Ubuntu Networking :: Wireless And Lan Driver Kernel Module?
May 1, 2010what is name of modules in kernel for wireless and lan driver ?
View 1 Replies
ADVERTISEMENT
General :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedCentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module
Feb 20, 2010I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Ubuntu Networking :: Wireless Driver Broken After Kernel Update
Oct 1, 2010I just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko
i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format
I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?
Software :: Audio Driver Install - ERROR - NVIDIA Kernel Module Was Not Created
May 29, 2010I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
OpenSUSE Wireless :: Intel 5300 Chipset On 11.0 - Setup My Wireless Driver Under Kernel 2.6.25?
Feb 7, 2009I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies View RelatedOpenSUSE Wireless :: Cannot Find Map File. No Module Symbols Loaded - Kernel Modules Not Enabled
Aug 3, 2010Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
Ubuntu Networking :: Old Module In Newer Kernel?
Aug 23, 2010I got a engineering sample wifi card - Intel wimax 5350. This card work well with kernel 2.6.28-15-generic and earlier kernels.
However after kernel 2.6.28-16 , this card no longer support by newer kernel.
the error is "Unsupported EEPROM VER=0x21b < 0x21e CALIB=0x4 < 0x4"
I knew the reason is that card is a Engineering sample .. it should not get support in newer version kernels.
What i try to think is that "is it possible to replace old wifi module into the new wifi module in new kernel " and the system can also get works !?
Below is message of dmesg.
------------------ Kernel version : vmlinuz-2.6.28-15-generic
[ 11.683885] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.683888] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[Code]....
Ubuntu Networking :: Download The Proper Driver For Wifi Module?
May 22, 2011where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
CentOS 5 Networking :: Find Out Which Package (rpm) Contains The Ipg (network Driver) Module?
Mar 22, 2011How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedUbuntu Networking :: How To Add A Wireless Module
May 8, 2010I have a Toshiba Satellite 505D, and because of ACPI issues I had to compile a custom kernel. [URL] Everything works except the wireless is broken. My network card is a RTL8101E/RTL8102E. The driver is r8169. The new kernel does not load the wireless driver at boot up.At the terminal, I typed sudo modprobe r8169 to load the driver. Then I typed dmesg | grep -i r8169, and I got back the response
bob@bob-desktop:~$ lsmod | grep -i r8169
r8169 39454 0
mii 5237 1 r8169
This, I think, tells me the driver is there. However, when I type iwconfig, I get the response "no wireless connection"
Fedora Networking :: F12 2.6.32.14-127 Kernel Update Has No Rt2870 Module?
Jun 16, 2010since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies View RelatedNetworking :: Close A Kernel Module Network Socket?
Feb 10, 2010I opened a socket with sock_create()... bind() listen() accept().
Then, the far end closes the connection.
I want to close the near end, so I can re-open for the next connection.
But there is no close(), and sock_release() crashes the kernel.
Ubuntu Networking :: Mobile Broadband Driver And Wireless Driver Disable After Rebooting 9.04!?
Jun 21, 2010It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedUbuntu Networking :: Uninstall/Remove Old Wireless Driver To Make Way For New Driver - RTL8191SE?
Jun 21, 2010How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Debian Configuration :: Install Wireless Driver Not Included With Kernel?
Jun 16, 2011I'm running Debian wheezy on a Toshiba NB505 and I've noticed that the wireless connectivity can be painfully slow at times. I know it's not our home network because my desktop flies (running Windows).Currently, I have the driver from this guide installed. I went to Realtek's site to download the latest driver for this wireless card (RTL8188CE, the Linux/UNIX version) thinking maybe this more up-to-date driver would operate better than the one used in the guide above.Is there a possible way to install this driver, or should I just stick with the current driver I'm using from the guide above?
View 11 Replies View RelatedOpenSUSE Wireless :: Broadcom Wi-Fi Driver Working Only With Kernel-default
Sep 15, 2011Broadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies View RelatedUbuntu Networking :: Compatibility Between Routers And Built-in Wireless Module?
Sep 2, 2010I was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies View RelatedUbuntu Networking :: HP Dm 1-3025dx \ Compile A Module To Get The Wireless To Work?
Jul 24, 2011This is solved go to page #2 for instructionshis link will help show my netbook wireless situation:http://wontek.com/laptops/laptops/hp...-3025dx-reviewA quick read of the article says I need to compile a module to get the wireless to work... ??? Now I'm lost... can anyone point me in the right direction to compile a module?? and what exactly would that be doing???I believe I need this wireless driver: Ralink 2011 802.11 b/g/n WiFi Adaptercomputer: HP dm 1-3025dxOS: Ubuntu 10.04 Netbook
View 9 Replies View RelatedHardware :: USB Generic Serial Driver, And FTDI Single Port Driver As A Module, But It Still Isn't Getting Recognized?
Feb 4, 2011My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
View 5 Replies View RelatedUbuntu :: VirtualBox Kernel Module Breaks After Each Kernel Update?
Jan 6, 2010I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedOpenSUSE :: Kernel Module / Building VirtualBox Guest Additions Kernel Modules - Failed?
Feb 10, 2010I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
Debian Configuration :: Nvidia Kernel Module With Custom Kernel
Jan 24, 2010I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedUbuntu Networking :: Get PCtel Modem Driver For Kernel 2.6.28?
Jan 30, 2010a link to a website where I can get PCtel modem driver for kernel 2.6.28
View 1 Replies View RelatedUbuntu Networking :: Kernel Update Broke The Network Driver
Dec 23, 2010I managed to get my Linksys AE1000 USB wireless adapter to work on Unbuntu 10.04 LTS.but recently I updated the kernel to 2.6.32-26 and when i rebooted I logged on to see my wireless connection was not working.even worse, I can't fn the links i had that showed me how to install it in the first place, its about the fact that the new kernel uses a different usb setup(probably incorrect, let me know it its incorrect). its an issue that the hacked driver isnt compatible with the new kernel release, how can i revert to the older version that it did work on? i'm using a RALinkTech driver [URL]
View 3 Replies View RelatedUbuntu Networking :: Kernel Headers In Order To Install NIC Driver?
Jul 8, 2011I am running Ubuntu 11.04 with a Dlink DGE-530T NIC. My browsing in Ubuntu on ALL browsers is horribly slow. It works perfectly fine on windows and other PCs on the LAN. So I know for sure my router and my internet line is fine.I figured it could be a problem with my NIC drivers and decided to install the drivers from the CD. (All this while it was running on the default drivers that ship with Ubuntu). I'm trying to install the sk98lin drivers and my understanding of the kernel so far is still very weak. When I try to run the install.sh script it gives me an error saying :
Code:
Create tmp dir (/tmp/Sk98IknhDHEiLKnkWUSoYMTLi) [ OK ]
Check user id (0) [ OK ]
Check kernel version (2.6.38-8-generic) [ OK ]
Check kernel symbol file (/proc/kallsyms) [ OK ]
Check kernel type (SMP) [ OK ]
Check number of CPUs (2)
[Code]...
But the installation script is still not able to find it. I tried searching a few threads on google but wasn't able to make too much sense of whats going on because of my lack of understanding of the linux kernel.
Ubuntu Networking :: RTL8187L Updated Driver For Kernel 2.6.32/2.6.31 For ALFA AWUS036H
Jan 5, 2010i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.
To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........
Ubuntu Networking :: 2.6.35-24-generic Kernel Update Breaks Broadcom STA Driver
Dec 29, 2010I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
