I am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 RepliesI have been playing with Ettercap on my home network, learning about packet forwarding and all such things. Recently, after doing some certificate stuff, Ettercap is performing the SSL attack where it sucks out the password of a user after it issues a fake certificate. How do I turn off the SSL attack in ettercap when I'm not interested in SSL information?
View 1 Replies View Relatedi am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies View RelatedI run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
I want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
I'm trying to write a small script and there's one part of it that makes me sick:
Code:
ifconfig eth$num down
sleep 6
ifconfig eth$num hw ether $mac
ifconfig eth$num up
The problem is that the ethX interface doesn't go down immediately after the first line is executed. So sometimes the change of MAC is called while ethX is up, no matter how big is the sleep time, which results in an error. Is there a way to make this work right?
In C++ or C, is there anyway to detect the name of the module or driver currently used by a network interface card (either wired or wireless, INCLUDING USB DEVICES)?My application must have this feature. I just want to detect whether the module / driver is ndiswrapper or not.
View 4 Replies View RelatedI have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies View RelatedRecently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies View RelatedI have a FireWire camera LifeSize connected to my PC in the FireWire interface. My PC has miniPCI slot and with external converter its having a FireWire interface. Now its Ubuntu who is not showing me anything at all when i try:
$ uname -a
Linux desktop 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux
[code]....
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies View RelatedI tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
This was weird. I just updated my software, through a "setenforce 0" and root shell access since the last update before this left me with a bugged GUI updater, restarted and then logged back in to . . . no users visible in GDM at all. There was nothing but a huge "Other" box staring me in the face. I got the idea to check /var/log/messages and then the GDM greeter logs from there, and here is what I came up with.
/var/log/messages
Quote:
gdm-simple-slave[2259]: WARNING: Unable to close session: no session open#012
[code]...
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
I am running 11.04 with a dual boot of vista. I am also running virtualbox (downloaded from oracles site) I installed the extension pack from their website, I have added a new filter and I am in the user group but still virtualbox will not see the usb ports or the device plugged in. The reason for running virtualbox is if I can get the usb to work, I will then remove vista completely from my system and just virtualbox for the only two programmes that do not work in Ubuntu.
View 9 Replies View RelatedSo I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies View RelatedI have a external usb 20Gb hdd. It was a ntfs partition but i could'nt mount it, so I try with a ext3 partition, because with centos it's mount automaticly, but... for some reason that I don't know, even with a ext3 partition my centos don't detect my external usb hdd, howerver I already try to mount it on ubuntu to see if it work, even on windows with some programm to recognize ext3, it was alright, but why can't i mount it on my centos?
View 13 Replies View RelatedI goggled a lot on how to get ettercap working on ubuntu, but unfortunately wasn't able to find anything good.
So, i decided to make a new post about it.
1. The GUI mode crashes after scanning for hosts.[ Fixed by downloading the version by timothy]
2. After Scanning, When you start Sniffing, and run the chk_poison plugin it says no poisoning at all . Why, i am not able to poison it at all?
3. Running the original ettercap in text mode(-T), also gives the error , if you uncomment the two lines required for SSL sniffing, then you are met with error saying that you don't have enough permission to and suggest that i should either upgrade iptables or my kernel[I am sudo]. O.o?
I can not manage to get any passwords on my network with Ettercap.I have followed several tutorials but I still seem to have no luck in getting them.I have BT5/KDE/32bit installed and using an alfa network adapter (RTL8187).First I configured etter.conf script to look as below:
ec_uid = 0 # root is the default
ec_gid = 0 # root is the default
# the command used by the remote_browser plugin
[code]...
How can I create an ettercap log ?, how can I read it with etterlog command ?.
And how different new version of etterlog and etterlog v0.6.6 ?. How can I get ettercap v0.6.6 manual ?
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies View RelatedI have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies View RelatedI'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
im using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies View RelatedUbuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
I'm running Karmic Koala on my laptop and I'm attempting to connect to my university's secure wireless network. I was directed here by the university's computer help websiteI've followed all the steps, but when I open the wireless network authentication applet and try to browse to my private key, I can't find it. The "chose your private key" window claims to be looking for "DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12)," and while my private key file shows up as a .p12 file when I open that location with my file browser, the file doesn't show up when I try and browse to it from the authentication applet. I've attached an image which shows the file in one window, but not in the other f clarification.
View 7 Replies View RelatedRight so I just bought an Acer TimelineX with a Broadcom BCM43225 BCM43225 802.11b/g/n WiFi card. With this card I am not able to detect any wireless networks and after googling around I found out other people have had similar issues. But my problem is kind of unique in the sense that I'm using Backtrack as my Linux distribution (I'm not a blackhat or anything, more of an enthusiast with no malicious intentions) Also I'm not a God at Linux so if you have any solutions please be verbose! I tried the following: [URL] But the Makefile spits out a syntax error. (Makefile:29: *** missing separator. Stop.)
[Code]....