Here is my result from lspci |grep ther
[root@ast ~]# lspci |grep ther
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network Connection
01:00.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
I have noticed that my 1st ethernet which is Intel is not install yet in my system, there is no (rev number) how can i install my Intel LAN (built-in)
I have an issue with the DHCP clients in a lab environment I am building. The lab is in a dns subdomain but the clients should be able to resolve any machine in the lab subdomain or the parent by using just the hostname. According to everything I have read, the client resolver should do this automagically, trying first the naked hostname, then the FQDN, then walking up the tree of parent domains. But it doesn't.
So I thought I'd just have the dhcp server set the domain search list to include both the local and parent domain. But adding "option domain-search" to dhcpd.conf causes dhcpd to fail on start up. Does the current version of dhcpd in CentOS 5.3 really not support this option?
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
I'm trying to rebuild a .src.rpm to produce a debuginfo rpm but one is not being built. The normal .rpm builds just fine.
I have redhat-rpm-config installed, and the following is in my .rpmmacros:
%_topdir /home/kerrg/buildroot
%_toppath /home/kerrg/buildroot/tmp
%_signature gpg
[Code].....
I'm very new to CENTOS here. Just wondering if there's any built-in email capability in CENT-OS 5?
View 10 Replies View RelatedWe're planning on getting computers with built-in Agere et131x NICs, and were wondering if these would be automatically detected/installed upon installing CentOS 5.3 ?
View 4 Replies View RelatedCan anyone recommend a pre-built Core i7 desktop on which CentOS 5 can be easily installed ? It will not be used for gaming. We are considering the Aspire M5811 and the Vostro 430, however I heard that there is an RHEL bug with the NIC on the latter.
View 1 Replies View RelatedI install php in my centos 5.5 , but when I use yum install krb5 gcc-g77 libpng10 libpng10-devel I get the messages. No package available. The centos it's don't support these package?
View 2 Replies View RelatedI downloaded the binaries, and changed file permission to execute. When I double click on it, it asks me if I want to run it in a terminal, it starts out by giving me a message about looking for a component, and then the terminal closes, and nothing else happens. Is Netbeans not supported under CentOS 5.3?
View 2 Replies View RelatedI am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies View RelatedWhere I may get officially supported list of packages?
or it is the same as: #yum list ?
The situation: computer based on Asus P6T motherboard. Two RAIDS:
- 'boot', on motherboard built-in RAID controller (CentOS 5.5 installed on this RAID)
- 'data' on 3dware RAID card
At one moment a CPU fan fails and the system halts. After the fan is replaced, BIOS informs it's reset and all the inner controller data are forgotten. After I switch it to 'RAID' mode, it remembers it was a mirror raid (RAID 1) installed, but the file system on it is completely trashed.
The 'data' RAID run by external controller isn't affected by the system failure. Three questions:
- is it worth trying to install OS on the rebuilt 'boot' RAID once again? Looks like if BIOS settings are lost for some reason, there's chance of completely losing RAID data
- has someone encountered similar problem with built-in RAID nd was it possible to recover data?
- will the software RAID be worth creating instead of using hardware RAID to replace the 'boot' drive?
Background info: Trying to get the i82975x module (drivers/edac/i82975x normally) on CentOS 5.4I'm using the latest stock kernel. I was trying to get edac monitoring working when I noticed that I couldn't find the i82975x module. I downloaded the full kernel source and it's not an option to enable. I realize it's a older kernel, but I noticed i5400 edac support was there, which is a newer chipset.
View 1 Replies View RelatedI am having a problem running CentOS 5.4 in VMware which have appeared with the following error.
View 4 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL]. The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 4 Replies View RelatedI have a several-year-old Logitech webcam, device ID 046d:09a1, which is not currently supported by the uvcvideo driver version 0.1.0 included in my 5.5 centosplus build. The uvcvideo site points to build instructions at the linuxtv.org site, which indicates one should be able to build modules for "vanilla kernels" 2.6.16 and higher. My attempts to compile from their source resulted in various layers of of errors, and I'm way out of my depth in figuring out the changes necessary to compile successfully.
My searches haven't yet turned up any detailed info about building these modules specifically for CentOS 5.5, so I was hoping someone here may have had experience doing this, and might be able to steer me in the right direction.
Alternatively, are there any plans on the horizon to update uvcvideo to a version greater than 0.1.0 in future kernel updates?
My recent CENT OS install went very well. However the only thing missing is wireless support for my modest FR-300USB Wireless adapter. Since I do not have the expertise to create a driver I need to know where I can find what wireless adapters are supported.
View 1 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL] The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 9 Replies View Relatedi am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.
View 6 Replies View RelatedI am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are
- Intel Centrino Advanced-N 6205 802.11a/b/g/n
- Intel Centrino Ultimate-N 6300 802.11a/b/g/n
- Dell Wireless 1501 802.11b/g/n
- Dell Wireless 1530 802.11a/g/n
If any one has experience with those cards being supported let me know, or if you know where i can find the drivers for them that'd rock too.
I would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedThe motherboard is an L7VMM2 Rev 1.1Initially everything was running smoothly, then I brought it upstairs and everything just failed. The computer would hang right before the POST memory check, and after a few reboots it would do the memory check and reboot. So, I opened it up and switched the RAM around thinking it may have been a BIOS bug or a loos connection and it seemed to work. Now it boots into 10.04 perfectly and is blazing fast for an old computer. THe only problem now is that according to ubuntu, my ethernet controller is non-existent. It doesn't show up in lspci, dmesg and the only thing in ifconfig is the lo interface. It will however recognize the USB interfaces. I upgraded to linux 2.6.2.32-22-generic #33 but that didn't help the issue any. Now I'm stuck, and running out of ideas
View 2 Replies View RelatedI have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.
View 1 Replies View RelatedI have an old T30 that has an incompatible wireless card with my network. How can I disable the builtin wireless card while allowing my USB Linksys card to fully function?I can't figure out how to have one run while disabling the other.
View 4 Replies View RelatedRunning 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View RelatedI've seen many posts about setting up VPN's but my doubt goes further. I just need access to the local network of my office from a Windows XP (which of course is outside the LAN). I would like this PC to have access to the whole LAN, but what I really need is it to access to an Ubuntu Server (e.g. 192.168.0.10). The router is a Netgear DG834, which has a built in VPN functionality. So, is it enough if I set it up? Do I need to install any VPN server in Ubuntu? What if I want to access to another computer in the LAN? Where should I start?
View 4 Replies View RelatedOk so I've been all over Google trying to find an answer as to why my MPD server won't properly output over httpd. When I try to connect to it from any source, it gives me a "404:Entity Not Found" error. There hasn't been any useful info out there to solve this problem. Help please! Attached is my mpd.conf file. All my permissions and firewalls are set up properly AFAIK.
View 5 Replies View RelatedI was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies View Related