I recently tried to configure a second monitor on 10.4. Since then I have not been able to log into the desktop. I get the video card at boot, then the ubuntu splash screen and then nothing!
How do I correct this? The video card is nvidea and I guess the configuration file is corrupt but I can see no way to reset/install this.
How to configure SARG to monitor SQUID?
View 1 Replies View RelatedI just installed the new Ubuntu onto my laptop and want to use a second monitor with it in twinview.
I have to use the Nvidia X Server Settings and while I can get the second monitor working, I cant get any resolutions higher than 1024x768. But I know for a fact that I can get better resolutions as I used to use that monitor as my primary. I had to manually change my xorg.conf tho.
How do I change my xorg for the secondary monitor? if I add a new monitor and screen sections it breaks X and it sends me to teminal on boot.
heres what I tried The stuff I added is in bold:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
code....
Looking for a newb-type step by step process for configuring ubuntu to 1) recognize both the onboard video card as well as the PCI graphics card and 2) how to set up three displays with separate desktops (able to mouse-over from screen to screen). So far the 20+ hours searching online has yielded excessively complex instructions, inappropriate instructions, or ancient posts. Is this config even possible? Again, I am learning so the instructions need to be very deliberate. PNY GeForce FX 5200 PCI 256 MB 2 Port VGA + S-Video Graphics Card VCGFX522PEB and an onboard display apdapter (Intel P4 Chipset 845GV).
View 1 Replies View RelatedI am currently running openSUSE 11.3 x86-64 with two monitors, a 24" and a 20", both running off of an nVidia 9800 GTX+ using twinview. Does any one know of a way to have programs open by default on my 24" display or at least default to the display which the program was used previously. My computer seems to prefer to open programs on the 20" more so than the 24". In all other aspects the 24" is the primary monitor. I think that I am looking for some sort of setting within KDE.
View 4 Replies View RelatedThe default Gnome desktop now has a 1600x1200 @ 75 Hz which fit my monitor but is a little too big (or at least the font sizes are too small). I would like to switch to a lower resolution. I don't find anywhere in Yast how to configure the monitor settings. No more sax2, no more /etc/X11/xorg.conf? What does replace them?
I mean, where can I set which monitor I"m using (Targa TM4896-1), what are the screen resolutions supported, if I want hardware 3D acceleration (or not), if I want to use dualhead (Matrox G400 DH)?
I am trying to configure my video card (ATI Radeon X1300) to use two monitors. Now i can see in both the same duplicate screen.
View 14 Replies View RelatedI have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
[Code]...
I could not keep this question from turning into a wall of text so I broke it up into these 4 sections.I have 2 monitors (DELL E228WFP and a DELL 2007FP) hooked up to a EVGA E-GEFORCE 8800GT 600MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I video card. I would like to have the DELL 2007FP set up to the left of the DELL E228WFP and rotated into "portrait" mode^ with both screens sharing a common bottom edge.
This is ideal for reading PDF documentation or papers on one screen and then working on the second one.Steps Undertaken I installed the NVidia drivers (via sudo apt-get install nvidia-current) rebooted ran nvidia-xconfig then ran nvidia-settings. However, like many people, I could not get nvidia-settings to write to my config file despite having run it with kdesudo. Instead, I opened the file with Kate (using KDESudo) and then used the preview from nvidia-settings and just copy pasted it into the file and saved it like that. if I use TwinView I have both monitors working, but when I try to use krandrtray to rotate one of them, it is shown as one large monitor so I cannot rotate just the one I want rotated.However, if I set them up as separate X windows the second one is black and krandrtray only shows the main monitor. I am at a loss of what to try next.
I wants to ask if there is any method to configure bcm4313 wireless adaptor to monitor mode.
I need to do this for my graduate project
till this moment, what I'm sure of is that ndiswrapper doesn't support monitor mode.
Is there any way to use monitor mode on this adaptor?
I'm using Fedora 12 on a Virtual Machine (VM Player).
How do I configure the display monitor to set 256 Colors in Linux Fedora?
I'm currently using ubuntu 10.04 version. I've recently purchased a BenQ E2200HD monitor. However, the monitor is unable to configure a resolution higher than 800x600. I've tried changing it via 'preferences' - 'monitor' etc. The monitor model is 'unknown'. and the highest resolution available is the 800x600.
I've tried changing it manually, but it says x.cong file does not exist. Xrandr doesnt seem to work either. Or i would get CTRC 262. My current set up is, intel i5 2600, 4GB Ram, Nvidia GTS 240. I'm pretty certain, my graphics card (despite being in the low end) can support HD resolution. Even if it can't, it surely can support a resolution higher than 800x600.
I have a laptop lenovo T410s, using RHEL 5.6, 2.6.18-238. I'm trying use the external monitor as dual head using the system-config-display tool, but the generated xorg.conf fails:
Monitor autoprobe results
Monitor autoprobe failed.
And if I boot up with the monitor attached using the old single head valid xorg.conf, both screens stay blank. It works only with the external monitor cable disconnected. I don't know what else to try.
configure nagios to monitor custom port on a remote linux server..
View 5 Replies View Relatedhow do i configure a designated monitor to be my main desktop when running dual monitors in separate x windows?i cant use twin view, as full screen issues and refresh rates are different.
View 1 Replies View RelatedI've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
I am new to this forum. I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge blank space on left and right portion of the monitor.The maximun resolution is 1024*768 and minimum is 640*480.
I have tried many times to solve it using xorg.conf but still unable to do it.
Here is xorg.conf's content :
I just installed fedora 12. during the installation, i used a different monitor (as when i used the one that i want to use with the system, not all of the page displayed - so i could not click on the buttons) . now it only works with the display that i temporarily connected.
i want to use the system with a sony tv via hdmi. the system dual boots, and the tv works with windows 7 (at 1280*720, 60Hz, "generic PnP monitor").
when i try to boot fedora with the TV as the display, the TV is showing stuff right up until the login screen appears (X starts, I guess). then the TV loses the input.
I can SSH into the system with the TV connected, or use it normally with a temporary monitor. I have no experience of successfully configuring HAL or X. how should I go about it?
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedIs there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedI am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies View RelatedCurrently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies View Related