Fedora Installation :: GRUB Hangs And System Don't Loading After Installation?
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
here are my specs...AMD Athlon xp 2200+,1.80 Ghz,736 mb of ram,10 gb hard disk&Nvidia GeForce2 Integrated GPU...actually it hangs up after loading that bar or sometimes before loading itselfshould i opt for older fedora if so which version i even tried fedora 11 kde but it hangs after booting up
After I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
I am trying to install fedora on my semi aging PC. It installed fine and prompted me to reboot. So I did, but then as soon as it tries to load the grub menu, it gives me the following error: no such device: 2cb414b7-7620-48a9-93af-f03aec3495e4How do I restore grub and make it work? Right now I am using the livecd to type this. I do not really need the grub loader since I am only running one OS, which is currently fedora. I recently had Ubuntu 10.04 which did not have grub (at least it is not shown during the boot) and suited me more than fine.
I am having difficulty loading fedora 14 with nvidia 7300gt. I have lots of text on the screen but I cannot enter anything then system hangs there only. The same system runs fine with windows XP The same system runs fine when I use onboard graphic card and disable nvidia. I installed the fedora 14 by disabling nvidia graphic card and used onboard grphic card. I had exactly the same problem with ubuntu, I was not even able to boot from live cd with nvidia. Now I want to use my nvidia graphic card for fedora.
I've attempted to upgrade my FC9 machine to the latest Fedora 12. I downloaded the iso image onto DVD and booted from the DVD into the installer GUI. Everything proceeded flawlessly until I tried to reboot from the new installation on the hard drive.When rebooting, the word GRUB appears and the system hangs. I've rebooted in rescue mode and the grub.conf appears to make sense, although I can't say that I understand all the entries. Based on some research, I suspect that the problem is ocurring even before grub.conf get read.
Can someone give me a tip on where to begin? I don't expect a detailed answer, but I don't even know where to get started. As far as I know, I have no unusual hardware configurations. No RAID, no booting from USB. The system is old (bought around 2002), but has plenty of memory and storage. One possible clue: my USB keyboard would not work during the installation phase, and I had to replace it with one that plugged into the PS/2 port. USB mouse seems to be fine.
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
I upgraded F14 to F15 using installation DVD. I have been upgrading since F11 with no problems. Upgrade went well, no issue. After the reboot, the system hangs after the last line systemd.
These are last lines from boot.log: Starting LSB: start and stop xinetd... Started LSB: Mount and unmount network filesystems.. Starting Permit User Sessions... Starting xinetd: Started Permit User Sessions. Starting Display Manager... Started Display Manager. [OK] Started LSB: start and stop xinetd.
Right now I am on system rescue CD, can mount partitions and read logs. I would like to avoid fresh installation if possible.
Here's my problem, i have 1 Ubuntu cd, (8.10, free cd), 1x 9.10 32 bit from a friend, and a 64bit 9.10 from a friend. Also i have downloaded 9.10 64bit ISO, (making sure the md5 was correct)This is what ive tried: - Installing inside windows, cd - Installing inside windows, iso mounted - Installing via cd on boot - Installing via usb on boot- Booting from cd/usb, like testing, and install from that (but got to loading screen..)Ive tried the above with all the Ubuntu's mentioned.Yet all have got to the Loading screens and just stopped.With the USB one, once (it had casper on it?), it had errors such as IO, memory buffers etcSo why doesnt either 32 or 64 bit work on my system, is there something i missed?
trying to install ubuntu on a 2nd partition on a Dell D630. The OS currently on it is Windows 7 Enterprise. I've used Windows 7 to repartition and have 80GB available for the Ubuntu install but when I put the CD in to run it gets detected as a bootable CD and starts to boot but freezes after Loading...I've left it for 2 hrs and it never progressed past that screen. I've also downloaded and burnt the ISO three times (twice in the 64 bit version and once in the 32). In all cases the install never advances. I've also tried a USB install but couldn't get that to boot
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
I got an Asus M3A78-T motherboard last year, along with a Phenom 9650 CPU and 2GB of RAM. I originally tried to install Sabayon, but it would occasionally hang while running. I decided to give Fedora another try (wasn't happy with FC4 a few years back) at the constant chiding of my friend.
My first try was with the x86_64 Fedora 10 ISO, using an IDE hard drive and CDROM. It would hang a little bit into something like 'copying system files, at the same place every time. Thinking it was a bad burn, bad iso, or something (checksum and image verification passed) I went ahead and got the DVD ISO. The DVD would always hang a little bit into "Formatting file system." At this point, I have tried EVERY other combination of hardware - swapped out ram, CPU, PS, bought SATA hard drive and DVDROm drive, unplugged the mouse, and even the case pigtails for USB and Firewire. It always hangs in the same place. Somewhere along the process, I took the motherboard back and exchanged it for a new one. Still fails, and in exactly the same place.
The system hang is a hard lockup. Mouse freezes, no keyboard activity (even LED status changes.) The drive activity LED will go out and the progress bar stops advancing.
I'm surprised I'm not seeing anyone else with this problem - I thought this board was a bit more prevalent, but I'm guessing not! What's my next step? I would create a bug report, but I don't know what subsystem is causing the hang. I suspect SATA drivers, but I'm not sure how to test that.
And one other clue - I get a scrambled video screen before it comes up to the first X install screen:
It only lasts for 5 seconds or so, then comes up okay.
I have a fancy new Quad Core Xeon machine here that I'm trying to install F10 x64 on. The installation went fine. When it reboots the first time, though, I get the dreaded Error Loading OS.
So I dug up my bookmark of the awesome Grub HOWTO here and followed the steps to install Grub manually. Alas, I get the same result after installing it. Even tried doing a makeactive (hd0) just in case, but no luck.
I did more searching and searched for "raid install" but didn't find anything helpful. So here I am... hoping somebody has some insight.
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
I want to use my BootIt NG boot menu. How would I go about installing Debian 5.0.3 and prevent Grub from loading into MBR? I don't remember being asked by the installer where to put Grub. Unlike Fedora where you can choose MBR or boot section of the target partition. Debian 5.0.3 -
I'm installing Ubuntu 10.4 DTE on an Acer netbook. The netbook came with Microsoft Windows installed and I'm adding Ubuntu via wubi on a USB thumb drive.
I'm almost done and it is configuring grub-pc. The last line is: Setting up grub-pc (2.98-lubuntu7) ... Then it hangs.
On the web, I find numerous bug reports about my situation, but no work arounds. What do I do?
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
The follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
I've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)
When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?
Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).
I just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
