I use a network printer (HP Laserjet 1300n). Since a few days ago I couldn't print anything, the error message is 'Unable to write print data:Broken pipe'. What could be wrong? I replaced the cartridge recently, but nothing else.
View 11 Replies
I have installed my Konica Minolta mc 2430dl printer (opensuse 11.2 x64).
View 2 Replies View RelatedI have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
I have tried to download the latest version of CUPS but do not know how to install it properly using command line commands above 'sudo' and 'sh', and I have tried to install HPLIP but it needs 'cups-devel' installed apparently. My Debian can see the 1020 clearly enough to identify it and give its status as idle, via the CUPS interface. When I try and print a Test page it goes to the spooler, says it is printing OK, but nothing prints. The job then disappears and appears on CUPS as completed. In the old days we would have sent a eof() to make the printer work. Have I got a bug in my HP Laserjet 1020 driver? Or am I missing the great plug-in that is not on the Synaptic Package Manager The SPM says I have HPLIP installed.
View 5 Replies View RelatedI have a hp p1102w laserjet printer that works in windows. However after connecting it through Suse Linux 11.2 it is recognized and the printer name is showing but there is no driver for the printer. This is a usb connection. I have an 1100a laserjet connected that works but it is a parallel port.
Any suggestions? I haven't been able to find any special drivers on the web.
jim
I'm having trouble getting this printer to print. It'll scan fine, but it won't print. I keep getting the following error:
the printer's state message is: '/usr/lib/cups/filter/foomatic-rip failed'
I have searched and searched and tried numerous things, but I just can't get it to print. (I tried to post the debugging output here, but the forum kept wiping out my post).
I've been banging my head for two days now trying to get my HP Laserjet 1020 to work. I've gotten the drivers working on the box itself (Opensuse 11.3 x64), but I couldn't get it to print from my laptop (Ubuntu Lucid). Ideally, I'd like to end up with a functional printer which can be used either from the desktop machine (Opensuse) or from the laptop (Ubuntu) through NFS.
After so many attempts at fixing it, I've not made it such that I can't print at all, from either system. I'm considering re-installing Opensuse (or just going back to Kubuntu, which recognizes the printer without a hitch). But before I do so, I figured I'd ask here.
Here are my issues, and attempts at solution:
1) I tried adding the printer both through CUPS, through YAST and through hp-setup, using the hpijs driver. Each time the printer is recognized, but a test page won't print.
2) I tried building the foo2zjs driver, as outlined here: HowTo Install a HP LaserJet 1020 printer in Suse 10.x, 11.x It came up with dependency problems repeatedly on the last step (sudo make install-hotplug) . I gave up when it told me that it was conflicting with an installed package (system-config-printer-udev) which was not installed.
3) Perhaps related problem: on the CUPS web interface, I get a "forbidden" message when I try to change the options on the CUPS server to allow remote access.
Note that:
a) I've already added myself to the lp group.
b) I changed the permissions (+rx) on the /dev/lp0 to allow myself access
c) I'm able to get to the CUPS page on the client machine, so the port 631 (I think) must be open. I say "I think," because there's no option to allow CUPS in YAST firewall settings, for some reason.
I've been following guides here and there, but I'm afraid that I've borked my cupsd.conf file through all the edits. Here it is:
Code:
My LaserJet is connected to an old desktop machine that has it shared. The configuration on that desktop is correct, since I have been printing through it from other Windows machines for a long time (and it still works now).
I recently started dual-booting Ubuntu 10.10 on my otherwise Windows laptop, and I've gotten everything basically working how I like it, except that I can't get connected to that printer.
The Vista machine is at IP address 192.168.0.103, and the printer is shared as LaserJet. It's set up with workgroup MSHOME.
When I go to add a printer in Ubuntu, I click the Browse button under "SMB Printer," and I see the MSHOME workgroup, but when I try to expand it, there's nothing inside.
If I try to type in the address directly (smb://192.168.0.103/LaserJet), the Verify button tells me "Print Share Inaccessible, Connection timed out." Note that I can ping 192.168.0.103 fine. I can continue through the rest of the wizard, but I obviously can't print anything out after I finish the setup, since the connection is failing for some reason.
There is no username or password required to see the shared printer.
Any idea what could be going on here? I'm kind of at wit's end here, and I'd love to be able to ditch Windows--with the obvious exception of Starcraft II, of course
We have workgroup network in the home and the printer "hp laserjet p1005" connected at the server (OS : windows server 2003) and I am connected to the Internet by the server without problems. But when I want to print any file, it remains in (processing) and no print. It's picture for this problem:
View 9 Replies View RelatedI'm running Kubuntu 11.04 and LibreOffice Writer 3.3.2. I'm trying to print a #10 envelope on an HP LaserJet 5M printer. When I create the envelope and attempt to print it, LIbreOffice sets the paper size to #10 Envelope, as it should. I put the envelope into the manual feed tray and initiate the actual printing operation. The printer goes through the motions of processing the output -- and then goes back to the READY state without printing anything. I've tried using all possible Paper Tray settings and also using the CUPS drivers rather than the Foomatic drivers. None of that makes a difference. What does make a difference is setting the paper size to Letter, but then, of course, the information prints in the wrong place on the page.
View 2 Replies View RelatedUnfortunately my usb HP LaserJet 1005 printer stopped working since 16th august. It is running under CUPS 1.3.8, with foo2zjs driver (the only one that supports laserjet 1005). I'm not sure, but this is probably related to the updates I've done recently (I don't exactly remember when I did it, but I think it was before the 16th). Here's what I've done:
Code:
# aptitude update
# aptitude dist-upgrade
As this is a home box, I haven't done that for some months, so a lot of stuff has been updated. I'm afraid some CUPS library has been updated and is now bugged, because it always worked without any problem. My question is whether or not there are known bugs on last CUPS version with hp laserjet and if there's any solution to work it out. I already tried to reinstall the printer, reboot the box, plug it to other USB port, reboot the printer, set it as default printer, and many more things. Google search didn't turn up nothing useful. The problem is not on the printer because I plugged it to my windows pc and it worked like a charm, so I'm pretty sure some stupid configuration or bug is messing arround with my printer
[Code]...
I am trying to print a schematic from KPDF (Suse 11.2) onto an 11x17 sheet of paper. Regardless of the printer settings I use or which driver I choose it won't rotate the image and fill the page. I have the same problem with kiCAD. If I use Okular it prints part of the drawing in one corner at the 8.5x11 scale.
View 3 Replies View RelatedI using fedora 14 and two HDD one for O.S and other for data. I manually mount the data HDD each time I put on my PC I want to write a Shell Script which will mount the data HDD on boot.
View 4 Replies View RelatedMy wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedAfter installing Fedora 12 my printer Samsung clp 310 doesn't print. When trying to print SELinux prevents printing. Changed SELinx to disabled didn't help, it still doesn't print. In 11 it worked just fine.
View 1 Replies View RelatedI am trying to connect to a network printer Dell 3110cn from Fedora 14 x64. Till a few days ago, everything was fine. However, over the last few days, I am unable to print anything using my old settings and I am unable to print even if I delete the printer and reinstall it.
During setup, Fedora is able to connect to the printer and I am able to install the drivers and everything. But, when I print something (even the test page), I get the error message
"Unable to write print data - Broken pipe'.
I have searched online quite a bit about this problem. Most suggestions were to look if the printer status was "Idle - Ready/Accepting Jobs" since the problem in those cases was that the printer status was "Printer not ready". But in my case, the printer is recognized but unable to print.
Im trying to set up a print server using Fedora 12 and CUPS.
It recognized the printer, and i can print from the linux box. When i try to install it on my Win 7 64-bit box i can install the printer itself by giving it the IP address and port number of the linux box but i cant sent anything to it to print. I apologize im a little rough on the details, im not at home right now. I believe the printer i have is a HP PSC 1500. I opened the cups port on the linux firewall, and i shared the printer through the cups admin browser page.
I have a problem with my WiFi HP LaserJet P1102w printer. I can add the printer, but whenever I try to print anything, say, HP testpage, I get the following errors:
Code: Select allerror: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_Professional_P_1102w?ip=192.168.1.6
error: Unable to print to printer. Please check device and try again.
error: Unable to communicate with printer HP_LaserJet_Professional_P_1102w. Please check the printer and try again.
I'm using current testing repos and the system is updated.
The printer is detected and installed via hp-setup, it just doesn't print.
This setup used to work, but I haven't printed anything in a while so can't be sure what caused it to stop working: updates, recent power outage or something else.
Printer is using a static IP address.
What works:
Printing over USB works.
Printing over WiFi from a different, Windows, PC works.
Pinging the printer (connected over a WiFi router) works. Also, opening the printer admin page works.
What I've tried:
Restarting everything.
Purging all hplip packages and reinstalling.
Installation log: [URL] ....
hp-check: [URL] .....
I'm stuck.
The application I am using writes a report file (ascii), but I am not able to print it, because from inside the application I have no access to the shell and so cannot invoke any printing command (lpr, lp, ...). Is there a tool/daemon which waits for a file in a given directory, takes it, and sends it to a printer?
View 6 Replies View RelatedI am trying to scrape all of the info off of an old Fedora disk so that I can referb the box and put new stuff on it, but for some reason I can't get the permissions (even as root) to write to the disk.
It is currently mounted under /media/backup and I can browse it all I want, but still can't write.
In one of our client system there is a partition which shows NTFS and other partitions are ext3...the partition which shows NTFS is a seperate HDD...The NTFS partition has been mounted...but we are not able to write anything to it...but we checked in /etc/fstab....it shows 'ro' so we changed to defaults....after making chnages when we tried to remount using the command mount -o remount /partition.it shows the device is already been in use try using the command fuser or lsof.we tried fuser /partition and then killed that process..still same error.....I would also like to know is there a way that we convert the NTFS partition to ext3 without losing the datas.
View 2 Replies View Relatedi was wondering if anyone could give some advice on how to write a bash script that would print processes using more than x mb or x% of the CPU?
View 2 Replies View RelatedI have installed open office 2.3 on my fedora system . I have also installed skim , m17 , fonts , im-chooser packages to support writing in my local indian language ( kannada is supported ) . But still i am not able to write in my local langauge
View 1 Replies View RelatedI'm working with Radiotap headers right now. I want to get the RSSI data. I came through a problem that I can't figure out right now.The value that I need to get is:
Code:
s8 IEEE80211_RADIOTAP_DBM_ANTSIGNAL
now, when I printf it:
[code]...
I have just set up an FC 13 box for a small network application. At the core, the application is supposed to receive some data over a multicast on my local network. However, for some reason, I am not being able to receive any multicast data on this machine. Other machines, on the same network (connected on the same layer 2 switch) are receiving the multicast just fine. I have tried the following things:
1. ensure that I am joining the multicast on the correct interface: the machine has only one ethernet card. Also, after starting my application, I use netstat -g to check for group membership. The multicast subscription shows up fine.
2. ensure there is no error in the program: the program works fine on my person linux machine
3. ensure that the multicast is actually available: it is available on all other local machines. I also wrote my own small broadcaster. data from this broadcaster (running on the same box) is available to other machines but not to my own listener program.
4. no firewall/filtering settings on the layer2 switch
5. TTL setting on the broadcast: have tried changing it from 1 through 5 with no effect. Note that even if the broadcast is coming from the same machine, my machine does not pick it up while other machines on the network do so.
I suspect this has to do with some settings on the network card itself. Below is the output of /sbin/ifconfig on the card:
eth0 Link encap:Ethernet HWaddr 00:08:A1:67:BBA
inet addr:192.200.20.32 Bcast:192.200.20.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe67:bbca/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
I have a problem with arrays in awk. What i want is to take some data from a file (ssh log) and print it to a html table. I have managed to print some stuff (user logged in and how many times they have logged in) What i want more is to take all the ip that each user logged in from and print it in a row next to the username and times (in the code i typed blabbla where i want the ip to be shown. How do you think i should approch that, multidimensional arrys maybe?
Code:
When I am installing texlive package power gone suddenly. From that time onwards yum update command is not working. It is giving error as follows:
Loaded plugins: presto, refresh-packagekit, security [URL]: [Errno 14] HTTP Error 404 : [URL]
Trying other mirror.
Skipping security plugin, no data
Setting up Update Process
Resolving Dependencies
Skipping security plugin, no data
--> Running transaction check
--> Processing Dependency: libkpathsea.so.4 for package: evince-dvi-2.30.3-1.fc13.i686
---> Package texlive-kpathsea-doc.noarch 0:2010-8.svn19287.fc13 set to be updated
--> Finished Dependency Resolution
Error: Package: evince-dvi-2.30.3-1.fc13.i686 (@updates)
Requires: libkpathsea.so.4
Removing: kpathsea-2007-51.fc13.i686 (@updates)
Available: kpathsea-2007-49.fc13.i686 (fedora)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I already tried this commands but again I have problem:
yum-complete-transaction first
rpm -e texlive
yum install libkpathsea.so.4
Under Fedora 12, the HP laserjet p2035 is supported. It appears under HP>Laserjet as a dirver option when setting up the printer. But all the HP driver options except two havedisiappeared under Fedora 13 (64 bit version).
I may be missing some package, but if so I don't know what. I didn't have to do anything special, I think, for Fedora 12.
Also, I can't set up the printer as a windows printer. I don't know if it is because none of the driver options work or because of something else. I often have problems setting up remote printing with a new release, so I expected this. But I'm not sure where to begin troubleshooting.
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies View RelatedI am trying to send text data from one PC to other using Serial cable. One of the PC is running linux and I am sending data from it using write(2) system call. The log size is approx 65K bytes but the write(2) system call returns some 4K bytes (i.e. this much amount of data is getting transferred). I tried breaking the data in chunks of 4K but write(2) returns -1.My question is that "Is there any buffer limit for writing data on serial port? or can I send data of any size?. Also do I need to continously read data from other PC as I write 4K chunk of data"Do I need to do any special configuration in termios structure for sending (huge) data?
View 4 Replies View Related
