General :: Cannot Configure Second Monitor To Rotate 90' In KDE With Karmic Koala?
Aug 30, 2010
I could not keep this question from turning into a wall of text so I broke it up into these 4 sections.I have 2 monitors (DELL E228WFP and a DELL 2007FP) hooked up to a EVGA E-GEFORCE 8800GT 600MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I video card. I would like to have the DELL 2007FP set up to the left of the DELL E228WFP and rotated into "portrait" mode^ with both screens sharing a common bottom edge.
This is ideal for reading PDF documentation or papers on one screen and then working on the second one.Steps Undertaken I installed the NVidia drivers (via sudo apt-get install nvidia-current) rebooted ran nvidia-xconfig then ran nvidia-settings. However, like many people, I could not get nvidia-settings to write to my config file despite having run it with kdesudo. Instead, I opened the file with Kate (using KDESudo) and then used the preview from nvidia-settings and just copy pasted it into the file and saved it like that. if I use TwinView I have both monitors working, but when I try to use krandrtray to rotate one of them, it is shown as one large monitor so I cannot rotate just the one I want rotated.However, if I set them up as separate X windows the second one is black and krandrtray only shows the main monitor. I am at a loss of what to try next.
View 1 Replies
ADVERTISEMENT
Sep 16, 2010
I'm a bit of a Nooob to Virtual hosting. On my internal network 192.168.1.x I have a dns server running bind9 My DNS / web server is 192.168.1.3 I have succeeded in getting [URL] to resolve and it goes to my web page in /var/www/ Now I want to get say [URL] to go to /var/www/music/
1. What's the best way to go about this?
2. Can I configure it using webmin or do I just do it the old fashioned way through a terminal?
3. I tried virtual hosts via the following method
Added to /etc/apache2/sites-available/default
NameVirtualHost 192.168.1.3:80
Then created
/etc/apache2/sites-available/music.7rocks.com
<VirtualHost 192.168.1.3:80>
ServerName music.7rocks.com
ServerAlias music.7rocks.com
Then
[Code]....
View 4 Replies
View Related
Aug 2, 2010
I am running Kubuntu and want to install windows xp or 7 and run both
View 9 Replies
View Related
Apr 14, 2010
I had some problems with printing pdf on my HP 1020 (it was printing only text, but not figures or pictures). After reinstalling a few times, I realised that problem was not the driver, but the type of pdf format. Some pdf creator (like>cairo, or some creators for Windows) has format which can not be parsed on Ubuntu. Workaround is to 'print to a file' (postscript), save it somewhere and then print that new postscript document.
View 2 Replies
View Related
Mar 11, 2010
I need a program which generates events when a file is moved, removed or its extended attributes are changed. I'm running Ubuntu Karmic Koala 32-bit desktop.inotify is the standard solution for such problems, but inotify cannot install a recursive watch, so the only option is to the equivalent of find on the filesystem, and add an inotify watch on each node. This is what e.g. inotifywatch does. This won't work for me, because my filesystem has 1 million files, and installing watches to all of them takes forever.
fanotify could work except that I would have to patch the kernel for that (I'm currently running 2.6.31-20), and maintaining patches to the Linux kernel is beyond my time commitment.I used to use rfsdelta (whose kernel module is similar to rlocate), but it just doesn't compile on 2.6.31, because it uses obsolete Linux security framework APIs.
View 1 Replies
View Related
Feb 11, 2010
I've been trying to get Grub 2 to work on a desktop system I'm trying to install Karmic Koala on. It's currently got two similar hard drives, which I've partitioned into a small /boot partition and the rest as a large general partition. Both are fd (linux software RAID) types. I boot from the Ubuntu live CD then create the RAID arrays as RAID 1 (requires installing mdadm to work). Then I start the arrays and begin the install.
I select manual partitioning and create the first RAID array (/dev/md0) as an ext4 /boot. The second array (/dev/md1) requires a new partition table. I then partition it as 20G for /, 2G for swap and the rest as /home, giving me /dev/md1p1, /dev/md1p2 and /dev/md1p3. When the install finishes, I mount the various partitions in /mnt (for /dev/md1p1) and below, including binding /dev and /proc. Then I chroot and install mdadm in the new system. I update grub, re-install it on /dev/sda & /dev/sdb then update the initramfs.
A quick reboot and things go wrong... Grub boots me into a recovery console. Apparently it can't see the partitions in the second RAID array. how to get Grub 2 and/or mdadm to work in this situation? I know that apart from the RAID, the above process worked to allow me to set up a Grub 2 boot on an antique laptop with an incomplete install.
View 20 Replies
View Related
Jan 21, 2010
I reinstalled Ubuntu on my HP pc-40 computer. I used to run Hardy Heron and am now running Karmic Koala. The cd drive which had had issues for a while, broke after finishing the install, when I tried to get the cd out.I dont know if this has anything to do with it, or if my computer is too old for Karmic Koala, or if possibly the harddrive didn't appreciate being overwritten a second time - but the graphics are not working well (small squares of previous windows linger in my present browser window*)everythin is much slower, and many applications come up without a border, or their windows cant be moved with the mouse.
To top it off, while I tried to fix a bug with the terminal (no border) and uninstalled it, I couldnt install it back. So no terminal, which really makes even a newbie like me sad.If I cant solve it in a few days I will probably try to install a smaller distro via USB - I think Slax can be installed straight to USB without a live cd?
View 5 Replies
View Related
Mar 17, 2010
I just switched from Jaunty to Karmic, and in the process of setting up desktop effects, I'm having a hard time with configuring the rotate cube compiz effect. Before, I was able to scroll on the desktop (ie, not over a window/application) to spin the cube to the next face. Now, it seems that I either have to use keyboard shortcuts or lose the ability to scroll in applications.
I've tried enabling the mouse scrolling to button 4/button 5 a la this post, but this doesn't fix the problem. This is one of the few desktop effects that really made a difference in terms of convenience, so I'd really like to be able to fix this setting.
View 4 Replies
View Related
Jan 4, 2010
I have read numerous posts about this subject, but being a novis in the Linux field, I cannot say that without explicit step by step instructions I am able to repair or tinker with anything under Ubuntu. In short, my sound has ceased to function. It did work for a period of time and suddenly no more. I have a 64 bit version of Ubuntu 9.1.
View 4 Replies
View Related
Jan 10, 2010
As most users, I am new to Upstart.
I am looking for the easiest way to get my workstation running with the needed services. At this time, these include SSHD and Music Player Daemon.
I ve installed both and they work when activated manually by sudo /etc/init.d/ssh start, or mpd respectively. But I don t have a clue as to how to start them up with an Upstart job?
I ve tried this code...
but to no success.
View 4 Replies
View Related
Jan 11, 2010
Can a 32 bit karmic koala 9.10 support 4gb of ram. i donut want to get 64 bit because of the compatibility problems. so i am wandering can a 32 bit ubuntu run 4gb ram with it?
View 8 Replies
View Related
Mar 27, 2010
using 9.10 Karmic Koala I have a folder of JPGs. Rightclick on one, choose Open With F=Spot. A small window opens. Then a larger one, identifying the F-Spot program. Then everything goes away. Or I go to Applications/Graphics/F-SpotPhotoManager the same thing happens: small window, big window, gone.
View 5 Replies
View Related
Apr 21, 2010
On Dell Inspiron 9200, with or without accelerator for NVIDEA graphics. P.S. I would like to give 9.10 a chance. have gedit and browser open (browser with the forum message being edited), then do the following:
1.This example demonstrates one problem (unresponsive single click) Use the System-->Preferences-->Mouse
Click repeatedly on the light bulb at 1 second interval ---> result: often the light does not turn on. Result: it appears that the click event does not complete. I have noticed that a mouse-out will cause the click to complete (specifically as in 2. and 3 after a brief moment (hopefully before the drag and drop icon appears).
2. Click on any icon, submit button, close, etc. takes many tries.
3. Click on any icon, panel button, link, etc. if you linger a moment a floating icon (a drag and drop hand).
4. Scrollbar button and action follow the mouse outside of the scrollbar. The scrollbar sticks - difficult to make scrollbar stop following the mouse.
5. Example, have two visible windows (for example gedit and the browser) From gedit move to browser by click on browser. ---> result takes forever to recognise the focus and click and go to the broser.
6. Unresponsive UI. In browser highlight text in textarea (with difficulty) then chose Copy (slow UI), from this window click on desktop's Applications (takes many clicks to open), from Accessories click on gedit (slow or takes more than one try), paste (speed of paste OK).
[Code]...
View 2 Replies
View Related
May 19, 2010
I recently installed Karmic Koala server edition, and then did the 'apt-get ..install' for the desktop gnome, but now I'm not sure what to do to get my gui to show. I am stuck at the termanal type command line, it's asking for a sudo comman. I know a few 'sudo' commands, but I really need the gui.
View 1 Replies
View Related
Feb 17, 2011
am running Ubuntu 9.10 on my laptop via USB external HDD.Currently it will not boot.I get the logo followed be an immediate filesystem check.At 90% complete it check crashes followed by the following:
init: mountall main process (500) terminated with status 3
Mount of filesystem failed.
A maintenance shell will now be stated.
CONTROL-D will terminate this shell and re-try.
root@c-desktop:~#
View 1 Replies
View Related
Jan 4, 2010
i've had alot of problems with karmic koala but i think i should blame it on my computer damn things ancient anyways i want to install puppy linux because karmic requires all of my ram to operate but the only problem is that i can't get my CD-RW drive to burn i've ran an image burn through k3b brasero and gnomebaker and everytime i try to burn the image my computer freezes up i'm ready to pull my hair out i want to get puppy linux on this thing so it'll run faster is it because i'm trying to do too much with not enough RAM if so is there a few extra programs i can suspend untill i have burned the OS or
am i missing some kind of file or program or what i mean i can't even get the disc back out even if it unfreezes i still have to restart the system just to get the disc out i know it can't be my disc drive it's not new but it's never been used till now and it didn't come with a driver disc so it can't be that either all i want to do is get puppy linux installed and move on with my life until i buy a new computer then i'll just install the lastest ubuntu version at the time
View 4 Replies
View Related
Feb 8, 2010
i have no problem ( not yet any more ). but i have a question to the development: who had the mangificent idea to change the philosopy of more than 30 year old runlevels ( 0, 1,2,3,4,5,6 ). now when the system is full up who -r and runlevel gives you can anybody imagine how many scripts which are using commands like "who -r", "runlevel" or parse utmp are give up working. i think a couple of thousends. portability is written in unix with capital letters . please send me a message if you plan to change the runlevel to "S" that i can modify my scripts.
View 8 Replies
View Related
Feb 24, 2010
I have a Dell Latitude D620 which came with Windows XP. I have just installed Ubuntu 9.10 on the laptop so it can dual boot but I can't connect to the internet.I have a dynamic IP allocated by my broadband service provider which I access by a wired Netgear DM111P router (not cable). It still works fine when booting up windows.I've read through lots of posts by others trying to find a solution as the 9.10 install has just been done and I've not changed anything.
My tentative assessment is the laptop, when running Ubuntu, is not communicating with the router as there seems to be no IP address allocated by the router.
View 4 Replies
View Related
Mar 10, 2010
I'm using FSC Lifebook S series, to be more specific S7210. I know from specs and from Win that it contains onboard accelerometer, in Win Vista it works perfectly, with FSC supplied "Motion sensor utility" it protects hard disk from damage during sudden shakes of notebook.
The question is - i couldn't anyhow find any note in Ubuntu that it is recognized and is used as it should be. So I'm wondering is it done automatically or it is not used at all? If it is working is there any way to check some status of it, or if it isn't how to get it to protect hdd?
View 1 Replies
View Related
Mar 27, 2010
it has been a year since I've started using Ubuntu linux, and for being calm that everything is working properly, I would like to do a full system check. The only option I've found is on System=> Administration=> System Testing, but this wasn't what I was searching for (mainly because I don't know what is written there- I don't know enough for running this option). Is there something else I can do? maybe something through Terminal?I want to run such a check also because the system sometimes work slowly, and maybe something went wrong...
View 9 Replies
View Related
Jan 8, 2010
Looking for the picture during login on ubuntu 9.10 karmic koala. it's the dark red picture. I'm trying to download so i can put it on my windows 7 login screen.
View 2 Replies
View Related
Jan 8, 2010
I've a problem with Karmic Koala and my macbook1.1 when i plugin hearphones I can't hear sound in it and in the speaker. many thread suggest to use alsamixer but I've only this settings I've NO alsa.conf setting in /etc/modprobe.d/
View 3 Replies
View Related
Feb 2, 2010
I was also having a problem with the Shutdown / Reboot sequence taking ages due to using WiFi, WPA2 and mounting SMB shares. I wasted about 4 hours digging around before I finally realised that the solution involved Upstart. 1. Open a terminal and enter:
Code: sudo gedit /etc/init/network-manager.conf 2. Just below the description line add the following:
Code:
pre-stop script
/etc/init.d/umountnfs.sh
end script
3. Save the script and attempt a restart. I don't know if this will work for everyone, or even what version of Upstart you need for it to work, but it cuts my shutdown time from about 2 mins to about 30 seconds.
Note: This has been working for me about 90% of the time. Occasionally though I see that the script ends prematurely due to the TERM signal and I end up with the 2 minute wait again. I've added the following to the /etc/init/network-manager.conf file:
[Code]...
View 9 Replies
View Related
Feb 4, 2010
I want to using ubuntu 9.10 karmic koala. In that i want to see the file /etc/X11/xorg.cong file. But i didnt find that file in my distro. So please can anyone tell me how to see that settings and if i want to edit that how to do that?without seeing the format and alues in that file i cant add that file.
View 1 Replies
View Related
Feb 5, 2010
how to install the flashplayer, so i can watch videos videos and play flash games... i am a complete beginner, one guy told me to write this code in the terminal: "sudo apt-get install flashplugin-nonfree" that's what i did, but then i got this as a response:
[sudo] password for "myname": (i entered it here)
e: could not get lock /var/lib/dpkg/lock - open (11: resource temporarily unavailable)
e: unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
View 3 Replies
View Related
Feb 5, 2010
I have the System of 9.04, but have a Live CD of Ubuntu 9.10 too. But, I do not want to download all the massive Upgrades. Still, Ubuntu 9.10 is the best! So, can I upgrade 9.04 to 9.10 using the Live CD? (Offline).
View 2 Replies
View Related
Feb 5, 2010
After finally figuring out how to bring up a terminal window in Karmic Koala (obviously a new user) to attempt configure a nVidia issue, it asked for a root password.. I have no idea what the root password is. Is it a generic password or some Linux command?
View 9 Replies
View Related
Feb 11, 2010
I want to install Ubuntu to HDD via USB drive but I can't see my HDD. Only the USB drive is there. I don't have any CD left to burn the ISO, so USB drive is my only choice.
View 4 Replies
View Related
Feb 16, 2010
Where can i get an image of all the ubuntu repositories for karmic koala? i am using a windows machine to download
View 9 Replies
View Related
Feb 21, 2010
I am having problem in grub2 fails to boot the system. I get the error:
Booting from local disk...
GRUB loading.
error: no such disk
System setup:
It's a Dell XPS400 PC with 160 GB HDD. I have a non-LVM, primary partition for the boot file system (/boot) of 200 MB. I also have seven logical volumes (LVM partitions): six for each of the /(root), swap, /home, /usr, /var and /tmp, and one vbox_win_xp_base as a raw disk for running Win XP in the Virtualbox. I went on to configure all these without rebooting the system in between. Later I also updated to the kernel version 2.6.31._20. Next day I decided to reboot my system. But then the bootloader (GRUB2 in my case) won't able to boot it and gives the error mentioned above.
[Code]...
View 3 Replies
View Related
