I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
A few days ago I installed openSUSE 11.4 on a 1TB HP external hard drive. I have some very important files for school and personal work on my main hard drive, running windows 7, so I made sure the installation only affected my external hard drive. With the external hard drive plugged in it boots just fine but when it is un-plugged it says Grub loading stage 1.5. Error 21 and it won't do anything. This kind of pisses me off because there were no warnings and nothing was supposed to happen to my main hard drive. But this has already happened and now I want to know if there is any way I could fix it so I can boot windows 7 normally and still boot openSUSE with the external hard drive plugged in.
I just installed LXDE by pluging the P-ATA drive into my current PC (with my 2 S-ATA drives being plugged in). Not worked first time, probably because I pushed the drive too hard into the old PC. Formatted again, installed LXDE again (this time my S-ATA drives plugged out). Works fine with the old PC, but when I try booting from my current PC now it says: "Grub loading stage 1.5 ... Grub Error 21". No menu, nothing ... And because I plugged my S-ATA drives out, when installing LXDE the second time, the config file, grub is probably searching for on the P-ATA drive, is somewhere in nowhere. Googled it 2 hours ... Yast2 Bootloader and grub-install are just trolling me. The drive I installed LXDE (32-bit) on, is an old P-ATA, with first 30 GB, then suddenly 80 GB (don't ask, I don't know either. First formatting was 500 MB swap and the rest Ext4. Second formatting was 1011 MB swap and the rest Ext4.
I'm trying to install Debian Lenny on my new Dell XPS 8100 Desktop with 2 x 1To SATA HD. (No Windows or any other OS install is present on the system) The Bios allows me to change the SATA mode to either "ATA" or "RAID"
- When SATA mode is set to RAID, the installation goes without issues, but when it comes to load into the system, I've got that Stage 1.5 Grub Loading... Error 2 problem. I assume this is due to the Bios "RAID" configuration. I then switched the SATA mode to "ATA" in the Bios and now I can see the menu that allows me to boot my debian install but that part actually fails too saying "ALERT /dev/sda1 does not exist"
- When SATA mode was set to ATA, I tried to re-install the system but this time my drive was not recognized by the installer: "No common CD ROM drive"
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem? both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb. Jumpers are set to cable select. Boot order in bios is correct. (primary first, secondary isn't in the list at all)
I'm using Arch with the latest updates and I'm pretty sure this is a software problem.Basically about one out of five times my system freezes at "Grub Loading Stage 2". Whenever this happens, I usually just reset my box with the reset button and it will boot up just fine the next time.I originally put it down to being a defect in my hard drive which is probably three years old now at least. However, last week I bought a brand new 1.5TB drive. I removed my old drive and am using only my new one. Same problem.I Googled for this problem and found a bunch of posts with the same issue as I'm having, yet all of those issues are with people that dual boot with Windows. I don't. I only have Arch and no other OS on my system. I then tried reinstalling Grub and that doesn't seem to have solved it.I'm hoping someone can help me out with this. I hope it's not a hardware problem. Any help is VERY appreciated as this problem makes me worry that something worse is going on.
ok so i jut installed ubuntu from an old live cd, i had to upgrade it twice to get it currant, and i also have a win 7 os on my box. Now when I try to boot I only get as far as the grub loading screen where an error 17 pops up, google says thats because it can't boot the selected boot partition but i cant even select my windows partition. im on the old live disk right now.
Here's a screenshot of a sudo fdisk -l command [url]
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
After I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
Here's my problem, i have 1 Ubuntu cd, (8.10, free cd), 1x 9.10 32 bit from a friend, and a 64bit 9.10 from a friend. Also i have downloaded 9.10 64bit ISO, (making sure the md5 was correct)This is what ive tried: - Installing inside windows, cd - Installing inside windows, iso mounted - Installing via cd on boot - Installing via usb on boot- Booting from cd/usb, like testing, and install from that (but got to loading screen..)Ive tried the above with all the Ubuntu's mentioned.Yet all have got to the Loading screens and just stopped.With the USB one, once (it had casper on it?), it had errors such as IO, memory buffers etcSo why doesnt either 32 or 64 bit work on my system, is there something i missed?
I have a rig with 4 graphics cards. When I installed Ubuntu, only 3 of them got detected, the 4th did not.Now, I've fixed that problem. However, when booting up Ubuntu, it stays on the purple blank screen for a while, then goes frozen on the logo with 5 red dots.I've tried re-configuring xorg with the command line, however I had no luck
Background: I was attempting to install new Nvidia drivers. When they didn't work, I madly attempted to uninstall, reinstall, different drivers and configuration files following advice posted on forums. There were many, many installs and restarts during this process, causing a variety of problems and errors. Currently, I have purged all the nvidia drivers except the nvidia-current ones with the xorg.conf file generated by running nvidia-xconfig.
Current problems: Boot process gets to purple Ubuntu screen with 5 changing dots beneath, but hangs there forever. Pressing esc reveals that the boot process gets to "checking battery state [ok]", but fails to load the login screen. Pressing ctrl-alt F1 allows me to log-in and startx successfully starts Xorg with the proper Nvidia drivers.Question:How can I fix things so that the system does not hang at the Ubuntu loading screen? Or, how can I diagnose what is causing the error?I suspect there may be a problem with the xorg.conf file that's being generated by nvidia-xconfig. Please take a look:
Code: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22
Adding several 2TB HDDs somehow crashed SATA controller on motherboard.Fedora will no longer boot.
I connected HDD (with Fedora OS) to another computer.Fedora gets past GRUB, but hangs before loading the splash screen.Is something wrong with GRUB settings?Previously, I had dual boot at GRUB (Fedora and WindowsXP).
What is the easiest way to get Fedora to boot properly on another system?I need access to those files.
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I've been using wicd since starting out with 13.0 and it works flawlessly when using three different WPA wireless networks and a couple of wired networks. But, every time I get on a virgin train and try and connect to the internet via the open wireless network, wicd just hangs at the dhcp stage. If I stop wicd and edit rc.inet1.conf to contain this:
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
I have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading. error: no such partition grub rescue> _
Have I killed my computer or is there some way I can fix it?
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
I applied all updates to my Kubuntu 10.04 installation, and shutdown and went to bed. Booted up this morning and found: [code]...
This error is returned if the module load command is used before loading a Multiboot kernel. It only makes sense in this case anyway, as GRUB has no idea how to communicate the presence of location of such modules to a non-Multiboot-aware kernel. lets re-install GRUB. So I booted up my live CD, and ran:
Same error. So I started looking around, and most complaints of this particular error seem to be dual boot environments, which I found rather odd, as I have never dual booted this machine.....
I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?
