, 2010
I have a external usb 20Gb hdd. It was a ntfs partition but i could'nt mount it, so I try with a ext3 partition, because with centos it's mount automaticly, but... for some reason that I don't know, even with a ext3 partition my centos don't detect my external usb hdd, howerver I already try to mount it on ubuntu to see if it work, even on windows with some programm to recognize ext3, it was alright, but why can't i mount it on my centos?
View 13 Replies
View Related
