Hardware :: LaserJet 6P Printing Pages Of Garbage

Nov 2, 2009

Inherited an old Laserjet 6P that was working fine XP. No matter which printer driver I use all I get are pages and pages of garbage during the test print. I have tried the hplip, gimp, ljet4 drivers without success. I have tried sending text files from the command line as well (cat /etc/passwd > /dev/lp0) with the same result.

Fedora 11 64
cups 1.4
hplip-3.9
hpijs-3.9

Anyone using this printer with cups 1.4? Any ideas which driver to use?

View 4 Replies


ADVERTISEMENT

Ubuntu :: HP LaserJet 1000 Not Printing On Lucid?

Aug 17, 2010

I'm converting my coworker to Linux (who loves it) and I've gotten everything working but this %$#@ printer! I've tried the various solutions posted on these forums (over the past 4 or 5 years). But none of them seem to work.Has anyone solved this problem with Lucid (10.04)? Are there some new steps that pertain to 10.04?

View 2 Replies View Related

CentOS 5 :: Slow Printing On HP Laserjet 2100?

Aug 25, 2010

I just installed CentOS on my Compaq desktop pc with HP laserjet 2100 printer on parallel port.However it takes an extremely long time to print.

View 3 Replies View Related

Fedora Hardware :: Hp Laserjet P1007 Printer Not Printing?

May 29, 2011

i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..

View 1 Replies View Related

Software :: Gqview Printing To HP LaserJet 5P Gives Coarse Dithering

Oct 20, 2009

I am using gqview as an image viewer (under Debian Lenny). When I use gqview to print files to a HP LaserJet 5P printer, the dithering of graphics is quite coarse (click for view of printout scanned at 300dpi): gqview.jpg

On the other hand, if I use gimp to print it, the output is normal (click for view of printout scanned at 300dpi): gimp.jpg

I have tried changing the CUPS resolution settings for the printer (they are set to grayscale 600dpi), and the resolution setting in gqview (also set to 600dpi), but this doesn't help. Printing to a different printer (HP LaserJet 2605) does not exhibit the same behaviour!

View 8 Replies View Related

Hardware :: CUPS And HP LaserJet P1505n - Green Button Press Required For Printing

Feb 21, 2011

At work I've got a HP LaserJet P1505n printer that is used as network printer. It has an ethernet port and is plugged in directly into the network. Everybody in the office is using Windows and has no problems working with it. After a few hours of google-ing, I also managed to set it up with CUPS as a LPD printer, with some problems: every time I send a document to it, it goes into the "error" state, and I have to press the "green" button for the printer to start printing. Is there a way to work around these errors? I tried to google for these kind of errors, but couldn't find anything useful.

View 3 Replies View Related

Ubuntu :: HP Printer Printing Black Pages?

Apr 24, 2011

Thought I'd post this as I couldn't find much about it online. I have an HP3745 and am running Ubuntu 10.04. For some reason I couldn't get anything from the black ink cartridge in test mode or for real. The printer would go through the motions but would return a blank page. Turns out it was because my COLOUR ink cartridge was empty!! Solution was simply to select print in grayscale. Also I find with this particular printer HPCUPS works better than HPLIP.

View 1 Replies View Related

Ubuntu :: Printing Blank Pages Of PDF Files

May 29, 2011

I am having problems in printing 'complex' PDF files. Simple pages are no problem. Good examples is Royal Mail postage printing. Generated PDF displays correctly - and in Ubuntu 10.10 printed perfectly. Since I upgraded to 11.04 I get a blank page. No matter what I do. I have tried everything suggested when I googled the problem - but no solution works. I am printing across the network through my NAS box (no changes to that at all) to an HP Laserjet 1010. It all works correctly and as expected under Windows - so the setup is fine with printer and NAS. its a problem introduced by 11.04.

View 3 Replies View Related

Software :: Printing Main Pages From Emacs?

Mar 23, 2011

I have a postscript printer. Whenever I request that Emacs print a man page it returns with a list of characters that it cannot print. Is there anyway to remedy this situation?

View 9 Replies View Related

Ubuntu :: Adobe Reader 9 Printing Blank Pages?

Jun 1, 2011

Im unable to print pdfs. the printer only gives me a blank page. what do i need so it can print? I tried going to "advanced" and checking "print as image" but it does not work. Printer still gives me a blank page.

I have an HP printer Photosmart C6100 series.

View 6 Replies View Related

Ubuntu :: Printing Gets Infinite Loop Of Blank Pages?

Jun 25, 2011

I installed Xubuntu and was thrilled to see that it had already setup my Brother HL-2140 USB laser printer.However, there is something seriously wrong with the setup. When you try and print, even a test page - it just churns through the entire paper tray printing nothing. Also, when you restart the computer it tries to print the jobs again. I went to Printing and selected the printer but could not find where you could see the print job queue. I did see it during troubleshooting and was able to delete the jobs on the troubleshooting screen.

View 3 Replies View Related

Software :: Accurately Printing Out Individual Pages From The Internet?

May 28, 2010

I would often like to print out information from a page on a website. I don't want all the rest of it - the pages before and after.

The trouble is that the websites page numbering, when it is available, doesn't often conform to my printer and the size of the page on the screen. So I guess at,say,page 6 and get something like page 3 if I printed it all out.

View 4 Replies View Related

Fedora :: Printing Large Image Over Multiple Pages In GIMP

Dec 8, 2009

I have a large image that I want to print over 4 pages, each page showing 1/4 of the overall image, that I will past together. I'm doing this from GIMP on an up-to-date fc12 system. Searching around I find that there is a "scale" field in the print dialog and the lp command that cups supports and according to the documentation if I set scale to "200%" it should do what I want.However, when I set scale to 200% I get only one page with the upper left 1/4 of the page and then nothing. How do I get it to print the remaining 3 pages?

View 1 Replies View Related

Fedora Hardware :: Brother MFC 240C Not Printing - No Pages Found

May 30, 2011

This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.

Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm

View 14 Replies View Related

OpenSUSE Hardware :: Printing Multiple Pages Per Sheet Fails In 11.4

Mar 28, 2011

Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),

View 3 Replies View Related

Hardware :: D1560 Printer Is Printing Blank Pages Under Ubuntu?

Mar 16, 2010

I have dualboot between Windows XP and Ubuntu 9.04. I have HP deskjet prineter, model=D1560. Ubuntu installed the printer automatically. The problem is that when I print any page in Ubuntu, the printer does not print anything and eject the page blank. But Windows XP is printing finely.

View 1 Replies View Related

Slackware :: Printing Full Black Pages And Cups Shows Errors

Jun 24, 2010

I upgraded from 13.0 to 13.1 and now I have strange behaviors with the printer. It is an Epson Stylus Photo RX640. It was working well with the vanilla Gutenprint 5.2.2 that came in Slack 13.0. The printer is shared and used from other slackware boxes and a mac. Upgrade to 13.1 (gutenprint gets to be 5.2.4) ...

Now when I print from the machine that has the printer attached I get full black pages, and cups shows errors. The Mac is still able to print well (probably because it is using its own PPD and passing through directly to the printer). I then removed gutenprint, and then removed the 5.2.2 PPDs (that were still in the system). Reinstalled gutenprint from the Slackware 13.1 distro. And the problem persists.

[Code]....

View 2 Replies View Related

Fedora :: Apache Not Parsing Php Pages / Trying To Run Php Script In Browser Its Not Opening Php Pages?

Feb 19, 2010

I have a Cent OS 5.4 32 bit final installed in my dedicated server.

I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.

Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.

Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..

View 2 Replies View Related

General :: Man Pages Not Displayed / Saying Formatting Pages And Then It Is Displaying Blank Page?

Sep 9, 2009

when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.

View 6 Replies View Related

Hardware :: Continuos Printing - Stop Ejecting The Paper After Printing Over?

Jul 28, 2010

We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.

View 2 Replies View Related

Ubuntu :: Printing With Exact Size Photos And With Poor Auto Colour Printing But The Situation Remains Unchanged

May 31, 2010

I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.

I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.

View 9 Replies View Related

Programming :: Garbage Collection In C?

Jan 7, 2010

I was wondering if it is possible to have a garbage collector in C, and would it be too difficult to create?

View 1 Replies View Related

Programming :: Eliminate Garbage From Buffer C++

Mar 4, 2010

Code:
char retBuffer[100];
recv(sock , retBuffer ,sizeof(retBuffer) , 0);

if i send a string smaller then my buffer size retBuffer always have garbage of the end of it....what can i do to eliminate tis problem ?

View 2 Replies View Related

Programming :: Implementing A Garbage Collector In C++?

Aug 27, 2009

I'm interested in writing a generational garbage collector in C++. This is for a Python-like programming language project. I have used Boehm's garbage collector before, but I'm worried that it will have noticeable pause times (unacceptable for interactive programs). Since I can't really find any other C++ established GCs out there, I have been thinking of simply writing my own.

However, there are two essential ingredients I need for this:

- Some kind of write barrier mechanism that will notify my collector when something is written to a part of the heap

- A way for me to know the addresses and sizes of the stack, heap and global storage (the root sets)

how to implement write barriers (and how to get the stack, heap and global storage information) on the Linux platform? As an alternative, if you know of C++ GCs other than Boehm, I would also be interested.

View 14 Replies View Related

Slackware :: Tell If Have 'garbage' In Root Partition?

Mar 7, 2011

My root partition /dev/sda1 is 24.41 GiB with 10.48 GiB used. How can I tell if I have inadvertently placed a bunch of garbage on this partition? Also, should I, and I use the term loosely, 'move' certain directories to my home partition /dev/sda3? (118.77 GiB with 3.14 GiB used)

Right now I believe that, rightly or wrongly, if I screw up my system, all I need to do is install my Clonezilla image back to /dev/sda1 and I will have a 'mostly' working system. If I 'move' anything out of /dev/sda1 to /dev/sda3, will this hold true? Or am I out to lunch on this assumption anyway?

View 14 Replies View Related

OpenSUSE :: Garbage In Yast2 In Text Mode?

Mar 5, 2011

if I open Yast2 via SSH I see the garbage (code page related issue; similar to this). If I set some other than UTF-8 in PuTTY (KOI8-U, iso-8859 etc) Yast looks good, but then the same problem appears with Midnight Commander. How can I have Yast to use 'right' UTF-8 instead of any legacy code pages? Or how better deal with the situation?

View 2 Replies View Related

General :: Running Git-svn With Cron Results In Garbage

Mar 25, 2010

I've setup a git-svn repo with cron to fetch from the svn repo daily. I have a script to do the fetching, and this is what is invoked by cron. Everything is fine with the repo, and the script works fine when executed manually. However, when it runs under cron, empty files get dropped into the .git directory. The files have names that look like they are some base64 output, e.g. juTrvjP6m8 and kcKf3hu3b4. Two of these files show up for every cron run. I thought these might be commit hashes, but they're not, git-show says it's an unknown revision. I set-up the repo as follows:

[code]...

The last line pushes the repo to a separate (bare) public repo from which others can clone. I'm piping the output from the cron job to a file, which looks like this:

[code]...

The line "fatal: unable to run 'git-svn'" is alarming, but the fetch seems to go ahead anyway. Where are these empty garbage files coming from, and how to stop them? Am I in for bigger problems in the future?

View 1 Replies View Related

Ubuntu Installation :: CD Drive Is Garbage And Won't Run The Installer?

Jan 6, 2010

I am trying to get a new box up. It has XP on one HDD. There is a second HDD, upon which I want to install Ubuntu and dual boot. My problem is that my CD drive is garbage and won't run the installer. Nor do I have any flash drives. Is it possible to install directly from Windows but not "within Windows" persay? If so, how is this done? (I do have Daemon Tools.)

View 2 Replies View Related

Ubuntu :: Some Japanese Text Comes Out As Garbage Characters

Jan 23, 2010

I have installed scim and anthy. Most Japanese characters display, but some websites and files show garbage characters. Is there any way to resolve this?

View 1 Replies View Related

Ubuntu :: Ati X1270 (RS690) Still Garbage Screen?

Apr 30, 2010

With 10.04 final i still have the issue with a very distorted screen. Works with RadeonHD driver but performance is utterly crap so no good solution. Also when adding new panels they become invisible and only a logout and login makes them visible around the border. Errors somehow related? How do i file a bug report?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved