Debian :: CUPS Stopped Working With HP LaserJet 4 Plus
Jun 22, 2010
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
My printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code: D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
At work I've got a HP LaserJet P1505n printer that is used as network printer. It has an ethernet port and is plugged in directly into the network. Everybody in the office is using Windows and has no problems working with it. After a few hours of google-ing, I also managed to set it up with CUPS as a LPD printer, with some problems: every time I send a document to it, it goes into the "error" state, and I have to press the "green" button for the printer to start printing. Is there a way to work around these errors? I tried to google for these kind of errors, but couldn't find anything useful.
I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
I've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused
I am trying to set up a print server here on a Squeeze system using the stock debian CUPS package. It seems that since Apple has bought this package, it has caused me nothing but grief. I have set up two different USB printers with raw print queues, and every time I send a print job to either of them, the job disappears into thin air, with no error output. In fact, when I look at the queue, it says the job was completed successfully. I look at the logs, and there is no output indicating any issues. Just for kicks, I reconfigured one of the printers to use a linux driver, and it printed just fine (a little slow, but fine). I set it back to raw, and the jobs disappear again into oblivion.
I have done this many times in the past, and never had any issues -- I even had this very same printer set up that way about a year ago, and it worked great. The only noteworthy thing that seems to have changed is that there are no longer any files called "mime.types" and "mime.convs". It seems they have been replaced by "raw.types" and "raw.convs". The contents of these two files are as follows:
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting! cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I just got a new pc after my two pc's decided to die. I have had them for many years, maybe around 2001. So, I am new to this 64 bit OS. I'm running squeeze amd64. I am having some troubles with flash in Iceweasel. It just stopped working one day. So, I downloaded Firefox to see if flash would work in it. Here's the interesting thing. Iceweasel will play flash. I will close the browser and reopen to discover it no longer wants to play flash. I'll open Firefox, then close it. I'll then open Iceweasel and Flash will work in Iceweasel again.
This happens often. To get Flash to work, I just close Iceweasel, open Firefox, close Firefox, open Iceweasel and go to a flash site and all is good. Is there something I can do to get Flash to always work without opening Firefox?
ethernet suddenly stopped working and can't get it back, says something about device not active but it works well with the Debian live dvd, what could be the problem?I'm using mobile internet now and this seems to have happened after setting up the mobile connection but I dont think it as anything to do with the wired problem.
So everything was working perfectly on my system. I have Debian SID, with the debian-multimedia repos and liquorix repos for kernels. Flash worked perfectly one boot, then the next boot the video still works perfectly but no audio. I found several "fixes" on the web, including creating .asoundrc in your home directory and another that said to Quote:edit /etc/firefox/firefoxrc -- change the line FIREFOX_DSP="none" to FIREFOX_DSP="aoss"neither of those have done anything. Have tried using both the flashplugin-nonfree and flashplayer-mozilla, same thing on either. ALL other sound works, smplayer, amarok, system sounds, etc.
I successfully installed cups on my fedorabox, I can manage it through the web interface on port 631. I added the hplip and installed a HP Deskjet printer. However, when I want to print a test page I get the following error: "no pages found". The print job is in a stopped state...
Trying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot Got: CUPS Service Stopped The CUPS printer spooler does not appear to be running. To correct this choose system -> Administration -> Services There is not "Services there" What to do? Ubuntu 10.04 LTS
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake Supports Wake-on: g Wake-on: g
I use scim to input Chinese in Libreoffice-writer. It worked on one of my computers until a couple of days ago.
Normally to start scim I press Ctrl and the space bar at the same time. Then I use the input method Cangjie to input Chinese.
Now when I do so in Libreoffice-writer "English/European" appears in the scim panel. The other choice is "English/Keyboard". The choice of either doesn't enable me to input Chinese.
In all other software scim works as before.
The computer runs Debian sid. On another computer that runs Debian sid too I don't have the same problem. I have version 5 of Libreoffice on both computers.
My Iceweasel is not consistently opening pages. This is new behavior after changing the /etc/network/interfaces file for setting up bridging. The home page is advanced google search. When Iceweasel opens to google, I get a message saying the site is not secure and won't open it. Inputting [URL] ...., it takes about 90 seconds before it opens the site then freezes. If I go to forums.debian.net, the site is fully navigable, if I put anything in the Iceweasel search bar, it freezes.
For some reason my bash autocomplete stopped working. I get the error when I try to cd into a directory, pressing <tab> for autocomplete: cd A-sh: <( compgen -d -- 'A' ): No such file or directory Autocomplete works for the root user and for the other user on the machine, just not logged in as this user. The .bashrc file looks fine to me, and I didn't make any changes to it to even cause the bash autocomplete to stop working (as far as I know).
# enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ]; then . /etc/bash_completion fi What else could cause autcomplete to stop working? I log in via ssh, btw.
I use Debian 6 as my main distro, installed on partition 1 (sda1) on my laptop. After installing a second distro on sda2 everything still worked fine and both distros show up on the boot up screen. After installing a 3rd distro on sda3; suddenly my cursor (in Debian) is frozen and I can't use either the touch-pad or the 'left and right clickers'. It seems unlikely that this would have anything to do with installing another distro but on the other hand it is a bit of a coincidence...or? The cursor works on the 2nd OS. The 3rd has not yet showed up on the boot screen (I want to do a 'update-grub from within Debian)
I'm in somewhat of a sticky situation. ssh has just randomly stopped working on my server after a power failure. Everything else that doesn't rely on ssh is still working fine though. It can still receive mail and everything, just no ssh.Background on the server, running debian etch on a PPC machine.ssh is (supposed to be) running on port 2000. Even if I am physically logged into the machine I can't log in with ssh -p 2000 user@127.0.0.1. I can ssh to and from any other machine on my network (the server can even ssh into another machine). So it isn't my network causing issues.It seems like the port 2000 is completely closed, if nmap the server's IP address I get PORT STATE SERVICE
25/tcp open smtp 80/tcp open http 110/tcp open pop3
I did some mess with adobe flash player and now I have no soound on my Thinkpad T60.
root@debian:/etc/modprobe.d# dpkg -l|grep alsa ii alsa-base 1.0.25+3~deb7u1 all ALSA driver configuration files ii alsa-utils 1.0.25-4 i386 Utilities for configuring and using ALSA ii bluez-alsa:i386 4.99-2 i386 Bluetooth ALSA support ii libsox-fmt-alsa 14.4.0-3 i386 SoX alsa format I/O library ii libwine-alsa:i386 1.4.1-4 i386 Windows API implementation - ALSA sound module
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
Debian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
sometime ago i have setup a nice Debian FTP server. and left the company. everything was working fine for about 5 month, administrator was able to login to root, do changes and manage system, etc. Suddenly he told me that he cannot login via PUTTY, the root user and pass say Access Denied.Looked all over the web for at least a REASON, but did not find anything. I suggested to go and do passwd reset, via runLevel 1. i hope this helps him. But i am still curious why all of the sudden, in a locked down room, where only one person has access root get disabled.
I installed Jessie (8.1.0) and encountered a problem which is non-existent in Wheezy (7.8.0).
My shell is zsh and I use tmux both installed from packages, I use this zsh feature that when you type "ls /" and then hit "Tab" twice, it will present you a menu where you can select the directory you want navigating the menu with the arrow keys. It works fine out of tmux (in bare shell) but stopped working inside a tmux session. In bare shell you hit Tab twice and get into the menu, in tmux you hit Tab twice and it displays the table of suggestions but just keeps cycling suggestions (cycling directory names) and not sending me to the menu.
Here's some screenshots:
1) Working (no tmux): I hit tab twice and got in the menu.
2) Not working (in tmux): I hit tab twice and it just cycled directory names after "/"
t isn't in my config file, I tried without my .tmux.conf (with tmux set to default settings) and it still had no effect.
I was running 2.6.26 and I've recently upgraded to 2.6.32-trunk-amd64 along with other packages (mostly dependencies)... which possibly involved the network stack.
After this upgrade my home gateway stopped working and I'm clueless to where the problem may be.
I can see that the iptables are still there when I type: