Ubuntu :: Virtualbox Unable To Detect USB Ports
Aug 13, 2011
I am running 11.04 with a dual boot of vista. I am also running virtualbox (downloaded from oracles site) I installed the extension pack from their website, I have added a new filter and I am in the user group but still virtualbox will not see the usb ports or the device plugged in. The reason for running virtualbox is if I can get the usb to work, I will then remove vista completely from my system and just virtualbox for the only two programmes that do not work in Ubuntu.
View 9 Replies
ADVERTISEMENT
Apr 4, 2010
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
View 2 Replies
View Related
Nov 22, 2010
I installed VirtualBox 3.2.10 running Windows XP Pro and I don't have Access to my USB Ports in XP.VirtualBox shows the ports but they are grayed out and XP device manager lists Intell 82801FB/FBM USB2 Enhanced Host Controller - 265CStandard OpenHCD USB ControllerUSB Root ControllerUSB Root Controllerunder device manager but when I click the USB Root Ports it shows nothing attached and says that there are 8 ports available in each HUB.If I plug in a device Windows does not detect a new device or report any kind of errors about USB devices and there are no yellow exclamation points under Device Manager.
View 3 Replies
View Related
Mar 13, 2010
I'm here to lend your support again. I just install "VirtualBox" in Fedora12, but would like to recognize USB ports, how can I do this?
View 5 Replies
View Related
Apr 16, 2010
I just set up Suse 11.1 64bit and installed Virtual Box 3.1.6. I had it running previously with no problems, however, this time I can't get it to recognize any USB ports. In fstab I entered the line
None /proc/bus/usb usbfs devgid=1000,devmode=664 0 0
and ran mount -a (no go)
I loaded Vmware Player and it uses the USB ports perfectly fine (go figure) I added to the "none" line auto,
busgid=1000,busmode=0775,devgid= etc.
Still a no go - vmware uses them no matter what I have in "fstab" what am I missing with Vbox?
View 4 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Oct 16, 2010
I have a simple home network with a windows and fedora clients. I'm running fedora 13, but I"m having problems connecting to the pc on certain ports from my windows pc. I can connect from windows to fedora using VNC, and even connect to my postgresql database. However, can not get connected to my Apache Tomcat or JBoss server. When I first installed the OS I went through and configured the firewall but have since disabled it (stopped service). However, I still can't get to the app/web servers.
View 7 Replies
View Related
Apr 22, 2011
So I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies
View Related
Sep 1, 2011
I have not been able to upgrade VirtualBox for a while now. I get the attached error
View 9 Replies
View Related
Mar 14, 2010
I have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies
View Related
Apr 6, 2010
I'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
View 8 Replies
View Related
May 8, 2010
im using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies
View Related
Jun 20, 2010
Ubuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
View 1 Replies
View Related
Aug 3, 2010
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
View 2 Replies
View Related
Sep 17, 2010
I'm running Karmic Koala on my laptop and I'm attempting to connect to my university's secure wireless network. I was directed here by the university's computer help websiteI've followed all the steps, but when I open the wireless network authentication applet and try to browse to my private key, I can't find it. The "chose your private key" window claims to be looking for "DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12)," and while my private key file shows up as a .p12 file when I open that location with my file browser, the file doesn't show up when I try and browse to it from the authentication applet. I've attached an image which shows the file in one window, but not in the other f clarification.
View 7 Replies
View Related
Jul 19, 2010
I have virtualbox installed under ubuntu 8.04 x64. The kernel got updated and since then I have to reboot the computer and choose previous kernel to use virtualbox. The reason is that I can't get a hold of the virtualbox module for 2.6.24-28 generic. When the kernel has been updated in the past I would just go into synaptic and select it, but this time it doesn't show and I've waited a while now... Tried searching for the package to no avail.
View 2 Replies
View Related
Jul 30, 2010
I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.
View 4 Replies
View Related
Nov 1, 2010
I am using VirtualBox and I installed the Guest additions successfully. Host F does not work as it is not the problem. The resolution under monitor is 800x600. I had the same problem in Fedora where I modified the xorg.conf however Ubuntu does not have the file located in /etc/X11/...
I tried adding it with the same xorg.conf from my Fedora Virtual machine but that screwed up my display and had to fix it from the terminal.
Not sure why Ubuntu 10 doesn't have an xorg.conf or how to fix the display if not from xorg.conf?
View 2 Replies
View Related
Dec 23, 2010
Running Ubuntu 10.10 within virtualbox on ubuntu 9.10. Noticed an odd item that was once an peculiar and has now become an annoyance.If I leave my computer for, say 5 minutes, and I bring virtualbox back up, i am presented with a login screen. However, i can't login as my keyboard does not work. Mouse works fine. Can't login, so I have to close out.
I looked at my power management settings within 10.10 and everything is off. no power saving. Ubuntu 9.10 has power management, but these do not appear to affect virtualbox. I have a 15 minute monitor turnoff, with disks running until 2 hours. If I leave for 5 minutes, monitor is on, but Ubuntu 10.10 within virtualbox wants a login.
View 2 Replies
View Related
Mar 30, 2010
Ubuntu wont detect my screen (mag bf22) correctly..that causes poor resolution (1152*864 max) my screen is able to at least a 1600*1200 resolution (witch i use in my windows boot ) is there anything i can do in order to fix or increase the resolution ?.. i have already installed the drivers correctly
asus p7p55d
intel core i5 750
nvidia geforce 9500gt
wd640GB black caviar
View 9 Replies
View Related
Apr 20, 2010
I'm trying to setup a virtual machine running Ubuntu server 9.10 in Hyper-V on a windows 2008 server.
However it can't detect the network adapter (Virtual NIC uses Broadcom NetXtreme Gigabit Ethernet).
After doing some research on a Windows forum i was told to try using the legacy network interface. Annoyingly 64bit edition doesn't seem to have this.
Anyone know how i can get around this?
View 2 Replies
View Related
Apr 24, 2010
Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies
View Related
Aug 10, 2009
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies
View Related
Aug 3, 2010
I am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 Replies
View Related
Sep 10, 2010
I run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
View 2 Replies
View Related
Apr 28, 2011
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
View 1 Replies
View Related
Feb 12, 2011
I want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
View 1 Replies
View Related
Mar 1, 2010
I have a external usb 20Gb hdd. It was a ntfs partition but i could'nt mount it, so I try with a ext3 partition, because with centos it's mount automaticly, but... for some reason that I don't know, even with a ext3 partition my centos don't detect my external usb hdd, howerver I already try to mount it on ubuntu to see if it work, even on windows with some programm to recognize ext3, it was alright, but why can't i mount it on my centos?
View 13 Replies
View Related
Oct 2, 2010
I am trying to set up Vista on my Lucid within VirtualBox so I can run 3CX IP PBX. I have installed the virtualBox and set up a virtual space called "Vista", but when I start it (Power on) I get an error message - see screenshot enclosed. If I run the command
HTML Code:
'/etc/init.d/vboxdrv setup'
as instructed in terminal I get.
HTML Code:
root@server:/home/server# /etc/init.d/vboxdrv setup
WARNING: All config files need .conf: /etc/modprobe.d/dahdi, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/dahdi.blacklist, it will be ignored in a future release.
[code]....
View 9 Replies
View Related
Feb 16, 2011
I can't get Ubuntu v10.10 to start on VirtualBox running under Windows XP. The installation wen smoothly. However when I try to start the machine what I see is a mere black screen... The boot order is fine. However it seems strange that no data is read from the virtual hard drive (which is about 2.15 GB):
What should I do ?
View 3 Replies
View Related
