I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies View RelatedThe follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies View RelatedI've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
I had dual boot (windows XP and 10.4). I upgraded to ubuntu 10.10. Post upgrade I got a grub rescue prompt.
After that I followed the grub recovery procedure.
[URL]
I did not get any errors during the procedure.
However post reboot I get nothing. just a black screen..not disc activity either.
I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)
When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?
Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies View RelatedI want to use my BootIt NG boot menu. How would I go about installing Debian 5.0.3 and prevent Grub from loading into MBR? I don't remember being asked by the installer where to put Grub. Unlike Fedora where you can choose MBR or boot section of the target partition. Debian 5.0.3 -
View 2 Replies View RelatedI am trying to install fedora on my semi aging PC. It installed fine and prompted me to reboot. So I did, but then as soon as it tries to load the grub menu, it gives me the following error: no such device: 2cb414b7-7620-48a9-93af-f03aec3495e4How do I restore grub and make it work? Right now I am using the livecd to type this. I do not really need the grub loader since I am only running one OS, which is currently fedora. I recently had Ubuntu 10.04 which did not have grub (at least it is not shown during the boot) and suited me more than fine.
View 3 Replies View RelatedI installed Windows XP and then Ubuntu on the remaining disk. However, each time I go back to windows, windows decides to destroy grub and it stops loading, then I have to use a rescue disk and do a grub-install again. It's annoying to have to do this everytime I go to windows. Is there a way to avoid windows to destroy grub? Or install grub on a place windows cannot touch?
View 4 Replies View RelatedI have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies View RelatedI'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies View RelatedI just started using linux (newb) on a dual boot with windows VISTA. I need to disable data prevention execution whenever I do boot Vista through GRUB but I don't know what command to use nor exactly where to put the command.On a single boot windows machine, all you would do is type the following at the command prompt and reboot: bcdedit.exe /set {current} nx AlwaysOffAlso, GRUB lists my VISTA boot option simply as "other." Is there a way to change that?
View 3 Replies View RelatedI am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
Yesterday I partitioned my hard drive with kubuntu netbook remix and windows 7. after a few hours and reboots i turned on my computer and it said Grub loading. unknown filesystem rescue grub> It looks like allot of people have been having similar errors recently with windows 7.
View 3 Replies View RelatedMy Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies View RelatedSo I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
I know this is an issue that has been brought up before and the solution I found is to recover Grub through the live CD [URL] However, this problem has occurred multiple times for me now. First time I thought it was just a freak error but it's happened multiple times within a short period of time (couple times this week) so I just wanted to get input on what's causing this and how I can fix it permanently. I've recently installed Ubuntu and I'm dual booting Ubuntu 9.10/Windows 7 Ultimate 64bit.
View 9 Replies View RelatedI installed Ubuntu 11.04 (dual-boot with Win 7) and at first the bootloader was working fine; I even installed BURG (although I installed it on hd0 because I don't know how to find out where the MBR is installed...) but it worked fine when I restarted my computer several times. However, when I booted into Windows 7 and then restarted for the first time since installing BURG, I am stuck with the "GRUB loading" screen at startup, and can't get into any OS. I will try using the Live CD, but I'm wondering if the problem was because I installed BURG in the wrong drive? How do I figure out where the MBR is, and how do I fix this with the Live CD?
View 3 Replies View RelatedI have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
View 2 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
i reinstall it but just one of my ubuntu came.by the way i have 5 ubuntu 9.10 and 1 windows xp.how can i add my windows xp to grub loading?
View 2 Replies View RelatedI just upgraded to 10.04 from 9.10 and when I choose to boot to my Win7 Pro it just loops back to the grub menu. I did choose the partition that Windows is on when I was upgrading and it shows up in the menu.
View 3 Replies View RelatedI updated Ubuntu and part of it was an update to grub. When it came up in the installation I told it to keep the old one and left everything as it was. Then when I tried to reboot into Windows it gave an error message. So I went back into Ubuntu and reinstalled grub and now when I select Windows it just loops back to grub.
View 4 Replies View Related
