Fedora Hardware :: Parallel Printer CUPS Fedora 15 HP Doesn't Install Driver
Jun 3, 2011
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies
ADVERTISEMENT
Apr 28, 2011
I have taken a break from using Fedora, but since getting my netbook Ive decided to dual boot with Windows 7 Started (warranty purposes) and Fedora 14 with Fedora as the default boot OS. Now Ive got my home network setup as follows:
Gaming laptop, Windows 7 Pro x64, external powered USB hub with 1.5TB HD with shared folders through windows share permissions and the HP Deskjet F2430 printer
Netbook 1, my wifes netbook, Windows 7 Starter, has 100% access to the windows shares and the printer.
Netbook 2, my netbook, Fedora 14 has windows shared folder access but no printer access. In Windows 7 Starter has access to windows shared folders and printer access.
All of them are wirelessly networked through my Linksys WRTG54GS thats flashed with DD-WRT Mega firmware. The only laptop that has a hardwired connection to the printer and HD is my gaming laptop. how to go about allowing this? My printer doesnt show up in the CUPS wizard.
View 14 Replies
View Related
Nov 19, 2010
It's some years since I last used Fedora. I'm looking at Fedora 14 KDE spin and trying to figure out how to install my old HP Laserjet parallel port printer. In the printer configuration utility I can only find options for network printers. I can't find any option to add a local printer.
View 2 Replies
View Related
May 16, 2010
After struggling with a bad LP cable I have finally proven that the cable, printer and port all work. I booted in to another OS and was able to finally print. Now, I'm trying to get server 10.4 to recognize the printer and then I want to configure CUPs so I can run this machine as a headless print server, among other things.
Apache is running as I managed to get nagios to run and I can pull it up from another PC via a browser.
sshd is running as I'm logged in from another PC via ssh.
Problem number 1 is how do I install a driver for an NEC Superscript 870 printer? As it is lpstat returnes with :
karl@zeus:/etc/cups$ lpstat -t
scheduler is not running
no system default destination
Once I am able to print then I need to print to the server from other hosts on the network.
View 9 Replies
View Related
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
View Related
Apr 18, 2011
When I boot fc14 with an already defined printer connected on the parallel port, then I can use the printer. The printer appears on parallel:/dev/lp0. But, if the printer is not connected during startup, when I connect the printer I cannot use it. Nothing happens. I have no corresponding message using "dmesg" command when I connect the printer.
I cannot make cups see that the printer is connected, using "localhost:631" in firefox. Is it possible to "mount" the printer manually? Using "system-config-printer", the printer has to be "activated", even though it is not used or even connected. Then "parport" module is installed during boot (with other related modules: "ppdev" and "parport_pc").
Then, when the printer is connected, "dmesg" shows :
lp0: using parport0 (interrupt-driven).
lp0: console ready
And, of course, it is now OK to use the printer.
View 1 Replies
View Related
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
View Related
May 14, 2010
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Jan 19, 2010
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
View 3 Replies
View Related
Jul 21, 2010
i'm using a Lexmark Pro 905 printer , it's a local printer with Ethernet connection to the pc.I installed the driver and this used to work on 11.2, now with openSUSE 11.3 it's not working. THe yast test page comes out but nothing is printed from open office.I opened port 661 UDP in the firewall but still no result comes from open office.I then added the printer in cups but i still have an error and no print : ( cups-1.4.4-2.3.i586 )
Lexmark_Network_Backend_1
Lexmark Pro800-Pro900 Series
Local Printer Lexmark Pro800-Pro900 Series, 1.0
[code]....
View 9 Replies
View Related
Jan 10, 2011
Ok have setup my printer under suse 11.3 just fine and printing perfectly, and have added the printer to a windows 7 client, but had to get the disk to install the windows driver. Is there any way that i can put the windows driver on the linux machine so that when i go to a windows client and want to add the printer, i can just connect to the printer and the windows driver will be installed over the network like it does with windows servers?
View 4 Replies
View Related
May 12, 2009
I'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem
Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..."
On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
View 3 Replies
View Related
Feb 4, 2010
I wish to update the drivers for a printer which is being shared using samba - can I just upload the new drivers and overwrite the old or do I need to delete the old drivers before uploading the new ones
View 3 Replies
View Related
Jun 20, 2009
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
View 6 Replies
View Related
Jun 17, 2009
I'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
View 4 Replies
View Related
Mar 18, 2010
I have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
View 2 Replies
View Related
Sep 18, 2010
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
View 2 Replies
View Related
Mar 13, 2011
After a fresh install of suse 11.4, Yast cannot configure my local printer (Epson Epl-5700) because there is no parallel port available. How can I make parallel ports work?
View 5 Replies
View Related
Feb 27, 2010
I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
View 7 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. This generates a "Linux Printer Package Setup" pop-up screen.The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Jan 18, 2010
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
View 14 Replies
View Related
Apr 27, 2010
I have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?
View 2 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Jul 18, 2009
I have installed fedora7 with dell desktop pc. I conected (usb port)HP LaserJet1018 printer. but i didnt get the same hp Laserjet1018 driver.
View 2 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Sep 15, 2009
Anyone know where I can get a driver for that printer? I checked HP website and they don't make a driver for Fedora -- only MS-Windows and MAC. So how do I send something to that printer which is connected via USB cabel ?
View 3 Replies
View Related
May 29, 2010
Which printer's have the best driver support on FC12
View 7 Replies
View Related
Jan 26, 2010
if there is a printer driver that will drive a Lexmark c540n laser printer? I have had a look on the Lexmark web site and could find no drivers for Fedora. Would a driver for, say, Red Hat function with this printer?
View 2 Replies
View Related
