Fedora :: Driver / Software For Automatic Feeder Scan Device?
Oct 17, 2010
Recently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
View 2 Replies
ADVERTISEMENT
Jan 11, 2011
I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..
View 1 Replies
View Related
Jan 9, 2011
I have installed a new network multifunctional device Samsung CLX-3185FN using the drivers provided by the manufacturer (Samsung Unified Driver). The printing over the network works fine, I can administer the device using browser. The only problem I have is using scanner over the network. It works fine if I disable firewall, but is blocked with firewall enabled. I can not figure out which ports or port-range I must enable for this scanner. Do you have any information on this one or how can I found out the necessary ports to open?
View 3 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
May 4, 2010
know how to get ADF ( Auto Document Feeder ) on a printer to work from command line?
Running F12 and my printer is HP OfficeJet 7310xi
---------- Post added at 10:57 PM CDT ---------- Previous post was at 10:17 PM CDT ----------
I found this scanimage -b --batch-scan=yes > output.pnm
View 2 Replies
View Related
Jan 26, 2010
I just bought an hp 6500 wireless printer, and after taking 5 minutes to set it up (amazing how easy it is to get hardware working that supported by Linux) I was happily printing...But- I haven't managed to get it to scan from my desktop pc running 9.04. Tells me no device is found. I added the printer to a laptop running 9.10, and it scanned perfectly straight away...
I've been through the Ubuntu help documentation and haven't found a solution.I think that maybe Turbo Print (for our old Canon printer) might have messed something up. I had to uninstall Turbo Print to get the printer to work (it hijacked Ubuntu's built in printing stuff).
View 2 Replies
View Related
May 1, 2010
The one thing that has stopped me switching over to Ubuntu was getting my scanner to work. I finally resolved this issue. Here are the set I followed to get it working. When trying to scan with XSane I would get the device not found alert. Using the sane-find-scanner command would find the scanner as a USB device. found USB scanner (vendor=0x04b8, product=0x0851) at libusb:001:006 I amended the "rules" file for xsane /lib/udev/rules.d/40-libsane.rules added the two following lines
[code]...
Now I have a fully working colour scanner, bye bye windows
View 6 Replies
View Related
Sep 14, 2010
I have the above bt dongle and I am unable to get the device to scan for remote devices. The dongle and bluetooth software is recognized and from a system point of view is working. Using Suse 11.3 64bits
[Code]...
When I scan the blue led comes on solid and goes back to blinking afterwords but nothing is found. I did try another adapter and the bluetooth worked. BTW The Bluedevel application is real nice and works much better then the kdebluetooth app,
View 1 Replies
View Related
Jan 22, 2009
I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?
View 8 Replies
View Related
Apr 10, 2009
I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies
View Related
Nov 10, 2010
The error "USB device 6 (vend/prod 0x603/0xf2) is not claimed by any active driver." is in dmesg every time I connect my Logitech keyboard to my system. I also tried (all with the same error):
- Memory stick
- DVD-burner
- Compaq mouse
View 3 Replies
View Related
Jul 28, 2010
I have installed live cd on usb pendrive. Everything works great. How can I find out which device driver it is using? Where are the device driver files stored? How do you specify the device driver when mounting a device?
View 3 Replies
View Related
Nov 23, 2010
I have broadcom wireless card in my system. I got the driver from broadcom site. I compiled it against my kernel and the module works fine. How could I automatically load this driver at startup. I followed the instruction found in the driver source README file. But its not working. The steps I followed are as follows:
# load driver
# cp wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
# depmod -a
The same steps I followd in 2.6.26 kernel and it worked fine. Now its not working in my new kernel 2.6.32.For manually loading it I have to remove the ssb driver and the download this one. Otherwise it will not work. So I tried adding ssb to /etc/modprobe.d/blacklistle. But that driver loads during startup. So each time I have to manually unload the ssb driver and insert the new one.
View 4 Replies
View Related
Apr 7, 2011
Steps that the pdf file from ati says :
To install the ATI Proprietary Linux driver using the Automatic option, follow these steps:
1 Launch the Terminal Application/Window and navigate to the ATI Propri-etary Linux driver download.
2 Enter the command sh ./ati-driver-installer-8.573-x86.x86_64 to launch the ATI Proprietary Linux driver installer.
The ATI Proprietary Linux Driver Setup dialog box is displayed It shows the ati with the penguin. Mine doesnt show that for the file: "ati-driver-installer-11-3-x86.x86_64.run
This is the driver that I got from the website. But Im still having issues with Wow not working or recognizing that I have a great card (XFX HD 4770).
View 8 Replies
View Related
Apr 8, 2011
I was recently given an HP Officejet 6310 all-in-one. While I could care less about printing, I have a laser and can use wife's inkjet for the rare times I need color so any ink cartridges in this one would just dry out. What I really want is to be able to use scanning over the network and hopefully the document feeder.
So I can scan multiple docs as a batch instead of having to change by hand. Has anybody done this before with Slackware? I went to HP's site and didn't find Slackware listed for hplib download. I went to the sane mailing list, but my posts keep getting bounced due to "greylist", and that never happened before.
View 6 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Dec 12, 2009
I just installed AVG antivirus, but I didnot see shortcut in the MENU.How can I run it?Meybe I need some terminal command to run it and scan my HDD?
View 13 Replies
View Related
Apr 6, 2010
If I were asked to write a linux device driver for a pen, How should I start?
View 4 Replies
View Related
Jul 9, 2010
Quote:
Originally Posted by anishakaul
When you copy paste the Makefile from post 7, make sure you delete the spaces shown in RED below by Backspace key and then press TAB
Code:
obj-m += hello.o
all:
........make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
........make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
how to write a device driver for USB
View 9 Replies
View Related
Oct 11, 2010
I know, I know..."How long is a piece of string"?
I have one of these devices:
[URL]
Of course, it's Windows only, and XP only at that. However, the data that needs transferred between the device and the computer should be fairly basic, unless it offloads a lot of processing to the computer. I'm not a programmer, nor do I play one on TV, but I have written some fairly complicated microcontroller programs and some basic Java GUIs. Besides writing the actual code, how hard is it to do whatever needs done to make a Linux device driver, apart from the code to make the device work?
View 2 Replies
View Related
Nov 30, 2010
Is there an easy example of a block device driver I could follow as a guide to write my own module?
View 5 Replies
View Related
Jan 14, 2011
How to do device driver programming in Ubuntu 10.04?
View 2 Replies
View Related
Mar 31, 2010
I've a problem with character device mounting. I've a character device module code. Here is the code
Code: /* chardev.c: Creates a read-only char device that says how many times
* you've read from the dev file
*/
#if defined(CONFIG_MODVERSIONS) && ! defined(MODVERSIONS)
#include <linux/modversions.h>
#define MODVERSIONS
[Code]...
View 1 Replies
View Related
Jan 8, 2010
how to detect and install a mic device driver? i only plug and play the mic in xp.
View 1 Replies
View Related
Jun 14, 2011
I wrote device driver to USB device, I can see it is alive and sending the data that I set it to send from the shell
Code:
cat /dev/myDev
How can I read from the device using C code?
I've tried to open it as a file and read it's content to buffer but noting returns..
Code:
char bufferin[500];
FILE* myDev = fopen("/dev/myDev", "r+");
size = fread(bufferin, 500, 500, myDev);
View 2 Replies
View Related
Jul 25, 2010
It's easy to bind a device to a usb driver by doing something like
Code:
modprobe driver vendor=vid product=pid. I'm wondering if this can be done with a compiled-in module: is there a way to dynamically tell Linux to use a specific module for a device?
View 1 Replies
View Related
Jan 18, 2010
I have an application that reads data from a medical device connected using usb.
I am writing the driver for this device since it is a vendor specific device.
I am using libusb v0.1 API and get notification to the application when the device is connected/disconnected.
I am using Linux Ubuntu with kernel 2.6.*
View 1 Replies
View Related
May 2, 2010
I am facing a serious problem.. i want a linux-device driver to work on windows is it possible.. see windows has device driver files as .sys and linux has .ko so is it possible..??
View 5 Replies
View Related
Mar 3, 2010
If I were asked to write a linux device driver for a pen, How should I start???
View 5 Replies
View Related
