Ubuntu Installation :: 9.10 Installer Hangs At Loading?
Mar 29, 2010
trying to install ubuntu on a 2nd partition on a Dell D630. The OS currently on it is Windows 7 Enterprise. I've used Windows 7 to repartition and have 80GB available for the Ubuntu install but when I put the CD in to run it gets detected as a bootable CD and starts to boot but freezes after Loading...I've left it for 2 hrs and it never progressed past that screen. I've also downloaded and burnt the ISO three times (twice in the 64 bit version and once in the 32). In all cases the install never advances. I've also tried a USB install but couldn't get that to boot
The Ubuntu installer hangs on step 3 0f 6, the stage in which you select the keyboard layout. The computer it is being installed on is a Toshiba Satellite.disk had previously worked to install on a macbook for dualbooting.
I use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is: <<BLACK SCREEN>> Grub loading. <<BLACK SCREEN>> underscore Ubuntu logo ubuntu login
So I don't know whats wrong. Right now my disk looks like this: MyDisk > MyDisk1 ntfs ( For windows 7 ) MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
I can boot up 11.04 amd64 to an sd card, and in the early alphas I could install it fine. Older versions of ubuntu install fine (10.10), too.
But since about beta 1 or so of 11.04 (and with the final release), it boots up and I see the installer and it says, yes, you have enough disk space and so forth. But then I click the 'forward' button to proceed with the install and it just hangs with a spinning cursor.
Any one else have this problem or know a workaround/fix? Or know how I can turn on debug messages or so forth to see where exactly it is hanging?
I'm trying to install to an hp tm2t (no cd drive).
I am trying to install 9.1. On bootup the CD loads and gives me the options on Installation, Try Ub etc. However after I choose install the BW logo shows up but nothing happens after that.
Incidentally i have 2 of these machines with 9.1 and 10.04 installing fine in the other one. In this one the main difference is a newer DVD burner. The other one also has a DVD burner but older.
The DVD burner is about 7 months old - purchases earlier in the year.
So wondering if loading the driver is an issue? if so how does the CD load and even the logo loads after Install is selected?
Or is it a different issue and would there be different options to try when installing? I would rather not have to replace the DVD burner.
Just bought a new computer that I will use as server: Gigabyte 890GPA-UD3H motherboard AMD Phenon II 1090T 16 Gb RAM 4 x Seagate 2Tb hard disks
I tried to install Ubuntu server 10.04 and 10.10, both 64 bit, having similar results. Also I have tried enabling and disabling the RAID card. On 10.04 installer hangs preparing disk partitioning phase at 43%, on 10.10 hangs at the same stage 45%. Must I download something and apply before that phase?
I've just decided to downgrade from 64-bit to 32-bit Ubuntu. I created a live USB from the most recent (as of today) 11.04 download, booted up, and selected the option to replace Ubuntu. (Also on my HDD are a Windows partition and a shared partition for documents.)The installer hung at the timezone select page - and, foolishly, I hard-restarted the PC. I can get into 'try Ubuntu' without problems, but every time I try to actually install, it hangs. I can't boot into Windows, since GRUB seems to have been overwritten in my failed partial install. (I can get to a 'grub rescue' prompt, though.)
I suspected it might have something to do with my internet connection - I need to go through a university proxy script, so I'm not sure whether the installer will actually have internet access, even after I've been able to apply proxy settings while running Ubuntu from the USB.
I'm trying to install Wheezy (amd64) from the daily netinst image with the text-based installer. The PC will lock up randomly at some point in the process (usually after about 5-10 minutes). The video signal cuts out, keyboard lights are unresponsive, and I have to hard-reset the machine.I was previously trying to install Linux Mint Debian Edition and had the same problem. Another user reports that this is due to a bug in the nouveau nVidia driver, but I can't confirm it.URL...
I assume the Debian text installer isn't using nouveau, so it seems unlikely that would be the problem. The random timing does suggest an overheating problem, though, and the fact that the video signal drops out would seem to implicate the video card. I had no lockups at all with the OS that was previously installed (Ubuntu 11.04).
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
Here's my problem, i have 1 Ubuntu cd, (8.10, free cd), 1x 9.10 32 bit from a friend, and a 64bit 9.10 from a friend. Also i have downloaded 9.10 64bit ISO, (making sure the md5 was correct)This is what ive tried: - Installing inside windows, cd - Installing inside windows, iso mounted - Installing via cd on boot - Installing via usb on boot- Booting from cd/usb, like testing, and install from that (but got to loading screen..)Ive tried the above with all the Ubuntu's mentioned.Yet all have got to the Loading screens and just stopped.With the USB one, once (it had casper on it?), it had errors such as IO, memory buffers etcSo why doesnt either 32 or 64 bit work on my system, is there something i missed?
here are my specs...AMD Athlon xp 2200+,1.80 Ghz,736 mb of ram,10 gb hard disk&Nvidia GeForce2 Integrated GPU...actually it hangs up after loading that bar or sometimes before loading itselfshould i opt for older fedora if so which version i even tried fedora 11 kde but it hangs after booting up
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
I am trying a new install of opensuse 11.2 64 on my computer. I have tried all the F key options at the bottom of the installation screen but when loading the installation hangs at "Loading basic drivers..."I get the same issue with the 32 bit version of 11.2 and the 64 bit version of 11.1.The 32bit of 11.1 proceeds to install only to crash out with error 3030 when it tries to format an lvm parition.
I just installed a .deb package using the Package Installer in Ubuntu. After closing the dialog that told me it finished installing, the "Package Installer" window was left grayed out and impossible to close (the 'x' button does nothing). How can I terminate this program? Why does Ubuntu not have a way to end processes that don't respond to input?
It does not seem to be listed in the system monitor.
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
I am trying to prevent the dm_mod and friends from loading during install.I am installing by PXE boot with NFS and kickstart files over http. This works fine for other machines.Ok, I have a Dell PowerEdge 2900 III with 8gig ram, PERC 6/i raid controller.The raid has 8 1TB drives in it, so the total size of the device is >2TB.There is also an SATA drive, which is NOT on the raid controller.
The problem is, I want to install CentOS on the SATA drive. The SATA drive comes up as a device-mapper drive, with a big crazy device name.This is ok, but the problem is, when the system goes to boot, it just says 'missing operating system'.I can't boot from the raid because it is large enough to require a GPT partition, and CentOS says it can't boot from a GPT partition.The SATA drive would work FINE if I could just prevent the damn device mapper from loading, so that I could install on the SATA drive in ordinary SATA mode.
I have tried re-squashing the stage2.img with /etc/modprobe.conf with alias dm_mod off and such, no luck.I also tried adding an /etc/modprobe.d/blacklist file, that did not work either.I also tried putting blacklist= dm_mod in the kickstart file, but that seems to be a fedora-only option and it kills my install. any ideas on preventing the dm_mod et. al. from loading at install time??
After I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
i am having old hardware..here the specs..AMD Athlon XP 2200+1.80 Ghz,736 MB of ram,10 GB hard disk and Nvidia GeForce2 Integrated GPU i tried to use live cd it hangs after loading bar or at some times before itselfi even tried to use fedora 11 kde live but it hangs after booting up
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
I have a rig with 4 graphics cards. When I installed Ubuntu, only 3 of them got detected, the 4th did not.Now, I've fixed that problem. However, when booting up Ubuntu, it stays on the purple blank screen for a while, then goes frozen on the logo with 5 red dots.I've tried re-configuring xorg with the command line, however I had no luck
Background: I was attempting to install new Nvidia drivers. When they didn't work, I madly attempted to uninstall, reinstall, different drivers and configuration files following advice posted on forums. There were many, many installs and restarts during this process, causing a variety of problems and errors. Currently, I have purged all the nvidia drivers except the nvidia-current ones with the xorg.conf file generated by running nvidia-xconfig.
Current problems: Boot process gets to purple Ubuntu screen with 5 changing dots beneath, but hangs there forever. Pressing esc reveals that the boot process gets to "checking battery state [ok]", but fails to load the login screen. Pressing ctrl-alt F1 allows me to log-in and startx successfully starts Xorg with the proper Nvidia drivers.Question:How can I fix things so that the system does not hang at the Ubuntu loading screen? Or, how can I diagnose what is causing the error?I suspect there may be a problem with the xorg.conf file that's being generated by nvidia-xconfig. Please take a look:
Code: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22
I got a new ASUS EeePC 1015PEM with Windows 7 with the intention to install OpenSuse 11.3 onto it for having a dual booting netbook with enough disk space.I'm installing from an external DVD drive, the checksums of the ISO were ok as well.However, the OpenSuse installer fails at starting up after selecting the action. It hangs, no matter what menu entry I chose, at "loading basic drivers", forever.Because this isn't necessarily an unknown problem I've tried some of the predefined kernel options of the main installer menu. Then I tried some manually entered kernel boot options that helped me in some other installations:
acpi=off, apm=off, CPUFreq=noNone of them seem to have an effect on the installers behaviorI hope that there is people who managed to solve this problem with an actual EeePC model... because I really don't know what I could any more. It's kind of frustrating to not even get past the kernel launch I haven't tried any other distros installation discs, but I don't even intend to. I want OpenSuse because I'm running it on our firms machines as well and don't like shifting between systems.
I am having difficulty loading fedora 14 with nvidia 7300gt. I have lots of text on the screen but I cannot enter anything then system hangs there only. The same system runs fine with windows XP The same system runs fine when I use onboard graphic card and disable nvidia. I installed the fedora 14 by disabling nvidia graphic card and used onboard grphic card. I had exactly the same problem with ubuntu, I was not even able to boot from live cd with nvidia. Now I want to use my nvidia graphic card for fedora.
Adding several 2TB HDDs somehow crashed SATA controller on motherboard.Fedora will no longer boot.
I connected HDD (with Fedora OS) to another computer.Fedora gets past GRUB, but hangs before loading the splash screen.Is something wrong with GRUB settings?Previously, I had dual boot at GRUB (Fedora and WindowsXP).
What is the easiest way to get Fedora to boot properly on another system?I need access to those files.
I was trying to install openSUSE 11.2 on Dell XPS Studio, model PP35L, but loading kernel hangs at 94%, I tried F5 for Safe Settings, No APIC, No Local ACPI, Check Installation Media, but it still hangs at 94%. Installation works fine on older computer. Is it because openSuse kernel doesn't recognize the i5 Core processor yet? If this is caused by a driver, is there a way to display the kernel messages and what would be the kernel boot options to disable loading of that driver?
I am trying to install opensuse 11.3 but the PC restarts itself before loading the installer dvd. When I run the installer dvd from 11.2 i can see all the files there, i click on auto run and it gives me an error msg saying cannot find autorun program also have a live gnome desktop cd and same problem, cant boot install media. This were both created on opensuse 11.2 using k3b for the first one and brasero for the second one. I have put both on an xp laptop and the installers start with no problem, both media check are fine, no error. On top of that I have some ubuntu dvd and some xp dvd, I have tried both on my pc and they boot fine, so its not a boot problem,
this ones were created on this same pc before I had opensuse, seems only cd or dvd created in opensuse fail, but it only fails when booting on my opensuse pc and work fine when I put them into xp laptop. I have been trying all day and I cant find any info on this problem. The only thing I can think of, that I have not tried is to try to burn a dvd using xp and try that one.
I just installed Ubuntu Lucid yesterday, and I'm dual-booting with Windows 7. (They're on separate physical drives if that's relevant.) I've discovered that whenever I restart the computer, it doesn't matter if it's from Windows or Ubuntu or just hitting the reset button, it hangs at "Loading Operating System." If I start it cold, though, it usually works fine. I tried Googling but I couldn't seem to find anybody else with this problem. I'm guessing it's a GRUB problem? Does anybody know how to fix it?
