I install php in my centos 5.5 , but when I use yum install krb5 gcc-g77 libpng10 libpng10-devel I get the messages. No package available. The centos it's don't support these package?
View 2 RepliesI downloaded the binaries, and changed file permission to execute. When I double click on it, it asks me if I want to run it in a terminal, it starts out by giving me a message about looking for a component, and then the terminal closes, and nothing else happens. Is Netbeans not supported under CentOS 5.3?
View 2 Replies View RelatedHere is my result from lspci |grep ther
[root@ast ~]# lspci |grep ther
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network Connection
01:00.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
I have noticed that my 1st ethernet which is Intel is not install yet in my system, there is no (rev number) how can i install my Intel LAN (built-in)
I am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
I was building yesterday the boost-1.45.0 RPM package for CentOS 5.5.
View 3 Replies View RelatedI need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies View RelatedWhere I may get officially supported list of packages?
or it is the same as: #yum list ?
Background info: Trying to get the i82975x module (drivers/edac/i82975x normally) on CentOS 5.4I'm using the latest stock kernel. I was trying to get edac monitoring working when I noticed that I couldn't find the i82975x module. I downloaded the full kernel source and it's not an option to enable. I realize it's a older kernel, but I noticed i5400 edac support was there, which is a newer chipset.
View 1 Replies View RelatedI am having a problem running CentOS 5.4 in VMware which have appeared with the following error.
View 4 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL]. The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 4 Replies View RelatedI have a several-year-old Logitech webcam, device ID 046d:09a1, which is not currently supported by the uvcvideo driver version 0.1.0 included in my 5.5 centosplus build. The uvcvideo site points to build instructions at the linuxtv.org site, which indicates one should be able to build modules for "vanilla kernels" 2.6.16 and higher. My attempts to compile from their source resulted in various layers of of errors, and I'm way out of my depth in figuring out the changes necessary to compile successfully.
My searches haven't yet turned up any detailed info about building these modules specifically for CentOS 5.5, so I was hoping someone here may have had experience doing this, and might be able to steer me in the right direction.
Alternatively, are there any plans on the horizon to update uvcvideo to a version greater than 0.1.0 in future kernel updates?
My recent CENT OS install went very well. However the only thing missing is wireless support for my modest FR-300USB Wireless adapter. Since I do not have the expertise to create a driver I need to know where I can find what wireless adapters are supported.
View 1 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL] The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 9 Replies View Relatedi am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.
View 6 Replies View RelatedI have an issue with the DHCP clients in a lab environment I am building. The lab is in a dns subdomain but the clients should be able to resolve any machine in the lab subdomain or the parent by using just the hostname. According to everything I have read, the client resolver should do this automagically, trying first the naked hostname, then the FQDN, then walking up the tree of parent domains. But it doesn't.
So I thought I'd just have the dhcp server set the domain search list to include both the local and parent domain. But adding "option domain-search" to dhcpd.conf causes dhcpd to fail on start up. Does the current version of dhcpd in CentOS 5.3 really not support this option?
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are
- Intel Centrino Advanced-N 6205 802.11a/b/g/n
- Intel Centrino Ultimate-N 6300 802.11a/b/g/n
- Dell Wireless 1501 802.11b/g/n
- Dell Wireless 1530 802.11a/g/n
If any one has experience with those cards being supported let me know, or if you know where i can find the drivers for them that'd rock too.
I would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedWhy does centos-release-notes have any dependancies ?
I can see no reason why centos-relese-notes should depend on centos-release when I try "yum erase centos-release-notes" I am told there are 72 dependancies including completely irrelevant packages such as tar all because of this unnecessary dependancy.
The centos-release-notes package simply contains a bunch of text/html files that nothing else relies upon, so why the dependancies ?
I am trying to see if there is an authbind equivalent or authbind package for CentOS/RHEL? x If so, where can I get more info and download it? It seems to be only available for Debian and Ubuntu.
View 3 Replies View RelatedError installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
Today, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies View RelatedIs there an RPM package for mpfr?
View 1 Replies View RelatedI'm trying to figure out how to retrieve SNORT from a repository and I'm stuck. How can I find the latest version and install it?
View 4 Replies View RelatedI am using CentOS5.5 and I want to install few packages through yum.
like gnome-libs,XFree-libs etc. But when I run yum install gnome-libs it gives no
package available.
how to update yum to make these package available?
I am new user for centos. I dun my installation (centos 5) without GUI. I type the command yum groupinstall "GUI", yum groupinstall "XFCE-4.4", yum groupinstall "GUI", yum groupinstall "X11", and so. But the System says no packages available. So what can I do.
View 10 Replies View RelatedI've try to install vlc via Yum command..... but said that there isn't package. What can I do for install vlc (and this is the same thing for Firefox .....)
Here the result:
[root@localhost Bruno]# yum install vlc
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* addons: it.centos.contactlab.it
* base: it.centos.contactlab.it
* extras: ftp.plusline.de
* updates: centos.de-mirror-server.de
Setting up Install Process
No package vlc available.
Nothing to do
I've also tru to update Yum ..... same answer ......
[root@localhost Bruno]# yum update
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* addons: it.centos.contactlab.it
* base: it.centos.contactlab.it
* extras: ftp.plusline.de
* updates: centos.de-mirror-server.de
Setting up Update Process
No Packages marked for Update
On my LAMP server (recently installed, latest CentOS) i want to use php-mssql to connect to a remote MSSQL server. Therefore i need php-mssql. If i run "yum install php-mssql" it tells me "No package php-mssql available.".
On a older installation (2 years old, but up2date) i had no problem installing php-mssql. I cant tell the difference. I've read this tread:
[URL]
Also "yum install --enablerepo=extras php-mssql" didnt helped me.
I'm looking for a package rpm for httpd 2.2.19 and the only repository I have found so far is cent.alt.ru repository. Any guidance/advice on using this repository? Or know of any trusted repositories with httpd 2.2.19?
View 7 Replies View Related