CentOS 5 Hardware :: Controller Supported By The Kernell, Plug And Store?
Jan 10, 2009
i am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.
View 6 Replies
ADVERTISEMENT
Oct 5, 2009
it says this at start of boot:memory for crash kernell (00x00 'or something like that') not within permisiable rangeotherwise no problems for now, ewerything runs fine.
View 4 Replies
View Related
Jun 18, 2010
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
View 2 Replies
View Related
Oct 29, 2010
I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release
centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5
[code]....
View 6 Replies
View Related
Jul 29, 2011
I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?
View 1 Replies
View Related
Apr 3, 2009
I have had a Supermicro X7DCL-3 motherboard based machine, running CentOS 5.2 x86_64, recently upgraded to 5.3.Strangely enough, although I must have installed the 5.2 using DVD disk, the running system does not show the DVD drive. The machine was not used very much so I noticed that only today, after the update. There is no trace of it in 'dmesg', thera are no /dev/cd* and/or /dev/dvd* devices. The IDE controller is IT8213 (as shown by 'lspci'). In 5.2 kernel (2.6.18-92.el5-x86_64) lspci says "unknown device". I have checked the /usr/src/kernels/*/.config files and both kernels (5.2 and 2.6.18-128.el5-x86_64 of 5.3) seam to have the support for that controller added into the kernel:CONFIG_BLK_DEV_IT821X=yAny idea why it is not working? The Supermicro has apparently noticed this also as their OS compatibility chart lists the IDE interface for that motherboard as supported up to RHEL 5.1 but not for 5.2.
View 2 Replies
View Related
Jul 22, 2009
I have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?
INFO:Installation is being performed on the RedHat Linux distribution.
DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2
[Code]...
View 4 Replies
View Related
Oct 15, 2009
My server is Centos 5.3 I have php 5.1.6. some of plug-ins does not work I have to upgrade it to 5.2.6.
To upgrade it I have to install a third party repositories.How can I protect my current php in case if the repository does not work I enable ( or role back) the Centos default php?
View 5 Replies
View Related
Dec 8, 2009
I have two students whose windows laptops are riddled with malware and not working properly. They want me to help them install Linux (which we use in school), but they are concerned about their iTunes.
Having avoided iPods as "defective by design", I know nothing about iTunes whatsoever. However I remember reading about DRM locking and such problems that have me concerned that I won't be able to do it.
Where does iTunes store its stuff?
Can I copy its data store to an external drive, and then into a linux home?
Then will it work on wine, or can another manager (rhythmbox etc) access the itunes data?
Alternatively, if I partition the drive and install linux, can rythmbox/wine/something access itunes data on the win partition?
Supposing they are buying music through iTunes, what will happen to that account?
Finally, one of them has an iphone. Does that work with linux?
Ironic that an apple application is blocking migration away from windows.
View 9 Replies
View Related
Jul 15, 2009
I tried to setup a Postfix system as VM Guest, in a single file image. So I want to store the mails on another hosts throught NFS mount. I got various errors when Postfix try to write to the NFS share. Anyone knows what's the correct setup for this? like file permission on the NFS?
View 1 Replies
View Related
Aug 5, 2011
I am running a server in Dell which has RAID1 and hot plug 2 disks. It's been running for a while, but I was thinking it may crash anytime. So got a spare one, and wanted to test it how it works.I have never done this before. Can I simply, on a running machine, unplug the Disk 2 and connect the new Disk there? (Without interrupting the service as a silent mode?) Or does it have to be shutdown first, and unplugged, reinstalling all software/centos/etc etc? How do you do this update? Also how do you know when you replaced the disk? Do you have anything special to monitor that disk 1 or disk 2 is end of life?
View 1 Replies
View Related
Sep 15, 2009
I want to add a new IDE controller, to the one I already have on board (I have only one). I disable the on board controller in order to boot the same disk using the new IDE controller.
The problem is that when I get to Grub it does not know where to boot from.
The system should boot from hd0,0 but it can't find it. I tried hd1, hd2 and hd3. None of them worked.
Do I need to edit Grub before installing the extra IDE controller?
View 10 Replies
View Related
Sep 11, 2009
How to configure centos 5.4 as a domain controller?
View 2 Replies
View Related
Oct 13, 2010
I have just installed a NEC 3.0 PCIe board in my CentOs 5 box, but the card is not recognised, and no drivers seem to be loaded for it. lspci says: USB Controller: NEC Corporation Unknown device 0194 (rev 03) The vendor says the board is supported on Linux kernels 2.6.16 and later. uname says my kernel is 2.6.18-194.17.1.el5
How do I get this device to be recognised, and drivers loaded for it?
View 19 Replies
View Related
Sep 15, 2010
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
View 4 Replies
View Related
Mar 19, 2009
I'm working on a new server and it has an Nvidia SATA array controller with 2 250Gb SATA drives configured in a hardware array. When the first screen comes up I'm entering the option Linux DD for it to prompt me for the drivers but nothing ever happens. The screen says that it's loading a SATA driver for about 15 minutes and then the screen clears and has a plus sign cursor on a black screen. What am I doing wrong? The only driver that came with the HP server are for Redhat 4 and 5 and SUSE, will any of those actually work?
View 7 Replies
View Related
Aug 4, 2009
I have an old IBM Xseries 300 server that i can use. So, i am trying to install Centos 5.3, but during the installation , no disk can be found. I have 2 disks (1+1 in mirror) connected to an IBM serveraid PCI card.
I installed Debian Lenny, and it recognize the card (so the disks) immediatly.
~# lspci | grep RAID
00:09.0 RAID bus controller: IBM ServeRAID Controller
~# dmesg | grep scsi -i
[ 1.527963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.092981] SCSI subsystem initialized
[Code]....
View 5 Replies
View Related
Aug 24, 2009
I have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
View 4 Replies
View Related
Jan 10, 2010
I have been trying for a few days to install CentOS 5.4 on an IBM x306 and I cannot get it to properly handle the Adaptec Embedded SATA HostRAID Controller. I have been working with Linux for a few years, but this is new territory for me. I typically use Debian-based distros, but I did some research on the IBM site and found out that RHEL is a supported OS for this machine. So, I decided to give Cent a try. I have some experience with Fedora, so it's not totally foreign to me.
Anyway, I'm a bit confused. Using the IBM RAID utility, I set up a mirrored pair of 1GB SATA HDDs. When I run the Cent installer, it sees the pair as a single array. I am able to partition the array and complete the install, but when I boot into the OS, it sees the drives as 2 separate devices, sda and sdb. I can pull either one of the drives and boot with a single disk, but it doesn't seem to behave as a mirrored pair. If I make changes on sda, they are not replicated to sdb. Also, I can't use the cli or GParted to format the existing space on the array. I get an error either way. I believe this is because Cent doesn't have a driver for the RAID controller, but I don't see why it would work in the installer, but not the installed OS.
My next approach was to start over and attempt to run "linux dd" at the start of the installation. I tried to find the driver for the controller on the IBM site so I could load it when prompted, but couldn't find a newer version than RHEL 4 Update 3 (I'm assuming this would coordinate with CentOS 4.3). I tried it anyway, but when I select the floppy during the setup, it tells me it's not for this version of CentOS. I read several times that there are .img files that might help me in the 'Images' directory of disk one, but I only see diskboot.img, minstg2.img, and stage2.img. I don't think any of these are what I'm looking for. I thought there was supposed to be a drvblock.img or driverdisk.img.
View 3 Replies
View Related
Mar 12, 2010
Does centos 5.4 support this?
product code: E10G41AT2
[url]
View 1 Replies
View Related
Sep 7, 2010
Running CentOS 5
System see the device with an lspci, yet will not load
Vendor:Device ID is 14e4:1691
Broadcom BCM57788 on board ethernet controller
Cannot find driver or anyone that seems to support it. Am I missing something?
This is in a Dell computer.
View 10 Replies
View Related
Nov 26, 2010
I install php in my centos 5.5 , but when I use yum install krb5 gcc-g77 libpng10 libpng10-devel I get the messages. No package available. The centos it's don't support these package?
View 2 Replies
View Related
Sep 29, 2009
On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
View 12 Replies
View Related
May 6, 2011
I'm running into problems adding the required schema for automount and ldap on Centos 5.6 (also tried Centos 5.3)In the last few days I was able to setup LDAP server and get client authentication working. I want to be able to automatically mount users home folders on logon and store the configuration in ldap.I've done the following so far
1) added include in /etc/openldap/slapd.conf to /etc/openldap/schema/redhat/autofs.schema
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/redhat/autofs.schema
View 4 Replies
View Related
Aug 11, 2009
I downloaded the binaries, and changed file permission to execute. When I double click on it, it asks me if I want to run it in a terminal, it starts out by giving me a message about looking for a component, and then the terminal closes, and nothing else happens. Is Netbeans not supported under CentOS 5.3?
View 2 Replies
View Related
Jan 22, 2010
Here is my result from lspci |grep ther
[root@ast ~]# lspci |grep ther
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network Connection
01:00.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
I have noticed that my 1st ethernet which is Intel is not install yet in my system, there is no (rev number) how can i install my Intel LAN (built-in)
View 6 Replies
View Related
Jun 22, 2010
I am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
View 7 Replies
View Related
Oct 4, 2010
I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.
The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?
View 2 Replies
View Related
Jan 27, 2011
Is it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:
Quote:
root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]....
View 14 Replies
View Related
Mar 31, 2011
I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.
I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:
View 5 Replies
View Related
