CentOS 5 Hardware :: Dell Monitor 1909W Is Not Supported During Install
Feb 24, 2010
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
View 2 Replies
ADVERTISEMENT
Feb 24, 2010
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying " The current input timing is not supported by the monitor display.
Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
View 2 Replies
View Related
Jan 13, 2011
Brand new Dell XPS 15 laptop.
NVIDIA GeForce GT 420M graphics card with Optimus.
15.6HDF TLF LCD L501X screen.
Centos 5.5 64 bit, text install.
I downloaded and install the NVIDIA graphics driver NVIDIA-Linux-x86_64-260.19.29.run When I run system-config-display the display configuration appears but is very, very faint. Increasing screen brightness has no effect.
View 2 Replies
View Related
Nov 23, 2010
I have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
View 7 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Feb 25, 2009
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
View 5 Replies
View Related
Apr 4, 2009
how install Suse 9.3 on Dell server PowerEdge 2400 with a craizy raid controller: PERC 2/DC? I've tried to install suse and it looking for the driver of that raid controller. I've google it but with no success. I belived that contoller is not any more supported by suse.
View 1 Replies
View Related
Apr 22, 2010
I was running Ubuntu 8.10 on what used to be a server & is now serving as a stand-alone Ubuntu machine. It's got an MSI motherboard with a Pentium 4 3.2 Ghz processor & 2 Gig RAM. The video card has DVI & VGA outputs & this is where the problem begins. The monitor is a Gateway FPD 1500 1024x768 flat panel & originally appeared not to be supported by Ubuntu but I discovered if I simultainously connected both the flat panel via DVI and my shared VGA monitor (the VGA monitor serves another Linux box and an old WIN 98 machine via a switching box) I could get the display to first show on the VGA and after login it would appear properly on both. But as support for 8.10 is ending I upgraded to 9.10 via the update manager.
Now if I try to boot up using either the DVI Gateway flan panel alone or with it and the VGA connected, the machines hangs after login. However, if I disconnect the the DVI Gatteway monitor, the machine boots normally. Obviously, the necessary driver was removed during the upgrade but I can't find a Ubuntu driver for this monitor & connection type, does this mean I am stuck with it like this? I would prefer to use the flat panel as the picture is easier on the eyes and the VGA monitor is needed for other machines. I also tried a DVI to VGA adaptor and it wouldn't work meaning the monitor is DVI only.
View 1 Replies
View Related
Mar 11, 2010
I am having issues installing Centos on a Dell Poweredge 1950. I have tried 5.3 and 5.4, and the text only install. The error I get is when I select what keyboard layout to use. An error window pops up and says "Assertion ((C * heads + H) * sector + S == A) at dos.c:624 in function probe_partition_for_geom() failed " I can click ignore and cancel but it instantly pops back up. I have tried to look up the error but can't find any information on it.
View 4 Replies
View Related
Mar 27, 2010
I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time).
Specs:
Acer X203w monitor
Radeon 9600 Pro Video card
Linux Mint 8 (Helena)
Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor)
Refresh Rate 60hz
[Code]...
I just had it happen again. I tried unplugging the DVI cable from the back of the computer and then plugging it back in. The monitor then displayed the desktop properly. I'm not sure if that makes a difference or not in what I may need to change settings-wise.
View 1 Replies
View Related
Nov 6, 2009
I am trying to install Centos 5.3 x64_64 on old DELL server
PE 2850 with RAID 1 & 5 voluomes ON PERC 4/DC DUAL CHANNEL RAID CARD
Install can not see Raid Volumes
The server can still boot with the old OS RH EL 2x and RAID and Raid volumes are fine
View 6 Replies
View Related
Feb 10, 2010
I am trying to get a understanding of how to install a RAID 1 on a Dell Power Edge server.
HARDWARE:
2 - 16gig SCSI dives
1 - 36gig SCSI drive
I have read through some documentation found online and at centos.org but still having problems.
get this accomplished keeping in mind this is my first go at using RAID system.
View 4 Replies
View Related
Oct 4, 2010
I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.
The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?
View 2 Replies
View Related
Jul 28, 2010
I have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file:
rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies:
libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64
libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
View 1 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Jul 28, 2010
How do get Ubuntu to recognize a monitor? I am not able to change resolution which is very annoying. The page is too big on the monitor so I have to scroll at everything I read.
View 4 Replies
View Related
Jun 7, 2010
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
View 6 Replies
View Related
Aug 5, 2010
The 14" (pretty sure of the size) LCD monitor is hooked up with "digital input" (not the VGA or whatever). I tend to use the console (i.e. ttyX) more than X windows, and it is extremely slow refreshing. A concrete example is opening a man page, or cat-ing a file go so slow it takes a second or 2 for them to fully display.
Is this a video driver issue? Here are some stats:
Code:
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev
[Code].....
View 2 Replies
View Related
Aug 1, 2011
I have a dell monitor, E153FPf, with an intel chipset 865G. I just changed from Debian to Open Suse 11.4. In Debian, everything worked fine. However, with Suse, every time I open a new window in Gnome, the screen will flash at about a 1 Hz rate, showing the new window, and then immediately revert to the previously displayed window.
If I change to a different workspace, and then change back again, the display works properly . . . until I open or close a new application window.I made sure YaST2 had the correct refresh and resolution; I downloaded and installed the latest Intel drivers, I enabled the correct horizontal and vertical refresh rates in /etc/X11/xorg.conf.d/50-Monitor.conf - all to no avail. I have searched around for answers, but most of the issues seem to be with monitors not working at all - not new or closed applications not refreshing the screen properly.
View 3 Replies
View Related
Jan 24, 2010
I am planning on buying a DELL Monitor for my desktop. Now, I would like to have one which has an in-built camera. Also, my operating system is going to be Linux. Will I have any driver related issues for monitor as well as for the in-built camera.
View 1 Replies
View Related
Feb 24, 2010
I have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
View 1 Replies
View Related
Sep 11, 2010
I was on earlier 9.x version of ubuntu with following configuration working perfectly: IBM ThinkPad T60 with ATI Technologies Inc Radeon Mobility X1400 VGA graphics card (found it from lspci) With an external Dell 19" monitor attached to it. I upgraded yesterday to Ubuntu 10.4 LTS and now the Dell monitor screen keeps flickering all the time! I always work with an external bigger monitor attached to my laptop as working for long hours on the smaller screen of the laptop gives me headache. The frustrating point is, this setting was working perfectly until I was on Ubuntu 9.x, I upgraded to 10.04 LTS and this has stopped working.
View 4 Replies
View Related
May 26, 2011
We have Debian Squeeze and we've bought Dell ST2220T multi-touch monitor with USB interface. Has someone successfully get touch screen working? Which module (driver)?
View 1 Replies
View Related
May 11, 2011
I'm looking for a driver (module) for Dell ST2220T multi-touch monitor to get touch screen working.
View 5 Replies
View Related
May 9, 2010
I'm running OpenSuse 11.1 with a Dell Inspiron 6400. I just bought a Medion Multi-Touchscreen-Monitor cos they were going cheap at the local supermarket. It says the touchscreen works with Windoze 7 only, but I thought its worth a go as I have 30 days to try before taking it back.
The monitor output works fine. I had to adjust the resolution setting but that's okay. However, when I plug in the touchscreen usb lead I've no success yet. I tried all the touchscreen Vendor/Name options in Yast->Hardware->graphics card/monitor but to no avail.
My dmesg output is:
Quote:
usb 4-1: new full speed USB device using uhci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
usbhid: timeout initializing reports
[Code]....
View 3 Replies
View Related
Apr 6, 2010
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies
View Related
Oct 6, 2010
Installed fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
View 1 Replies
View Related
Jun 26, 2011
I have tried to follow the steps given in this thread: [URL]
I just can't get step 3 or 4 to work: svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk cd trunk
View 1 Replies
View Related
Aug 6, 2011
I have a Dell mini 10 netbook that I am trying to set up as a temporary HTPC. Using XP, I can send the video and audio over the HDMI connection, but when I attempt to do so from Ubuntu, there is not an option for a different monitor.
View 3 Replies
View Related
Nov 26, 2010
I install php in my centos 5.5 , but when I use yum install krb5 gcc-g77 libpng10 libpng10-devel I get the messages. No package available. The centos it's don't support these package?
View 2 Replies
View Related
