Fedora :: 13 - Support For HP Laserjet P2035
Jul 26, 2010
Under Fedora 12, the HP laserjet p2035 is supported. It appears under HP>Laserjet as a dirver option when setting up the printer. But all the HP driver options except two havedisiappeared under Fedora 13 (64 bit version).
I may be missing some package, but if so I don't know what. I didn't have to do anything special, I think, for Fedora 12.
Also, I can't set up the printer as a windows printer. I don't know if it is because none of the driver options work or because of something else. I often have problems setting up remote printing with a new release, so I expected this. But I'm not sure where to begin troubleshooting.
View 10 Replies
ADVERTISEMENT
Nov 13, 2009
I've searched these forums high and low, but I can't seem to find a way to fix it. I had a similar problem in F10, but that was fixed. The problem I'm having now is a little bit different. If I open the print que before I print something like a test page, and then start printing, an item with appear in the que for a second then disappears, and the printer will do nothing. I've run out of ideas on how to get it to work, I did try to apply the original fix for my first problem since it seemed that the drivers for the Printer that were available via HP weren't quite right, but that didn't work. I tried to run -c 'yum install foo2zjs' and that didn't do anything either.
View 2 Replies
View Related
Sep 6, 2010
I have a hp officejet on my fedora 13 pc. I tried to configure it as a network printer. I disabled selinux and then i opend the door in the firewall.. the printer is seen in the network but when I try to print from a client it says "printer description not available" . I disabled then firewall both on server and on client. then rebooted both. but no luck. the printer is available on the network but it prints only from the server.
View 2 Replies
View Related
Apr 23, 2011
I am running F15 Beta i686 (Gnome3) Desktop on a dual-core, 4 Mb DDR2 system. I already installed hplip and hpijs drivers and connected HP LaserJet 5MP printer to the parallel port of my PC. Set up was by running "system-config-printer", adding device URI=parallel:/dev/lp0, and selecting approriate driver (CUPS+Gutenprint (en) for the printer. However, when I chose to print a test page, nothing came out and the printer window says the printer is not connected. This is even though I can print from Fedora14 installed on the same PC.
View 2 Replies
View Related
Jun 3, 2011
I am having problem printing some urgent documents. My fc14 machine cannot seem to see the printer. I remember on an earlier version it was a breeze ...I connected the printer and immediately the machine recognized it.I spent 2 hours trying to install hplip-gui.i686 0:3.11.5-1.fc14 successfully but yet the machine cannot see the printer.---------- Post added 3rd June 2011 at 08:16 AM ---------- Previous post was 2nd June 2011 at 11:59 PM ----------
View 8 Replies
View Related
Feb 13, 2009
I tried to install HP laserjet P1007 printer in my fedora 8 desktop. I followed these instructions:
yum -y install gcc*
wget -O foo2zjs.tar.gz [URL]
tar zxvf foo2zjs.tar.gz
cd foo2zjs
[root@arnab~]# make
[root@arnab~]# make install
[root@arnab~]# make install-hotplug
$ ./getweb 1005
$ ./getweb 1006
$ ./getweb 1007
$ ./getweb 1008
system-config-printer
Then I found the printer and add it. But the problem is when I tried to try to print a test page, it shows "job1 submitted".....that's all. No page gets printed. If I try once more, it shows "job2 submitted" but again no results. I cant also see all the submitted jobs.
View 2 Replies
View Related
Sep 7, 2010
I have installed fedora 12 in my system. And I want to install hp laserjet 1015 printer in my system. or want to share the printer to give the all access printer permission.
View 2 Replies
View Related
May 29, 2011
i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies
View Related
May 24, 2011
i used ubuntu maybe for a year but i dislike unity and i installed gnome 3 via ppa but it wasn't so stable.now i installed fedora on my netbook and really like!Gnome 3 is very stable but i have a problem with my printer.Fedora notices it plugged in my printer HP Laserjet p1005 but it doesn't find any drivers.
View 1 Replies
View Related
Sep 9, 2011
I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 Replies
View Related
Aug 23, 2011
I use a network printer (HP Laserjet 1300n). Since a few days ago I couldn't print anything, the error message is 'Unable to write print data:Broken pipe'. What could be wrong? I replaced the cartridge recently, but nothing else.
View 11 Replies
View Related
Aug 5, 2011
Who know how confiure a HP LaserJet P1102w on bebian 6?
View 3 Replies
View Related
Aug 31, 2010
how can i setup the HP Laserjet P1005 on slackware 13.1 ?
View 5 Replies
View Related
Jul 7, 2010
Is anyone else having problems with HP LaserJets and Ubuntu 10.04? I have a HP LaserJet 3015 and am running a dual boot with Windows 7.
Printer is automatically detected and works fine on: Windows 7, Windows XP, LinuxMint, and older versions of Ubuntu.
But when I'm running Ubuntu 10.04, when I try to print it just adds the job to the print queue and it never prints. After awhile I get a message saying that Ubuntu is unable to communicate with my printer. (or something to that effect). I can't even print a test page.
I have tried installing HPLIP following the directions given, but get the same behavior (can't communicate with the printer). I have tried unplugging the power cord and usb cable and plugging them back in (as per the directions I am following). But still not communicating.
View 7 Replies
View Related
Jul 10, 2011
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies
View Related
Apr 14, 2010
I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies
View Related
Jun 22, 2010
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
View 14 Replies
View Related
Feb 2, 2010
I have tried to download the latest version of CUPS but do not know how to install it properly using command line commands above 'sudo' and 'sh', and I have tried to install HPLIP but it needs 'cups-devel' installed apparently. My Debian can see the 1020 clearly enough to identify it and give its status as idle, via the CUPS interface. When I try and print a Test page it goes to the spooler, says it is printing OK, but nothing prints. The job then disappears and appears on CUPS as completed. In the old days we would have sent a eof() to make the printer work. Have I got a bug in my HP Laserjet 1020 driver? Or am I missing the great plug-in that is not on the Synaptic Package Manager The SPM says I have HPLIP installed.
View 5 Replies
View Related
Aug 17, 2010
I'm converting my coworker to Linux (who loves it) and I've gotten everything working but this %$#@ printer! I've tried the various solutions posted on these forums (over the past 4 or 5 years). But none of them seem to work.Has anyone solved this problem with Lucid (10.04)? Are there some new steps that pertain to 10.04?
View 2 Replies
View Related
Oct 21, 2010
I have been given a HP laserjet 1320 printer. how to make it work?
View 9 Replies
View Related
Dec 9, 2010
I've just received my hp laserjet pro m1212nf printer / fax /scanner device. It's installed as a Ethernet printer. First I had troubles with the printer. I could solve it by running
Code:
$ sudo hp-plugin
and then reinstalling the printer from the HP Device manager utility.
During the installation the tool also told me:
Code:
Unable to locate the HPLIP Fax PPD file:
HP-Fax3-hpcups.ppd.gz
Fax setup has been disabled.
[Code]...
View 9 Replies
View Related
Mar 15, 2011
I'm trying to connect Ubuntu (wubi installation on Windows) to an HP LaserJet 2100M printer via a USB cable which worked on Vista (I'm migrating away from Vista into Ubuntu).
System > Administration > Printing..I could not see or add any printer.
I searched around and followed these instructions ..
How to Install HP Printer Driver onto Ubuntu 10.10
[url]
I downloaded hplip-3.11.1.run but in following installation instructions I think I may have needlessly removed a previously installed hplip driver ..3.10.6 .. and various dependencies were loaded with these errors ..
Now when I go to System > Administration > Printing
In troubleshooting there is no connection to CUPS server. The "Add" button is no longer green as before I started dabbling. No discovered printers.
How do I start again to get HP LaserJet 2100M connected (USB cable) .. and printing?
View 1 Replies
View Related
Mar 25, 2010
Where can I find driver and install it on backtrac4 for hp laserjet 6l and scenjet 2400?
View 1 Replies
View Related
Jul 2, 2010
I have a hp p1102w laserjet printer that works in windows. However after connecting it through Suse Linux 11.2 it is recognized and the printer name is showing but there is no driver for the printer. This is a usb connection. I have an 1100a laserjet connected that works but it is a parallel port.
Any suggestions? I haven't been able to find any special drivers on the web.
jim
View 3 Replies
View Related
Nov 2, 2009
Inherited an old Laserjet 6P that was working fine XP. No matter which printer driver I use all I get are pages and pages of garbage during the test print. I have tried the hplip, gimp, ljet4 drivers without success. I have tried sending text files from the command line as well (cat /etc/passwd > /dev/lp0) with the same result.
Fedora 11 64
cups 1.4
hplip-3.9
hpijs-3.9
Anyone using this printer with cups 1.4? Any ideas which driver to use?
View 4 Replies
View Related
Jun 21, 2011
how to install my hp laserjet 1010 printer on red hat el5.when i connect my printer, a new window pops up detecting a new hardware but my printer's name or the driver is not listed. i have the printer's driver cd which is for windows.
View 7 Replies
View Related
Dec 4, 2010
My HP Laserjet P1007 is not working with BOSS GNU
View 1 Replies
View Related
Aug 25, 2010
I just installed CentOS on my Compaq desktop pc with HP laserjet 2100 printer on parallel port.However it takes an extremely long time to print.
View 3 Replies
View Related
Oct 30, 2010
I'm having trouble getting this printer to print. It'll scan fine, but it won't print. I keep getting the following error:
the printer's state message is: '/usr/lib/cups/filter/foomatic-rip failed'
I have searched and searched and tried numerous things, but I just can't get it to print. (I tried to post the debugging output here, but the forum kept wiping out my post).
View 3 Replies
View Related
Aug 26, 2009
I can't make work my HP LaserJet P1006 printer on USB with OpenSUSE.
It's being detected as usb://HP/LaserJet P1006 but there is no specific driver for it. I try to use the generic HP LaserJet driver but didn't work. There is no driver for P1005 model, either.
Someone had the same problem here: Cups Printer Driver Incompatibility Hp Laserjet P1006 Printer
View 9 Replies
View Related
