I want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
As the Title states, "update-grub" does not detect the windows xp partition on /media/sda1. And, when I attempt to mount it from teminal nothing happens, and from nautilus I receive the following error: "Error mounting: mount exited with exit code 2:
mount: only root can mount /dev/sda1 on /media/sda1" I am root.
booting 4m external it goes into rescue mode saying uknown partitionwen i boo 4m computer grub it says no such device.Cannot even browse via grub command line. Says unknown partition.Posting via mobile
View 4 Replies View RelatedI've searched quite a bit and cannot find a solution to why using update-grub cannot detect my windows 7 partition Here is a log of the bootinfo script(hopefully it pastes correctly...)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
[code].....
I installed Ubuntu 9.10 yesterday on my computer. I had Windows XP and Windows 7 (I deleted the Windows 7 partition and installed Ubuntu 9.10). However, after installing Ubuntu, I couldn't access the grub boot menu. So I googled, and I found out how to make the menu show up again. That was okay. But Windows XP didn't show up. So I googled a bit more, searched the forums, and I added the following entry to my 40_custom file code...
As far as I know, that should work. The uuid I entered there is the one that gparted told me was the uuid of the partition. However, this isn't working. I get a disk read error when I try to boot my Windows XP.
According to my gparted, my Windows XP drive is inside an extended partition? I wonder if that has any influence on why I'm getting the disk read error, or anything. It's either that, or my 40_custom entry is wrong. I've been trying to sort this out for a while now, and I'm afraid I'm not getting anywhere with it.
I have a laptop Acer Aspire 5538 (AMD Turion 64x2). I just installed Ubuntu 10.04. I like it but I still need windowsXP to run some ''old'' software. So Installed WindowsXP Media Center and Windows7 Home Premium (from my recovery DVDs). But Grub2 only detect Ubuntu and Windows7, and not WindowsXP! I undated Grub2, reinstalled it, manually modified it but no success. I finally reinstalled WindowsXP M.C. and reboot on Ubuntu by reinstalling Grub2 with the liveCD : no solution! (even before installing Ubuntu, Windows7 wasn't able to detect WindowsXP).
View 9 Replies View RelatedI have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies View RelatedI am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 Replies View RelatedI run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
I have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies View RelatedRecently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies View RelatedI installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
I installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
View 3 Replies View RelatedThis was weird. I just updated my software, through a "setenforce 0" and root shell access since the last update before this left me with a bugged GUI updater, restarted and then logged back in to . . . no users visible in GDM at all. There was nothing but a huge "Other" box staring me in the face. I got the idea to check /var/log/messages and then the GDM greeter logs from there, and here is what I came up with.
/var/log/messages
Quote:
gdm-simple-slave[2259]: WARNING: Unable to close session: no session open#012
[code]...
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
I am running 11.04 with a dual boot of vista. I am also running virtualbox (downloaded from oracles site) I installed the extension pack from their website, I have added a new filter and I am in the user group but still virtualbox will not see the usb ports or the device plugged in. The reason for running virtualbox is if I can get the usb to work, I will then remove vista completely from my system and just virtualbox for the only two programmes that do not work in Ubuntu.
View 9 Replies View RelatedSo I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies View RelatedI have a external usb 20Gb hdd. It was a ntfs partition but i could'nt mount it, so I try with a ext3 partition, because with centos it's mount automaticly, but... for some reason that I don't know, even with a ext3 partition my centos don't detect my external usb hdd, howerver I already try to mount it on ubuntu to see if it work, even on windows with some programm to recognize ext3, it was alright, but why can't i mount it on my centos?
View 13 Replies View RelatedI am trying to add an entry to grub2 to turn the computer off using the 'halt' command, but grub2 freezes and I have to manually reboot. I have tried both 'halt' and 'halt --no-apm', both with and without 'insmod halt' first. The 'reboot' command however works fine (even without 'insmod reboot') so it doesnt seem to be an acpi/apm issue. This was all tested at grub2's command line, so there isnt any problems with syntax in the config file. The laptop I am trying this on is an Acer Aspire One, I am using Ubuntu Netbook Edition 10.04 (Lucid), and a more or less default config for grub2 (GNU GRUB 1.98-1ubuntu6) as far as modules are concerned.
View 1 Replies View RelatedI'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies View RelatedI have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies View RelatedI'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
im using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies View RelatedUbuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
I'm running Karmic Koala on my laptop and I'm attempting to connect to my university's secure wireless network. I was directed here by the university's computer help websiteI've followed all the steps, but when I open the wireless network authentication applet and try to browse to my private key, I can't find it. The "chose your private key" window claims to be looking for "DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12)," and while my private key file shows up as a .p12 file when I open that location with my file browser, the file doesn't show up when I try and browse to it from the authentication applet. I've attached an image which shows the file in one window, but not in the other f clarification.
View 7 Replies View Related