I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 RepliesI am running F15 Beta i686 (Gnome3) Desktop on a dual-core, 4 Mb DDR2 system. I already installed hplip and hpijs drivers and connected HP LaserJet 5MP printer to the parallel port of my PC. Set up was by running "system-config-printer", adding device URI=parallel:/dev/lp0, and selecting approriate driver (CUPS+Gutenprint (en) for the printer. However, when I chose to print a test page, nothing came out and the printer window says the printer is not connected. This is even though I can print from Fedora14 installed on the same PC.
View 2 Replies View Relatedi recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies View Relatedi used ubuntu maybe for a year but i dislike unity and i installed gnome 3 via ppa but it wasn't so stable.now i installed fedora on my netbook and really like!Gnome 3 is very stable but i have a problem with my printer.Fedora notices it plugged in my printer HP Laserjet p1005 but it doesn't find any drivers.
View 1 Replies View RelatedMy printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
View 14 Replies View RelatedTransmission stopped functioning and i # kill 1484 . Looking at # top i see now one zombie task which must be transmission. 1484 user 20 0 0 0 0 Z 0.0 0.0 22.18.33 transmission <defunct> What can i do apart from shutting X or rebooting?
View 13 Replies View RelatedProgram Knoppix 3.1 cdr
Computer Dell 2600.
Floppy start up yields a stopped functioning computer with the following line:
"Probing SCSI... aic7xxx0"
At this point the computer is locked up and I have to turn it off. A restart causes the same action.
I was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
View 3 Replies View RelatedI have been given a HP laserjet 1320 printer. how to make it work?
View 9 Replies View Relatedhow to install my hp laserjet 1010 printer on red hat el5.when i connect my printer, a new window pops up detecting a new hardware but my printer's name or the driver is not listed. i have the printer's driver cd which is for windows.
View 7 Replies View RelatedI can't make work my HP LaserJet P1006 printer on USB with OpenSUSE.
It's being detected as usb://HP/LaserJet P1006 but there is no specific driver for it. I try to use the generic HP LaserJet driver but didn't work. There is no driver for P1005 model, either.
Someone had the same problem here: Cups Printer Driver Incompatibility Hp Laserjet P1006 Printer
Whenever I send a document to print on my USB Printer, as mentioned in title, it just sits and waits and after a minute or so the hp-toolbox resturns this error.
Status: Printer queue stopped Code: 700
Status: Device Communication Error Code: 5012
I know my printer is OK since I print with it on my Windows machine.
I've been banging my head for two days now trying to get my HP Laserjet 1020 to work. I've gotten the drivers working on the box itself (Opensuse 11.3 x64), but I couldn't get it to print from my laptop (Ubuntu Lucid). Ideally, I'd like to end up with a functional printer which can be used either from the desktop machine (Opensuse) or from the laptop (Ubuntu) through NFS.
After so many attempts at fixing it, I've not made it such that I can't print at all, from either system. I'm considering re-installing Opensuse (or just going back to Kubuntu, which recognizes the printer without a hitch). But before I do so, I figured I'd ask here.
Here are my issues, and attempts at solution:
1) I tried adding the printer both through CUPS, through YAST and through hp-setup, using the hpijs driver. Each time the printer is recognized, but a test page won't print.
2) I tried building the foo2zjs driver, as outlined here: HowTo Install a HP LaserJet 1020 printer in Suse 10.x, 11.x It came up with dependency problems repeatedly on the last step (sudo make install-hotplug) . I gave up when it told me that it was conflicting with an installed package (system-config-printer-udev) which was not installed.
3) Perhaps related problem: on the CUPS web interface, I get a "forbidden" message when I try to change the options on the CUPS server to allow remote access.
Note that:
a) I've already added myself to the lp group.
b) I changed the permissions (+rx) on the /dev/lp0 to allow myself access
c) I'm able to get to the CUPS page on the client machine, so the port 631 (I think) must be open. I say "I think," because there's no option to allow CUPS in YAST firewall settings, for some reason.
I've been following guides here and there, but I'm afraid that I've borked my cupsd.conf file through all the edits. Here it is:
Code:
How to find printer drivers for the following printers
HP Laserjet 1020
Cannon iP1900
after my update to 11.4, I am having trouble with my printer.
hplip is installed (3.11.5), but it does not start the printer queue. If I click to start the queue, it seems to start, but no printing jobs are sent to the printer.
opening the hplip gui spits out an error message: device communication error 5012
I have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
I bought my HP P1102w printer specifically because it works in Linux, and it did in Fedora 14 after installing the hplip from HP, not the repository.
After upgrading to F15, the printer was no longer there. /var/log/messages saw the printer, but claimed "io/hpmud/model.c 625: unable to find [hp_laserjet_professional_p1102w] support-type in /usr/share/hplip/data/models/models.dat", which is strange because I found that exact line in that file.
Anyway, I downloaded hplip from [URL] and installed it.
Plugging in the USB cable now looks good:
Code:
Jul 16 17:33:31 goldfinch kernel: [ 7410.596258] usb 1-5.3.2: new high speed USB device using ehci_hcd and address 9
Jul 16 17:33:31 goldfinch kernel: [ 7410.681937] usb 1-5.3.2: New USB device found, idVendor=03f0, idProduct=032a
Jul 16 17:33:31 goldfinch kernel: [ 7410.681942] usb 1-5.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code]...
I then tried system-config-printer and it detected the printer on the wireless network. (I really needed to print something, so I had set it up in a Windows XP virtual machine.) So now I have the printer displayed as a network printer, but it still can't print anything. The test page diagnostics spits out the attached debug log. The only thing that stands out to me is the error claiming that my HP printer isn't an HP.
My elderly HP Laserjet 4P has worked well for over 15 years. I have it connected to the home network via a Trendnet TE100-P21 Print Server, and setup has always been straightforward and easy. The whole setup has worked quite well with Fedora 9 or 10 thru 14, but then stopped working within the last couple of weeks. I'm assuming an update broke something, as I can find no other reason. When I send a print job or test page, I get a Print Error dialog. The print que shows a "stopped" status for the job. In the Error dialog I use the Diagnose button and step through until I get the Status Messages dialog, which informs me: "The printer's state message is: 'Data file sent successfully'".
Then I enable debugging and send a test page. Stepping through the dialogs it tells me it cannot detect a problem, and gives me an error log, which I've attached. The Trendnet server has a web admin interface. In that interface I can send a test page successfully. Also, I can open a VirtualBox (Windows XP) in Fedora 14, and successfully print from it. My print setup in Fedora is the same as it has been for several years now, and nothing has changed on that end. I have rebooted Fedora and the Trendnet server. All other computers/OS's on the network have no problem printing, only this Fedora 14, and only recently.
I get this error when i open Synaptic and Update Manager
Code:
E: Encountered a section with no Package: header
E: Problem with MergeList
[code]....
My printer had been working in 10.04 for a couple months. It still does work when I boot from a 9.04 live CD, so I know it really is "connected" hardware-wise.
View 8 Replies View RelatedI have installed an HP LaserJet 4250 using the hp 4250 postscript driver. The printing works but when I click on File->Print on any application (Open Office or Document Viewer), the message "Getting printer information" is beside the printer name and the print button is disabled. After 5 or so seconds, the print button becomes enabled and I can print. This happens every time but did not when I first installed the printer. I would prefer to determine the cause rather than delete and re-install the printer.
View 7 Replies View RelatedI have a Canon Pixma iP4000. It worked in 11.1, and worked until recently in 11.2. But now it does not work. When I try to print anything with it I get the error:
"Unable to find Gutenprint driver named "Canon PIXMA iP4000"!"
I have tried deleting the printer and setting it up several times in both the YaST printer module and http://localhost:631/. Nothing changes. I am using the driver it suggests and the driver definitely exists. I have tried reinstalling all of my cups and gutenprint-related software as well. I am using an up-to-date x86-64 system.
Trying to figure out why my printer stopped working. I thought it might be a usb problem, but when I moved it to another machine and reinstalled, I have the same problem. I can configure the printer and queue up jobs. I see cups starting gs, but nothing going to the printer. I've installed the latest packages from hp. Used to work.
View 2 Replies View RelatedI was always able to print with my HP OfficeJet 700 printer in Linux, but all of a sudden when I need to print something important, it doesn't work?! It says the print job stopped. It only printed 1/4 of 1/4 of what I needed to print. It has the correct print settings, etc... but I can't print?! Please help. It was able to print the test page before, but now even that won't print. Even CUPS is having problems connecting to the server. Printing in Windows has the same problem.
View 14 Replies View RelatedMy printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code:
D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files
D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
[code]....
Trying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot
Got: CUPS Service Stopped
The CUPS printer spooler does not appear to be running. To correct this choose
system -> Administration -> Services
There is not "Services there"
What to do? Ubuntu 10.04 LTS
After upgrading to OpenSuse 11.4, my CANON LBP5050n printer stopped working.
I have cndrvcups-capt-2.20-1.x86_64 installed and these are the command which used to work:
Under Fedora 12, the HP laserjet p2035 is supported. It appears under HP>Laserjet as a dirver option when setting up the printer. But all the HP driver options except two havedisiappeared under Fedora 13 (64 bit version).
I may be missing some package, but if so I don't know what. I didn't have to do anything special, I think, for Fedora 12.
Also, I can't set up the printer as a windows printer. I don't know if it is because none of the driver options work or because of something else. I often have problems setting up remote printing with a new release, so I expected this. But I'm not sure where to begin troubleshooting.
I've searched these forums high and low, but I can't seem to find a way to fix it. I had a similar problem in F10, but that was fixed. The problem I'm having now is a little bit different. If I open the print que before I print something like a test page, and then start printing, an item with appear in the que for a second then disappears, and the printer will do nothing. I've run out of ideas on how to get it to work, I did try to apply the original fix for my first problem since it seemed that the drivers for the Printer that were available via HP weren't quite right, but that didn't work. I tried to run -c 'yum install foo2zjs' and that didn't do anything either.
View 2 Replies View RelatedI have a hp officejet on my fedora 13 pc. I tried to configure it as a network printer. I disabled selinux and then i opend the door in the firewall.. the printer is seen in the network but when I try to print from a client it says "printer description not available" . I disabled then firewall both on server and on client. then rebooted both. but no luck. the printer is available on the network but it prints only from the server.
View 2 Replies View Related