Background info: Trying to get the i82975x module (drivers/edac/i82975x normally) on CentOS 5.4I'm using the latest stock kernel. I was trying to get edac monitoring working when I noticed that I couldn't find the i82975x module. I downloaded the full kernel source and it's not an option to enable. I realize it's a older kernel, but I noticed i5400 edac support was there, which is a newer chipset.
View 1 RepliesI built this computer recently
AMD IIX6 1090T cpu
ASUS M4A89GTD PRO USB3 MB
2- 4GIG DDR3
1- 2GIG DDR3
OS DEBIAN SQUEEZE
I only recently started using and noticed thes errors.
I checked my system bios, ECC was not enabled because, when I setup mobo I selected system defaults instead of doing them manually. So I enabled them.
The message has not gone away.
I looked up the message and it shows in bug list.
[url]
[url]
1. Had I have enabled Ecc before installing Debian, would I be getting this message.
2.How do I apply patch.
3. I only have 3mem sticks instead of 4' should I take out the 3rd or add another?
Hey, im new to linux but i like it very much. recently built decent computer and put Mint 10 on it. every thing works fine but get a strange message after I install the driver for nvidia video card. Message is an edac error "device not found" E7xxx.? Not sure of any of it. System still works fine. Graphics are working great. Also the linux mint boot screen changed to some generic looking screen that says Linux Mint 10 in an old dot matrix type format.
Here's what I have:
Tyan i7501 s2735
(2) 2.4 Xeon cpu's
320 gb seagate hd
2gb ram
8400 GS Geforce 512mb video card
I have a 'Rackable Systems' server with an HDAMA mobo - Dual CPU Opteron 250 2.4GHz with 2x memory modules per CPU. It seems to run fine, but it hangs every hour or so! I am running Ubuntu 64-bot 10.10, which is currently a beta release so I haven't discounted that as the problem yet, but suspect it unlikely. However, I am downloading 10.04 as I type...dmesg spits out lots of awful messages like these:
[ 1314.920127] EDAC MC1: CE - no information available: amd64_edacError Overflow
[ 1315.920047] Northbridge Error, node 0, core: 0
[ 1315.920060] ECC/ChipKill ECC error.
[ 1315.920066] EDAC amd64 MC0: CE ERROR_ADDRESS= 0x1484410
[ 1315.920082] EDAC MC0: CE page 0x1484, offset 0x410, grain 0, syndrome 0x11c1, row 0, channel 0, label "": amd64_edac
(there are variations on the node, core, address, offset an syndrome etc.)I have tried swapping CPUs over and running with only CPU.I have also swapped all the memory around in almost every permutation.Another worrying symptom is that when I run memtest86+ from a boot disk, it shows zero errors up until the point where the server turns itself off without warning - it hasn't yet completed the test...
I have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?
INFO:Installation is being performed on the RedHat Linux distribution.
DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2
[Code]...
I would like to enable XML-RPC module on my dedicated server with CentOs 2.2-3.2.el5 hosted on 1and1 server. How do I enable this module? What are the procedures?
View 1 Replies View RelatedI install php in my centos 5.5 , but when I use yum install krb5 gcc-g77 libpng10 libpng10-devel I get the messages. No package available. The centos it's don't support these package?
View 2 Replies View RelatedI downloaded the binaries, and changed file permission to execute. When I double click on it, it asks me if I want to run it in a terminal, it starts out by giving me a message about looking for a component, and then the terminal closes, and nothing else happens. Is Netbeans not supported under CentOS 5.3?
View 2 Replies View RelatedHere is my result from lspci |grep ther
[root@ast ~]# lspci |grep ther
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network Connection
01:00.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
I have noticed that my 1st ethernet which is Intel is not install yet in my system, there is no (rev number) how can i install my Intel LAN (built-in)
I am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies View RelatedWhere I may get officially supported list of packages?
or it is the same as: #yum list ?
I am having a problem running CentOS 5.4 in VMware which have appeared with the following error.
View 4 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL]. The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 4 Replies View RelatedI have a several-year-old Logitech webcam, device ID 046d:09a1, which is not currently supported by the uvcvideo driver version 0.1.0 included in my 5.5 centosplus build. The uvcvideo site points to build instructions at the linuxtv.org site, which indicates one should be able to build modules for "vanilla kernels" 2.6.16 and higher. My attempts to compile from their source resulted in various layers of of errors, and I'm way out of my depth in figuring out the changes necessary to compile successfully.
My searches haven't yet turned up any detailed info about building these modules specifically for CentOS 5.5, so I was hoping someone here may have had experience doing this, and might be able to steer me in the right direction.
Alternatively, are there any plans on the horizon to update uvcvideo to a version greater than 0.1.0 in future kernel updates?
My recent CENT OS install went very well. However the only thing missing is wireless support for my modest FR-300USB Wireless adapter. Since I do not have the expertise to create a driver I need to know where I can find what wireless adapters are supported.
View 1 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL] The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 9 Replies View Relatedi am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.
View 6 Replies View RelatedI have an issue with the DHCP clients in a lab environment I am building. The lab is in a dns subdomain but the clients should be able to resolve any machine in the lab subdomain or the parent by using just the hostname. According to everything I have read, the client resolver should do this automagically, trying first the naked hostname, then the FQDN, then walking up the tree of parent domains. But it doesn't.
So I thought I'd just have the dhcp server set the domain search list to include both the local and parent domain. But adding "option domain-search" to dhcpd.conf causes dhcpd to fail on start up. Does the current version of dhcpd in CentOS 5.3 really not support this option?
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are
- Intel Centrino Advanced-N 6205 802.11a/b/g/n
- Intel Centrino Ultimate-N 6300 802.11a/b/g/n
- Dell Wireless 1501 802.11b/g/n
- Dell Wireless 1530 802.11a/g/n
If any one has experience with those cards being supported let me know, or if you know where i can find the drivers for them that'd rock too.
I would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedI see that mod_proxy_html is not part of the standard repo - what's the best of installing/getting that module on CentOS?
View 5 Replies View RelatedI have installed tvtime in CentOS 5.5. I'm using a phillips tvtuner card saa7134. But when I modprobe saa7134, it says Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]# modprobe saa7134
FATAL: Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]#lspci | grep -i 'saa'
02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
I have installed CENTOS 5.3 on my machine and am running the new version of Subversion which comes bundled with Apache. I noticed in the httpd.conf file there is no module for PHP which is a problem. How do I install the PHP module for APACHE in Centos 5.3?
View 3 Replies View RelatedIn an effort to mount an NTFS partition, I'm following the tutorial here: [URL]
Since I didn't have rpmforge installed, I followed the directions here: [URL]
I'm fairly confident I followed both of these tutorials correctly. However, behold:
$ sudo /sbin/modprobe fuse
FATAL: Error inserting fuse (/lib/modules/2.6.18-128.7.1.el5/extra/fuse.ko): Invalid module format
$ uname -r
2.6.18-128.7.1.el5
I want to add the imap module into my php
View 1 Replies View RelatedI am having this problem everytime I execute the yum command: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named cElementTree
Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]
I installed openxenmanager without a problem. but when I tried to start it I got: ImportError: No module named gtkvnc
the start script is in python, and I am using python2.5 to run it. I already installed
gtk-gtk-vnc.i386 0.3.8-3.el5 installed
gtk-vnc.x86_64 0.3.8-3.el5 installed
gtk-vnc-python.x86_64 0.3.8-3.el5 installed
Note: when I use python2.4 I got another error and it skip the previous one, the error is: ImportError: No module named hashlib
and when I comment it the application is running but with errors.
I have CentOS 5.5 (Final Release) installed on my netbook. I am trying to configure vmware on this machine. When I run vmware-config.pl it goes smooth until it tries to build vmmon module. It gives me following error when it tries to build vmmon module:
Code:
Extracting the sources of the vmmon module.
Building the vmmon module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config10/vmmon-only'
[code]....