CentOS 5 Networking :: DHCP: Option Domain-search (119) Not Supported?
Oct 14, 2009
I have an issue with the DHCP clients in a lab environment I am building. The lab is in a dns subdomain but the clients should be able to resolve any machine in the lab subdomain or the parent by using just the hostname. According to everything I have read, the client resolver should do this automagically, trying first the naked hostname, then the FQDN, then walking up the tree of parent domains. But it doesn't.
So I thought I'd just have the dhcp server set the domain search list to include both the local and parent domain. But adding "option domain-search" to dhcpd.conf causes dhcpd to fail on start up. Does the current version of dhcpd in CentOS 5.3 really not support this option?
Ubuntu Server 9.10I want to set up my dhcp server to also be my DNS server so do I skip these lines or point them at the same server that the config file is on?
Following situation: I'm trying to make a network-installation of my rootserver with CentOS 5.4 x86_64. This server is hosted by 1and1 a company of the united internet group, which is a big player in europe. The network environment of 1and1 is providing classless static routes via dhcp by using the dhcp option 121. If i'm right anaconda does not support this dhcp option 121 and therefore does not "ask" for the routes. Without the routes configured the traffic does not get through and the network installation fails. An installation from fedora12 (anaconda 12.46) works without any problems.
Is there someone in the dev team that can patch or backport it?
I am having a problem getting a wireless network connection on my DELL laptop running CentOS 5. I have no problem getting a wireless connection when the laptop is booted in Windows XP. I also don't have a problem when booted under CentOS 5 and there is no authentication setup on the wireless router. I only have a problem when I setup authentication. The router wireless log shows the PC connectinng, authenticating, and succeeding authentication.I am using the Broadcom Hybrid-wl wireless driver.
has anyone tried to install Pinot the personal search engine in Maverick? I found the package it depending require package libtextcat0 and libtextcat-data, but once selected, many components of openoffice will be removed.Is this correct behaviour? Or Pinot is not longer supported by Ubuntu
I have an existing home network with fixed ip's. I'd like to connect a "dish network" HDTV box into the network but it can't use fixed ip's. So is it possible to use one of my computers and setup a DHCP subnetwork?
Assume I installed originally CentOS Desktop with IP receiving from DHCP server.Later I decided to assign a fixed IP to the local CentOS installation.How do I switch (permanently) the dynamic DHCP IP assignment to a fixed IP?
I have installed Centos 5 on a virtual machine (esx4i). I set it to obtain an IP address from the DHCP sever, which is a broadband router, it has been given an IP address of 10.10.11.159 the router is 10.10.11.1 but I can't ping the router and I can't get any access to the network! I have a SCO Openserver server on the same physical box and it works fine so I know the network card & cable is ok.
using the LDAP as storage of hostnames/IPs/MACs for the DHCP server on CentOS.Also once the IP is allocated via DHCP to the hosts,it would be useful to insert such host into the DNS. (BIND? dnsmasq?)I've found this link [URL] which deals with a patch for the ISC DHCP package, but I don't think this is actually up-to-date.
I have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes. 2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient Internet Systems Consortium DHCP Client V3.0.5-RedHat Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/
I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.
Here are the outputs for this card. uname -rmi 2.6.18-92.1.10.el5 x86_64 x86_64 lspci -m 04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')" 04:01.0 0200: 1186:4b01 (rev 11) lspci -vv 04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 121 Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at e800 [size=256] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data
How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.
I decided to take the plunge and change the existing static ip configuration for my home network to a dynamic (DHCP) configuration. The DHCP server in this new network config is my gt701-wg actiontec DSL modem.
I'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi == 2.6.18-194.3.1.el5 i686 i386 == END uname -rmi ==
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1. Eth0 : 192.168.1.3 Eth1 : 192.168.1.5
Here is the configurations files: == BEGIN uname -rmi == 2.6.18-194.17.4.el5 x86_64 x86_64 == END uname -rmi ==
== BEGIN rpm -q centos-release == centos-release-5-5.el5.centos == END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release == CentOS release 5.5 (Final) == END cat /etc/redhat-release ==
== BEGIN getenforce == Permissive == END getenforce ==
== BEGIN rpm -q yum rpm python == yum-3.2.22-26.el5.centos rpm-4.4.2.3-20.el5_5.1 python-2.4.3-27.el5 == END rpm -q yum rpm python == == BEGIN ifconfig -a == .....
I had something I think if very odd happen to one of my computers at work today, it appears to have spontaneously switched from having a static address set to getting its address by dhcp.this is a small office with a mix of mostly linux servers and desktops with a few stand alone windows computers, mostly notebooks. Most of the desktop computers get their address by dhcp, they all have NIS /NFS for remote mounted home directories (interchangeable desktops so anyone can log in at any desk). The particular desktop computer in question here has a shared printer on its parallel port, so has a static IP. Yesterday a UPS in the server rack died, after pulling it and plugging things back in and restarting the servers, it was easiest just to reboot all the desktops, everything came up ok including the desktop in question, and the printer did work.
Today I pulled the oversized UPS from this desktop to replace the dead one, and put a more appropriately sized one in its place, shut the servers down again, rebooted, etc,About an hour later someone tells me the printer is not working on the desktop, and after a lot of searching I find this desktop has the wrong IP address, I ran system-config-network and it showed the address was set to dhcp, I changed this back to the correct static IP and things seem to be working ok now.
I got a CentOS server setup as a dhcp server using dnsmasq. I followed this guide more or less: [URL] So, the problem seems to be concerning the DNS server on the clients. In windows I get the "limited connectivity" icon for the network, and when I select troubleshoot it says the DNS server does not respond. Issuing 'ipconfig /all' clearly shows the IP of the CentOS machine as the DNS server, which should be correct, yes?
ETH0 is working as WAN connection and that works great.. no problem with the WAN connection at all on the CentOS machine. ETH1 has the IP 192.168.0.1 and mask 255.255.255.0 When starting eth1, it sometimes says that it can't start eth1 because the IP 192.168.0.1 is already in use.. but that is most certainly not the case. Maybe there's some kind of issue here that messes with the DNS? What's mind boggling is that it works great on a linux machine (dhcp client) and on a windows xp machine. but it does not work on the windows 7 laptop and a vista laptop and a pda device.
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11 eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
I am going barking mad with this - I have forward mapping working fine, but my system simply refused to add in the reverse mapping.Anyway can someone with a clearer head and more knowledge have a look at my configs and see if they can point me in the right direction.I've setup the keys and permissions and they seem to be working, local UNIX file permissions are named.named and even 777Nothing seems to create reverse mappings - no PTR records etc.Weird (I am 99% there to blowing my stack and giving up after 4 days of buggering around).
I was just wondering if someone could tell me the best method to connect all my hardwares together to achieve better result.HARDWARES.Cable ModemNETGEAR ROUTERNETGEAR FS728TS Smart switchLINUX SERVER WITH 2NICS.I want my dhcp server to serve 3VLAN networks. I need someone to show me how to do this. What do I need to do. keep in mind, I want eth0 to be used for public address only while eth1 for LAN. DHCP will be on eth0, but I need LAN on eth1 to be relayed back to eth0. This is my school project.
I'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
