Fedora Hardware :: Hp Laserjet 1015 Not Detected?
Jun 3, 2011
I am having problem printing some urgent documents. My fc14 machine cannot seem to see the printer. I remember on an earlier version it was a breeze ...I connected the printer and immediately the machine recognized it.I spent 2 hours trying to install hplip-gui.i686 0:3.11.5-1.fc14 successfully but yet the machine cannot see the printer.---------- Post added 3rd June 2011 at 08:16 AM ---------- Previous post was 2nd June 2011 at 11:59 PM ----------
View 8 Replies
ADVERTISEMENT
Sep 7, 2010
I have installed fedora 12 in my system. And I want to install hp laserjet 1015 printer in my system. or want to share the printer to give the all access printer permission.
View 2 Replies
View Related
Jul 26, 2010
Under Fedora 12, the HP laserjet p2035 is supported. It appears under HP>Laserjet as a dirver option when setting up the printer. But all the HP driver options except two havedisiappeared under Fedora 13 (64 bit version).
I may be missing some package, but if so I don't know what. I didn't have to do anything special, I think, for Fedora 12.
Also, I can't set up the printer as a windows printer. I don't know if it is because none of the driver options work or because of something else. I often have problems setting up remote printing with a new release, so I expected this. But I'm not sure where to begin troubleshooting.
View 10 Replies
View Related
Sep 14, 2010
Is the Asus eee PC 1015 PED compatible with Ubuntu? I am a raw beginner.
View 9 Replies
View Related
Nov 13, 2009
I've searched these forums high and low, but I can't seem to find a way to fix it. I had a similar problem in F10, but that was fixed. The problem I'm having now is a little bit different. If I open the print que before I print something like a test page, and then start printing, an item with appear in the que for a second then disappears, and the printer will do nothing. I've run out of ideas on how to get it to work, I did try to apply the original fix for my first problem since it seemed that the drivers for the Printer that were available via HP weren't quite right, but that didn't work. I tried to run -c 'yum install foo2zjs' and that didn't do anything either.
View 2 Replies
View Related
Sep 6, 2010
I have a hp officejet on my fedora 13 pc. I tried to configure it as a network printer. I disabled selinux and then i opend the door in the firewall.. the printer is seen in the network but when I try to print from a client it says "printer description not available" . I disabled then firewall both on server and on client. then rebooted both. but no luck. the printer is available on the network but it prints only from the server.
View 2 Replies
View Related
Apr 23, 2011
I am running F15 Beta i686 (Gnome3) Desktop on a dual-core, 4 Mb DDR2 system. I already installed hplip and hpijs drivers and connected HP LaserJet 5MP printer to the parallel port of my PC. Set up was by running "system-config-printer", adding device URI=parallel:/dev/lp0, and selecting approriate driver (CUPS+Gutenprint (en) for the printer. However, when I chose to print a test page, nothing came out and the printer window says the printer is not connected. This is even though I can print from Fedora14 installed on the same PC.
View 2 Replies
View Related
Feb 13, 2009
I tried to install HP laserjet P1007 printer in my fedora 8 desktop. I followed these instructions:
yum -y install gcc*
wget -O foo2zjs.tar.gz [URL]
tar zxvf foo2zjs.tar.gz
cd foo2zjs
[root@arnab~]# make
[root@arnab~]# make install
[root@arnab~]# make install-hotplug
$ ./getweb 1005
$ ./getweb 1006
$ ./getweb 1007
$ ./getweb 1008
system-config-printer
Then I found the printer and add it. But the problem is when I tried to try to print a test page, it shows "job1 submitted".....that's all. No page gets printed. If I try once more, it shows "job2 submitted" but again no results. I cant also see all the submitted jobs.
View 2 Replies
View Related
Aug 13, 2010
I loaded Ubuntu Remix onto my Eee PC 1015PE. I tried to install Desktop switcher and it messed up. But now I log into it using the Gnome Session which gives me the better desktop.
However.
The sound works fine though my speakers but when I connect headphones.
The sound stops from the speakers but does not work on the headphones.
Ubuntu 10.04 LTS the lucid lynx
Gnome 2.30.2
View 4 Replies
View Related
May 29, 2011
i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies
View Related
May 24, 2011
i used ubuntu maybe for a year but i dislike unity and i installed gnome 3 via ppa but it wasn't so stable.now i installed fedora on my netbook and really like!Gnome 3 is very stable but i have a problem with my printer.Fedora notices it plugged in my printer HP Laserjet p1005 but it doesn't find any drivers.
View 1 Replies
View Related
Sep 9, 2011
I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 Replies
View Related
Jun 25, 2011
I've recently installed 11.4 with KDE SC on my Eee PC 1015 PED netbook. I've had absolutely no problems with it, but after a reboot the speakers have stopped playing, I can only hear audio via headphones. I tried many settings in systemsettings and YAST, but nothing helps. Here's all the info I need to provide, according to the sticky thread:
The link from # alsa-info.sh: [URL]
The rest:
Code:
# rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.24-6.1.i586
alsa-firmware-1.0.24.1-3.1.noarch
alsa-plugins-1.0.24-6.1.i586
alsa-oss-1.0.17-32.1.i586
[Code].....
View 9 Replies
View Related
Jan 20, 2011
I start my new netbook and hit esc and I get my bootup options but it never shows my flash drive that I know is formatted correctly. Can anyone shed some light on this?
View 1 Replies
View Related
Jan 24, 2010
rpmbuild: ./libtool: line 1015: -e: command not foundDear Experts,As part of a solution here:[URL]I'm trying to create a binary RPM from a SRC.RPM file. I'm running Redhat 5. cat /etc/redhat-releaseEnterprise Linux Enterprise Linux Server release 5.2 (Carthage)uname -aLinux blue.gateway.2wire.net 2.6.18-92.el5PAE #1 SMP Fri May 23 22:26:05 EDT 2008 i686 i686 i386 GNU/LinuxI managed to find the source package I need:ompat-db-4.1.25-9.src.rpmBut I'm getting this error as part of the build process:./libtool: line 1015: -e: command not foundDoes anyone know the secret to getit to work?Please see more detail in the following notes
pwd
/tmp/compat-db-4.1.25-9.i386
ls -l
[code]....
View 1 Replies
View Related
Aug 23, 2011
I use a network printer (HP Laserjet 1300n). Since a few days ago I couldn't print anything, the error message is 'Unable to write print data:Broken pipe'. What could be wrong? I replaced the cartridge recently, but nothing else.
View 11 Replies
View Related
Oct 17, 2010
I've installed 10.10 on my Asus 1015PE and when I went to look at the partition table I couldn't get Gparted to stay open. When I click on it, it opens the window, says that it is searching then scanning, then the window and program closes. The window is up for maybe 3 seconds tops.
I've got two other ubuntu netbook versions running on the same machine and gparted works fine on those installs. I've tried completely removing gparted and reinstalling, I've rebooted, I've tried calling it from the terminal, but always the same: it opens, starts to scan and closes.
View 5 Replies
View Related
Aug 5, 2011
Who know how confiure a HP LaserJet P1102w on bebian 6?
View 3 Replies
View Related
Aug 31, 2010
how can i setup the HP Laserjet P1005 on slackware 13.1 ?
View 5 Replies
View Related
Jul 7, 2010
Is anyone else having problems with HP LaserJets and Ubuntu 10.04? I have a HP LaserJet 3015 and am running a dual boot with Windows 7.
Printer is automatically detected and works fine on: Windows 7, Windows XP, LinuxMint, and older versions of Ubuntu.
But when I'm running Ubuntu 10.04, when I try to print it just adds the job to the print queue and it never prints. After awhile I get a message saying that Ubuntu is unable to communicate with my printer. (or something to that effect). I can't even print a test page.
I have tried installing HPLIP following the directions given, but get the same behavior (can't communicate with the printer). I have tried unplugging the power cord and usb cable and plugging them back in (as per the directions I am following). But still not communicating.
View 7 Replies
View Related
Jul 5, 2011
I have recently installed fedora 15, I'm trying to connect my mobile phone to my laptop through bluetooth, when I did setup new device it is just showing device address and (instead of name), and the forward button is not enabled..FYI - I have started and enabled the bluetooth services using systemctl
View 9 Replies
View Related
Jun 22, 2010
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
View 14 Replies
View Related
Feb 2, 2010
I have tried to download the latest version of CUPS but do not know how to install it properly using command line commands above 'sudo' and 'sh', and I have tried to install HPLIP but it needs 'cups-devel' installed apparently. My Debian can see the 1020 clearly enough to identify it and give its status as idle, via the CUPS interface. When I try and print a Test page it goes to the spooler, says it is printing OK, but nothing prints. The job then disappears and appears on CUPS as completed. In the old days we would have sent a eof() to make the printer work. Have I got a bug in my HP Laserjet 1020 driver? Or am I missing the great plug-in that is not on the Synaptic Package Manager The SPM says I have HPLIP installed.
View 5 Replies
View Related
Aug 17, 2010
I'm converting my coworker to Linux (who loves it) and I've gotten everything working but this %$#@ printer! I've tried the various solutions posted on these forums (over the past 4 or 5 years). But none of them seem to work.Has anyone solved this problem with Lucid (10.04)? Are there some new steps that pertain to 10.04?
View 2 Replies
View Related
Oct 21, 2010
I have been given a HP laserjet 1320 printer. how to make it work?
View 9 Replies
View Related
Dec 9, 2010
I've just received my hp laserjet pro m1212nf printer / fax /scanner device. It's installed as a Ethernet printer. First I had troubles with the printer. I could solve it by running
Code:
$ sudo hp-plugin
and then reinstalling the printer from the HP Device manager utility.
During the installation the tool also told me:
Code:
Unable to locate the HPLIP Fax PPD file:
HP-Fax3-hpcups.ppd.gz
Fax setup has been disabled.
[Code]...
View 9 Replies
View Related
Mar 15, 2011
I'm trying to connect Ubuntu (wubi installation on Windows) to an HP LaserJet 2100M printer via a USB cable which worked on Vista (I'm migrating away from Vista into Ubuntu).
System > Administration > Printing..I could not see or add any printer.
I searched around and followed these instructions ..
How to Install HP Printer Driver onto Ubuntu 10.10
[url]
I downloaded hplip-3.11.1.run but in following installation instructions I think I may have needlessly removed a previously installed hplip driver ..3.10.6 .. and various dependencies were loaded with these errors ..
Now when I go to System > Administration > Printing
In troubleshooting there is no connection to CUPS server. The "Add" button is no longer green as before I started dabbling. No discovered printers.
How do I start again to get HP LaserJet 2100M connected (USB cable) .. and printing?
View 1 Replies
View Related
Mar 25, 2010
Where can I find driver and install it on backtrac4 for hp laserjet 6l and scenjet 2400?
View 1 Replies
View Related
Jul 2, 2010
I have a hp p1102w laserjet printer that works in windows. However after connecting it through Suse Linux 11.2 it is recognized and the printer name is showing but there is no driver for the printer. This is a usb connection. I have an 1100a laserjet connected that works but it is a parallel port.
Any suggestions? I haven't been able to find any special drivers on the web.
jim
View 3 Replies
View Related
Nov 2, 2009
Inherited an old Laserjet 6P that was working fine XP. No matter which printer driver I use all I get are pages and pages of garbage during the test print. I have tried the hplip, gimp, ljet4 drivers without success. I have tried sending text files from the command line as well (cat /etc/passwd > /dev/lp0) with the same result.
Fedora 11 64
cups 1.4
hplip-3.9
hpijs-3.9
Anyone using this printer with cups 1.4? Any ideas which driver to use?
View 4 Replies
View Related
