I'm trying to compile a correct driver module for my graphics adapter "Nvidia Riva TNT2 M64". I visited the website "http://www.nvidia.com/object/linux_display_archive.html" and I downloaded the file "NVIDIA-Linux-x86-71.86.13-pkg1.run".to start installation I used the following commands:/sbin/init 3 --> to close the X rversh ~/NVIDIA-Linux-x86-71.86.13-pkg1.run
View 10 RepliesI think the problems are connected to the ATI drivers I've installed. I used the ones I got off of the ATI graphics driver repository specifically for OpenSuse. I would like to try the latest drivers off ATI's website again. I understand they are much more recent than the ones in the repository. The first time I tried them they didn't work, though they have worked in the past for me on a previous incarnation of this system. Do I have to uninstall the current drivers first? If so, how do I be certain I have uninstalled all that is necessary since I didn't keep track of the details in the first place? I can find some of them using the search function but perhaps not all. I would imagine there is a way to do that using YaST since I got everything off that one repository.
which option in the ATI graphics driver installer (ati-driver-installer-10-4-x86.x86_6.run) should I use? I'm using 11.2-64 on an Intel based system. Will the 32 bit drivers work on a 64 system? As I noted, the automatic option doesn't work for me. From reading some of the other posts here it seems perhaps I should start in level 3 and use the cli from there. That's not what I did before. Or should I try the latest 11.3 milestone since that seems to have better graphics card support?
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedI have just had to install CentOS 5.6 on a family members computer, as they lost there Windows XP key. Anyway, I am needing to install a new nvidia graphics driver. I found a howto on this forum for 5.2 [URL]
View 5 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI have installed gspca module in this way:
apt-get install build-essential linux-headers-$(uname -r)
apt-get install gspca-source
cd /usr/src
[code]...
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View RelatedHow To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I would like to know whether an updated print driver has successfully replaced a previously installed driver.
I have a late model Lexmark Prestige Pro805 printer. Lexmark supplies a Linux driver which you download. No drivers appear on the Ubuntu Add Printer list. The Lexmark download also installs utilities, etc. Some stuff appears installed in synaptic. I don't know if uninstalling these only uninstalls the applications and not the actual driver. For some reason, I have had issues recently with this printer malfunctioning frequently with my Linux machines over wifi. They have pushed new firmware down to the printer, and this may be a cause. There is also newer Linux print drivers which I installed, but I do not have a clue as to whether the new drivers are actually in use. On a windows machine I would have uninstalled the printer prior to re-installation. Clueless how to accomplish the same on Ubuntu.
How do I make sure the newest drivers are in use?
My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
View 5 Replies View RelatedI have intel GMA 4500M graphic card. In synaptic package manager I found out that there are a bunch of installed packages for nvidia and ATI. I was wondering if I can delete this files since i have INTEL graphic card. Any recommendations for uninstalling unneeded files?
View 9 Replies View RelatedI'm new to Ubuntu and I face a problem with my wlan my machine is Amilo li1818 I've installed sis163u vista driver, later I knew I must install sis163u XP driver not vista so, I need a help to fix this wrong.
View 4 Replies View RelatedI installed the proprietary ATI graphics driver from the AMD website(i did not install it using the additional drivers tool in the administration menu) and i don't know how to uninstall it. how do i do this?
View 3 Replies View RelatedA driver was installed however it is the wrong one. How do i uninstall it?
View 3 Replies View RelatedI installed this drivers from Nvidia's site. How to completely remove every traces of this driver?
View 5 Replies View Relatedhow to uninstall a video driver from Ubuntu 10.04?
View 1 Replies View RelatedThe last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
i downloaded the 11.4 ATI driver from their website. Then, i installed the driver using .RUN file. After installation, my graphics became worst and i cannot enable any effects. i went to system-preference...There were 4 ATI options (2 for the new one, 2 for the older one). i wanted to remove the newly installed 11.4.i went to additional driver and unistall the driver from there. but it uninstalll the older one. The 11.4 is still there in the preference.how to remove this driver i installed from RUN installer?
View 3 Replies View RelatedI want to know how to uninstall the bcm4312 wireless driver from my ubuntu 10,04.
View 1 Replies View RelatedI just installed a new driver from the Realtek site for my wireless chip, and it broke my system. Ubuntu won't boot in normal mode or recovery mode, and I'm sincerely hoping beyond all hope that I can avoid reinstalling the system I just got working yesterday.
At my connection speed, it will take about two days to download all of the packages I use. Is there any way to get rid of this driver and restore my system back to how it was... about twenty minutes before I posted this, without booting in the system?
Long ago (Back in the Intrepid Ibex days) I ran a manual upgrade of NVIDIA drivers from NVIDIA's website, in an attempt to get Wine running better on my system. Now every time I run upgrade manager, this message (or something similar) pops up twice every time I run upgrade manager:Code:The system has detected an obsolete NVIDIA driver in your system.Please install nvidia-glx-185 at the end of the installation with the following command:sudo apt-get install nvidia-glx-185The removal of other NVIDIA drivers will be dealt with automatically.I actually have nvidia's 190 drivers installed, so the error message is a bit of a misnomer.This message has been persistent with every upgrade, and appeared many times during the Karmic upgrade.
Now I understand when I did this originally every time I get a kernel upgrade and rebooted I'd need to reinstall NVIDIA's drivers. But ever since my Karmic upgrade, things seem to be a bigger hassle than normal.. The system almost locks up after reboot. Compiz now seems crippled and I've disabled it just to get a decent framerate.What I'd really like to do is go back to Karmic's NVIDIA drivers and not have to deal with update problems anymore.However, when I attempt to reinstall Karmic's NVIDIA drivers, I just can't seem to make this error message go away or get the drivers to work. I end up frustrated an hour later, reinstalling NVIDIA's drivers because something is broken and I just can't get jaunty's drivers working at all.
I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu.
I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck.
I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...
I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers.
Do you have any idea how to do it?
i'm trying to compile a driver module on ubuntu 10.10 . initially i was getting a lot of include file errors. but then when i added the include path. but after doing that i was getting a series of errors which i have no idea how to solve and it wont fit in one page. i've followed the same way how it is given in the tutorials online but still i'm not able to get it done. Is there any simple method to do this? is there something that i shouldn't do.
View 9 Replies View RelatedI've installed Centos 5.0 in my system, and I want to know how to un-install an update or package in Centos via Command Line ?
View 1 Replies View RelatedI have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?
INFO:Installation is being performed on the RedHat Linux distribution.
DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2
[Code]...
I've manually installed the latest NVIDIA display drivers from the website (newer than the restricted driver package that came with 9.10). When there is a new Linux kernel, or a newer Ubuntu version, will I need to uninstall that driver before upgrading? Will having this driver cause any special installation issues during upgrade (such as the need to reinstall the driver after upgrading)? I am using 9.10 through Wubi.
View 1 Replies View RelatedI am installed Debian 5.0.5 with kernel 2.6.x.
I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Kernel modules: e1000e
I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.
So, under lsmod I see e1000e loaded: