Debian :: Impossible To Connect With Adsl
Apr 21, 2010
i've installed debian lenny 5.0.4 in my hp laptop,using an officiel cd , i've installed ppp, pppoe, pppoeconf to configure an adsl connection (the dhcp is automatically configured on eth0)the trouble is : that ifconfig works fine, but when i want to connect it is impossible , this is my interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
View 14 Replies
ADVERTISEMENT
Jul 25, 2010
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies
View Related
Sep 19, 2009
I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).
My current setup is as follows:
* A-link Roudrunner 44B Modem connected to the main line
* D-Link DI524 Router (port 1) connected to the modem
* This leaves me with 3 ports and Wireless for my other machines
What I wish to do is:
* Have all my machines with static IP addresses for LAN
* still have internet connection
I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.
View 16 Replies
View Related
Mar 30, 2011
After reinstall Ubuntu 10.04 LTS didn't recognize my ADSL router Billion 400 G.The Ethernet 1 led is off after booting.Search on web for help on this but no good results.You good people now are my last resort.I tried boot in live CD and result is the some.Check with sudo lshw.
View 9 Replies
View Related
Aug 6, 2009
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies
View Related
Apr 27, 2011
how to connect to internet via ADSL,and wireless. i am writing all these frome windows
View 2 Replies
View Related
May 23, 2010
I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
View 1 Replies
View Related
Sep 19, 2010
I'm using ubuntu 8.04 . Each time I return form suspend mode, the network icon in the right upper conner show a sign "!", which maybe mean there's limited network connection as in windwos. How can I solve this problem?
View 1 Replies
View Related
Oct 22, 2010
i cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Quote:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
View 8 Replies
View Related
Nov 24, 2010
My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies
View Related
Jun 11, 2010
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies
View Related
Feb 28, 2010
i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,
- I can get into the router as user admin / admin at address 192.168.1.1
- I get missed in between pppd setup & my kernel modules insertion . . .
- can I find a clear step by step guide to get me connected to the internet ?
View 2 Replies
View Related
Nov 30, 2009
Due to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies
View Related
Feb 5, 2011
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies
View Related
Apr 1, 2011
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
View 5 Replies
View Related
Sep 19, 2009
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies
View Related
May 1, 2011
I am trying to install Debian for my best friend by resizing his Windows partition so that I can install Debian on a separate partition. But, I get this message when I try to resize Windows: "for some unknown reason impossible to resize this partition. Check /var/log/syslog or see virtual console 4 for details." I do not know how to check virtual console 4 for details and besides I won't be able to interpret it. I also tried defraging the Windows hard drive several times and using several livecds with GParted to try to resize. They all failed.
View 6 Replies
View Related
Apr 9, 2010
I use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
View 3 Replies
View Related
Jul 19, 2011
I was using an extremely common debian based distro, but I have been rebooting my pc non stop for the last two days trying to get my nvidia fx5200 drivers to work. (it is just IMPOSSIBLE to disable the nouveau driver, i have tried blacklisting it, editing xorg etc, nothing works) I need to know if there are many issues with getting nvidia graphics cards to work in debian. it seems like the last 18 months worth of releases on all the other debian based distros have completely broken all support for any nvidia card made prior to 2011. i know for a fact that in windows xp all my hardware works perfectly, but i really dont want to have to use that, i have been a linux user for more than 5 years now, but all i am really looking for now is reliability. i want to be able to use the nvidia-173 driver, as i know that this allows me to watch the movies i take on my dv camera, and ......
View 7 Replies
View Related
Nov 26, 2015
I'm a quite new Debian Jessie user. I've a very old laptop and I'm trying Openbox + tint2. Everything is ok with openbox but i have some problems with tint2, especially with tint2conf. When I try to save a config, it says "saving not yet supported".
View 13 Replies
View Related
Mar 26, 2011
I have a desktop PC with Windows 7 and a netbook with Ubuntu 10.04 netbook edition. The two computers are connected in a network with a Belkin modem router (the desktop PC is connected via cable and the netbook is connected wireless). I simply want to have access to some folders on Windows 7 from Ubuntu (I do not need the opposite), but I can not do it in any way. I tried following various guides on the net, I set the permissions of shared folders on Windows 7 (giving permission to everyone: everyone, guests and so on and so forth !)... but to no result. When I look for windows in Ubuntu's network folder, I see absolutely nothing. I also tried directly with nautilus smb://192.168.2.3 (the network address of my computer-desktop), but every trial was useless. I always get a frustrating message: "Retrieving the list of shares from the server failed. " Someone can suggest a solution or which tests can I do to understand where the problem lies? Keep in mind that I'm not a linux expert,
View 4 Replies
View Related
Jul 30, 2015
I try to install Debian 8 on my desktop PC that has a wireless network card.I had already used this computer with debian 7 and I could use my problem-free network connection.
My network card is : Asus PCE-N10
During the installation, a message occured to ask me to load a firmware (rtlwifi/rtl8192cfw.bin) which is loaded from a USB key.After this, Debian-installer seems to find my wireless card but can not find wireless network.I have this message, translated from French: "The search for an available wireless network failed" and I can enter an ESSID but inconclusive.
View 1 Replies
View Related
Feb 20, 2011
My last laptop was replaced (I gave it to my step-dad, his laptop broke and I bought myself a new one).
I am running Squeeze (as I was on my other laptop) and everything is fine except for the games. On my other laptop games like OpenArena and Warzone 2100 ran perfectly fine, but on this laptop, they are impossible to play. The game will open, but everything is so slow and choppy that it takes a couple of minutes to even move the cursor to the exit game buttons.
My current laptop is an HP ProBook4525s with the current specs:
AMD Athlon Dual-Core P340 2.2 GHz processor
2GB DDR3 RAM
ATI Mobility Radeon HD 4250 Graphics Card
I'm not sure what other information to put here, I've tried searching how to fix this and most people say to lower the resolution and details for the games but that doesn't work, heck, even Tux Kart is too slow to play!
When I installed squeeze I was informed that I didn't have the rtl8168d-2.fw firmware for my laptop, I'm not sure if that helps here at all (can't seem to find what it is for, the only things that google gives me are very technical with fixes that involve re-compiling the kernel).
View 2 Replies
View Related
Nov 6, 2009
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
View 12 Replies
View Related
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Feb 3, 2010
The router should handle everything automatically and transparently. All you need to do is make sure that the wireless Ethernet adapters in the laptops can "talk" to the wireless router.
View 4 Replies
View Related
Jan 6, 2010
Since this is my first post, before i describe my problem, i'd like to say regrats to all of you for maintaining here such a good support community.
So, here we go: I have a headless Debian box and i want to set it up as a small office router/gateway. On the box i installed a regular NIC and a Viking Traverse ADSL+ Card which gets recognised by the OS as an 8139 ethernet card and has an embedded ADSL+ modem. The modem is accesible through the PHY interface once it gets assigned an IP. Having said that here is the actual setup:
eth0 : Viking Card
eth1 : NIC (this NIC is connected to a switch)
eth0 : 192.168.1.2 (internal modem is on 192.168.1.1)
eth1 : 192.168.1.3
/etc/network/interfaces
[Code]...
View 1 Replies
View Related
Mar 29, 2010
I can't see any video on Flickr (but I see ..... videos...)My browser is Firefox 1.0 / Namoroka version 3.6.3preI updated the Flashplayer with no results.
View 3 Replies
View Related
Jul 11, 2010
After installing 10.04 netbook remix on my acer aspire one, I have experienced all sorts of trouble. I can't get online, not with the wireless network, or with a usb-cable directly from the router. When I try to install the hardware drivers i get a message: there are no hardware drivers installed or something like that. There are no other OS on the harddrive, just 10.04 netbook remix. Another problem is the startup. Sometimes it boots right away, other times I've have to restart/reboot. 3-4 times before it works. How comes? Is there any way to download the missing packages/firmware to a usb-stick and then install it on the the netbook?
View 6 Replies
View Related
Nov 2, 2010
I've a problem with my installation of CentOs 5.5
I want resize my LVM Partition, but is not possible with Gparted in CentOs or Live CD. When resize my partition of my setup ?
View 3 Replies
View Related
