Fedora Installation :: 13 After Install Grub Not Loading?
Jun 13, 2010
I am trying to install fedora on my semi aging PC. It installed fine and prompted me to reboot. So I did, but then as soon as it tries to load the grub menu, it gives me the following error: no such device: 2cb414b7-7620-48a9-93af-f03aec3495e4How do I restore grub and make it work? Right now I am using the livecd to type this. I do not really need the grub loader since I am only running one OS, which is currently fedora. I recently had Ubuntu 10.04 which did not have grub (at least it is not shown during the boot) and suited me more than fine.
View 3 Replies
ADVERTISEMENT
Jan 8, 2010
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies
View Related
Jan 14, 2009
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Jan 26, 2010
I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
View 5 Replies
View Related
Dec 4, 2009
I have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said
splash=silent
and
quiet showopts
I was wondering what they meant?
View 2 Replies
View Related
Jun 13, 2010
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
View 9 Replies
View Related
Jan 29, 2010
I want to use my BootIt NG boot menu. How would I go about installing Debian 5.0.3 and prevent Grub from loading into MBR? I don't remember being asked by the installer where to put Grub. Unlike Fedora where you can choose MBR or boot section of the target partition. Debian 5.0.3 -
View 2 Replies
View Related
Oct 27, 2010
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
View 5 Replies
View Related
Jun 21, 2011
After I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
View 2 Replies
View Related
Jan 25, 2010
The follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies
View Related
Jan 30, 2010
I've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
View 9 Replies
View Related
Oct 17, 2010
I had dual boot (windows XP and 10.4). I upgraded to ubuntu 10.10. Post upgrade I got a grub rescue prompt.
After that I followed the grub recovery procedure.
[URL]
I did not get any errors during the procedure.
However post reboot I get nothing. just a black screen..not disc activity either.
View 4 Replies
View Related
Aug 1, 2011
I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)
When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?
Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).
View 2 Replies
View Related
Mar 27, 2010
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
View 9 Replies
View Related
Feb 15, 2010
I installed Windows XP and then Ubuntu on the remaining disk. However, each time I go back to windows, windows decides to destroy grub and it stops loading, then I have to use a rescue disk and do a grub-install again. It's annoying to have to do this everytime I go to windows. Is there a way to avoid windows to destroy grub? Or install grub on a place windows cannot touch?
View 4 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Aug 27, 2011
Anyway to fix this without reinstall entire FC15 again. I have Nvidia 6200 video card that was running kmod accelerator. I tried reinstalling grub and no change so far.
View 6 Replies
View Related
Jan 6, 2010
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
View 3 Replies
View Related
Feb 6, 2010
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies
View Related
Feb 7, 2009
I just started using linux (newb) on a dual boot with windows VISTA. I need to disable data prevention execution whenever I do boot Vista through GRUB but I don't know what command to use nor exactly where to put the command.On a single boot windows machine, all you would do is type the following at the command prompt and reboot: bcdedit.exe /set {current} nx AlwaysOffAlso, GRUB lists my VISTA boot option simply as "other." Is there a way to change that?
View 3 Replies
View Related
Sep 22, 2010
I upgraded to fc13 from fc12 recently. After the upgrade the virtual machine boot is stuck in grub loading stage 2. I have attached a screen shot of the picture for reference.
View 5 Replies
View Related
Jan 13, 2010
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
View 9 Replies
View Related
Mar 27, 2010
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
View 4 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Jan 31, 2010
Yesterday I partitioned my hard drive with kubuntu netbook remix and windows 7. after a few hours and reboots i turned on my computer and it said Grub loading. unknown filesystem rescue grub> It looks like allot of people have been having similar errors recently with windows 7.
View 3 Replies
View Related
