here are my specs...AMD Athlon xp 2200+,1.80 Ghz,736 mb of ram,10 gb hard disk&Nvidia GeForce2 Integrated GPU...actually it hangs up after loading that bar or sometimes before loading itselfshould i opt for older fedora if so which version i even tried fedora 11 kde but it hangs after booting up
View 1 Repliesi am having old hardware..here the specs..AMD Athlon XP 2200+1.80 Ghz,736 MB of ram,10 GB hard disk and
Nvidia GeForce2 Integrated GPU i tried to use live cd it hangs after loading bar or at some times before itselfi even tried to use fedora 11 kde live but it hangs after booting up
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies View RelatedI currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies View RelatedI was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
Im trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
View 1 Replies View RelatedI've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
Here's my problem, i have 1 Ubuntu cd, (8.10, free cd), 1x 9.10 32 bit from a friend, and a 64bit 9.10 from a friend. Also i have downloaded 9.10 64bit ISO, (making sure the md5 was correct)This is what ive tried: - Installing inside windows, cd - Installing inside windows, iso mounted - Installing via cd on boot - Installing via usb on boot- Booting from cd/usb, like testing, and install from that (but got to loading screen..)Ive tried the above with all the Ubuntu's mentioned.Yet all have got to the Loading screens and just stopped.With the USB one, once (it had casper on it?), it had errors such as IO, memory buffers etcSo why doesnt either 32 or 64 bit work on my system, is there something i missed?
View 4 Replies View Relatedtrying to install ubuntu on a 2nd partition on a Dell D630. The OS currently on it is Windows 7 Enterprise. I've used Windows 7 to repartition and have 80GB available for the Ubuntu install but when I put the CD in to run it gets detected as a bootable CD and starts to boot but freezes after Loading...I've left it for 2 hrs and it never progressed past that screen. I've also downloaded and burnt the ISO three times (twice in the 64 bit version and once in the 32). In all cases the install never advances. I've also tried a USB install but couldn't get that to boot
View 5 Replies View RelatedAfter I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
View 2 Replies View RelatedI was trying to do a fresh install of Fedora 13 using a live CD on my 7-year old laptop. However, the installation failed during creation of home folder, citing some disk issue.Now, when I try to reboot my comp with the live CD, the boot screen hangs at the "f" graphic. What could be wrong? Is there anything I can do to reboot with the live CD and also install Fedora 13?Also, is there a way to fix corrupt disk sectors or skip them during installation?
View 2 Replies View RelatedI am having difficulty loading fedora 14 with nvidia 7300gt. I have lots of text on the screen but I cannot enter anything then system hangs there only. The same system runs fine with windows XP The same system runs fine when I use onboard graphic card and disable nvidia. I installed the fedora 14 by disabling nvidia graphic card and used onboard grphic card. I had exactly the same problem with ubuntu, I was not even able to boot from live cd with nvidia. Now I want to use my nvidia graphic card for fedora.
View 9 Replies View RelatedI had to reinstall Windows 7 on my machine (go figure) and I am trying to restore GRUB so I can use Ubuntu again, but I can't seem to do it with my 10.04 Lucid Live CD...which I can actually get to work with "nomodeset" on my Nvidia card (GeForce 6150 LE). However, I try to use my 10.10 Live CD, and even with "nomodeset" I get nowhere. If I hit the ESC key, I can read "stdin error 0" or something along those lines, then it shows many repeating messages with "logical blocks"...
View 1 Replies View RelatedAdding several 2TB HDDs somehow crashed SATA controller on motherboard.Fedora will no longer boot.
I connected HDD (with Fedora OS) to another computer.Fedora gets past GRUB, but hangs before loading the splash screen.Is something wrong with GRUB settings?Previously, I had dual boot at GRUB (Fedora and WindowsXP).
What is the easiest way to get Fedora to boot properly on another system?I need access to those files.
Ubuntu-live-usb hangs And the only thing I see are Ubuntu and dots changing colours from orange to with. How may I see boot post and see where the problem are? I have check the disks by hold down -shift.
View 2 Replies View Relatedive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies View RelatedUsing a multitude of different programs, including the one the official site recommended, it always hangs at this screen with a blinking cursor:
Code:
SYSLINUX 4.02 2010-07-21 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
how do I get past this? What's going wrong here? I checked the md5sum of the iso and it matches up with the official one.
Edit: I know the flash drive isn't at fault, because I've used it as a live USB for 10.04 and several other distros.
I have a Dell Dimension 2400 I got at a yard sale. Has the typical 512MB Ram, 80GB Hard Drive, 2.4GHz Celeron and the integrated Intel video and audio. I decided to put Ubuntu 9.10. However I got a Kernal Panic while loading the live CD. It gets to the white flashing Ubuntu Loco. It freezes. The lights on the keyboard flash and it complains of a kernel panic.
View 5 Replies View RelatedMy live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies View RelatedI get the newest fedora 13 dvd install & the live cd. Put on the disk and try to install. But the installer hangs on random times, so i cant install the system. Sometimes hangs on the anaconda start, others in the partition tables, others in the language section.
i try to run the live cd and install from there. Ok the first time the cd boot very nice . But when i try to install , the pc hangs again. Other times the boot from live even finish, when the last percents r coming, hangs again.
I all hangs, the dvd drive stop's and never return. So the Fan of cpu start to run very quickly and stay there forever until my patience permits.
So i use the ubuntu installer ( almost 4 years with u fedora, and need ubuntu installer!?shame on u) and search some information about the case. Yes, the last ubuntu boot,install, and run out of the box very quickly!
I see others with Dell & others brands still have problems with hangs and freezing , in boot and installs, so the first thing i search was the kernel parameters and try to use some flags.
I think the source of this kind of problem is the acpi . When i check the flag pci=noacpi or acpi=off , i have see that on the pre-anaconda start, when u choose the english language in text mode, clicking next the installer cant anymore find the media DVD, and the hard disk with the partition table. Sometimes the installer brings me the option to search in the ubuntu partitions, sometimes no.
How to debug and search the source of the problem? Any way? code...
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
I am trying a new install of opensuse 11.2 64 on my computer. I have tried all the F key options at the bottom of the installation screen but when loading the installation hangs at "Loading basic drivers..."I get the same issue with the 32 bit version of 11.2 and the 64 bit version of 11.1.The 32bit of 11.1 proceeds to install only to crash out with error 3030 when it tries to format an lvm parition.
View 9 Replies View RelatedI got a new ASUS EeePC 1015PEM with Windows 7 with the intention to install OpenSuse 11.3 onto it for having a dual booting netbook with enough disk space.I'm installing from an external DVD drive, the checksums of the ISO were ok as well.However, the OpenSuse installer fails at starting up after selecting the action. It hangs, no matter what menu entry I chose, at "loading basic drivers", forever.Because this isn't necessarily an unknown problem I've tried some of the predefined kernel options of the main installer menu. Then I tried some manually entered kernel boot options that helped me in some other installations:
acpi=off, apm=off, CPUFreq=noNone of them seem to have an effect on the installers behaviorI hope that there is people who managed to solve this problem with an actual EeePC model... because I really don't know what I could any more. It's kind of frustrating to not even get past the kernel launch I haven't tried any other distros installation discs, but I don't even intend to. I want OpenSuse because I'm running it on our firms machines as well and don't like shifting between systems.
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
View 1 Replies View RelatedI have a rig with 4 graphics cards. When I installed Ubuntu, only 3 of them got detected, the 4th did not.Now, I've fixed that problem. However, when booting up Ubuntu, it stays on the purple blank screen for a while, then goes frozen on the logo with 5 red dots.I've tried re-configuring xorg with the command line, however I had no luck
View 4 Replies View RelatedI was trying to install openSUSE 11.2 on Dell XPS Studio, model PP35L, but loading kernel hangs at 94%, I tried F5 for Safe Settings, No APIC, No Local ACPI, Check Installation Media, but it still hangs at 94%. Installation works fine on older computer. Is it because openSuse kernel doesn't recognize the i5 Core processor yet? If this is caused by a driver, is there a way to display the kernel messages and what would be the kernel boot options to disable loading of that driver?
View 2 Replies View RelatedBackground: I was attempting to install new Nvidia drivers. When they didn't work, I madly attempted to uninstall, reinstall, different drivers and configuration files following advice posted on forums. There were many, many installs and restarts during this process, causing a variety of problems and errors. Currently, I have purged all the nvidia drivers except the nvidia-current ones with the xorg.conf file generated by running nvidia-xconfig.
Current problems: Boot process gets to purple Ubuntu screen with 5 changing dots beneath, but hangs there forever. Pressing esc reveals that the boot process gets to "checking battery state [ok]", but fails to load the login screen. Pressing ctrl-alt F1 allows me to log-in and startx successfully starts Xorg with the proper Nvidia drivers.Question:How can I fix things so that the system does not hang at the Ubuntu loading screen? Or, how can I diagnose what is causing the error?I suspect there may be a problem with the xorg.conf file that's being generated by nvidia-xconfig. Please take a look:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22
[code]...