Software :: Mouse Click On Monitor 1 Kills Full-screen In Flash On Monitor 2 ?
Feb 23, 2010
I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
View 12 Replies
ADVERTISEMENT
Feb 21, 2010
My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode.
However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu).
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jul 19, 2011
I am trying to run flash video on my secondary monitor IE my 32" lcd tv which I have hooked up via DVI. my problem is when I bring the window over to the secondary monitor, which I would like to watch whatever on while browsing, and try to put it in full screen it defaults to the primary monitor which is my laptop. can anyone tell me how to change the defualt full screen to the secondary monitor and not the primary?
View 2 Replies
View Related
Feb 11, 2010
I just rebuilt my fedora box and I'm having some problems getting dual monitors to work. First, I can't reposition my secondary monitor to be on the left. It thinks it's on the right. I can use xrandr to fix this, but that is annoying. Is there no way to do this in the display properties? Second, maximizing a window makes it go across all screens. I unchecked this option in the display properties.I also unchecked the one for letting windows be in multiple monitors at once, but this still happens.
View 4 Replies
View Related
Aug 8, 2010
im installing ubuntu onto a friends ibook, but am first running it live off the disk. it runs well, except for one thing, the display has a problem,i guess it seems like its tiled on the monitor, instead of fullscreen, it has a full desktop taking about 2/3 of the monitor, a sliver of the same desktop right below it, and a line of black to the right.
View 6 Replies
View Related
Nov 9, 2009
What happens is that the sound will disappear, either without any apparent reason, otherwise when I move the mouse, or pause vlc, or open up another application, in most cases FF. I have also seen the mouse flash while vlc is in fullscreen, and immediately afterward the sound is gone. When the sound disappears, the gnome-volume-control will disappear and reappear on the top taskbar. Also there will be no device under the hardware and input tab of the sound preferences when the sound disappears.
Killing and restarting the pulseaudio daemon from the cli will return the appropriate choices under sound preferences hardware/input tabs, as well as the audio. This could happen a couple of times in the period of an hour. Usually restarting vlc will solve the problem, or restarting the pulseaudio daemon. Another thing I have noticed is that I will occassionally have to kill the vlc process through the system monitor or cli, as closing vlc will not remove it from the taskbar. I have tried the fix shown here, to no avail. Using kernel 2.6.30.9-96.fc11.x86_64 on a hp dv3-2154ca.
[code]...
View 1 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Dec 15, 2009
I am new to this forum. I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge blank space on left and right portion of the monitor.The maximun resolution is 1024*768 and minimum is 640*480.
I have tried many times to solve it using xorg.conf but still unable to do it.
Here is xorg.conf's content :
View 5 Replies
View Related
Mar 20, 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies
View Related
Nov 4, 2010
I have a dual-screen set-up with Ubuntu 10.10. I have an ATI Mobility Radeon HD 5650 video card. I use my lower-resolution laptop screen on the left and a larger monitor on the right. The monitor is also physically higher than the monitor. See attachment for a screenshot.I have correctly set up my displays so that if the mouse is in the middle of the screen it can move from one screen to the other without jumping. The jumping happens when moving off of one screen in an area where the other screen is not directly next to it (some people call this 'the void').
Example: (See the attachment for a visual example of this.) My mouse is in the external monitor (right monitor). As I move the mouse to the top-left of the monitor (position 1), I by mistake go a little too far and instead of hitting the Ubuntu applications menu, I ended up at the top-right of the laptop monitor (left monitor; position 2). I quickly realize my mistake and move the mouse back to the right monitor, but now the mouse is at the middle-left position (position 3).This same error occurs by moving the mouse on the laptop monitor (left monitor) passed the bottom-right position. This is a big problem when scrolling vertical scroll bars on the laptop monitor (left monitor).I am looking for a fix that if the mouse is at position 1 in the attachment and I move the mouse left, it stays at position 1 and does not go to position 2.
View 2 Replies
View Related
Nov 14, 2010
problem happens after installing nvidia driver.everything was fine.the nvidia driver has been detected and functioning correctly.but my monitor,acer x173w which can go for maximum resolution of 1440x990 but i'm still using 1024x768.
View 1 Replies
View Related
May 27, 2011
Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies
View Related
Jul 26, 2011
Today my desktop reverted to 1024x768 resolution immediately after init. I tried changing it back but only 1024x768 and 800x600 are listed as supported in the display settings, even though my monitor supports resolutions of up to 1360x768. Rebooting the system did not solve the problem.I'm running Fedora 15 x86_64 on kernel 2.6.38.8-35 with the proprietary nvidia drivers of version 275.09.07. My monitor is a Samsung SyncMaster 933n. nvidia-settings is apparently not detecting it correctly, it thinks I'm using a CRT monitor.I was actually in this exact same situation a few months back, but it kind of went away on its own, so I didn't mind too much. So, what could be causing this, and what can I do?
View 13 Replies
View Related
Nov 30, 2010
I have two video outs on my AGP video card. One is VGA and the other is S-video. I tried connecting the second monitor (Viewsonic) by itself to the VGA port and it works fine and runs at 1280x768 very clearly. I then attached the LG monitor instead to the VGA and attached the Viewsonic to the S-video port. Now it is running at 1024x768 and I have no option to increase the resolution.Is this a limitation based on S-video being worse than component, which is worse than VGA and it simply cannot handle the data density for larger resolutions? Or would it be my video adapter? I swear I had monitor control working fine through the panel, but now when I click on the monitor button it says, "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and that opens an Nvidia X control panel.
Also, using S-video means the computer doesn't recognize the Viewsonic LCD TV properly, it just recognizes it as a TV. Is this because S-video doesn't play nicely with EDID reporting?It would be nice to get a sharp picture on that TV, the way I had when it was connected like a monitor via VGA. I am not sure what's going on anymore, so any help on clearing up driver issues or getting configuration apps installed or anything like that would be helpful.
View 5 Replies
View Related
Jun 23, 2011
I'm running opensuse 11.4 with two monitors. Both are detected. The onkly problem I have is that the mouse does not reach the other monitor.
View 6 Replies
View Related
Mar 6, 2010
I'm using two monitors, they're virtually placed next to each other so the virtual screen resolution is (1024+1280) x 800px. Now my mouse speed on the x-axis is automatically set higher, which is good if you permanently switch between both monitors all the time. But I don't need it, so how do I turn it off? It's kinda annoying if you're used to your "normal" mouse speed.Y-axis speed is still fine. also, is there a way do display the gnome-do dock on the right handed monitor? it places itself always on the left monitor....I'm using Mint 8 which is Ubuntu 9.10 with gnome 2.28.1
View 1 Replies
View Related
Apr 30, 2010
I am using a Asus UL30A laptop computer. I just performed an upgrade from 9.10 to 10.04. I remember running into this problem before, but I forgot how to fix it. The problem is, when I plug my laptop into the external monitor with my laptop screen turned off automatically when I first log in, I do not see the mouse cursor on the external monitor! The mouse cursor is still here, although invisible - if I do a right-click, the property menu will come up. My current workaround is simple- if I switch to the next workspace (by pressing Ctrl-Alt-right arrow), the cursor will appear from then on.
View 1 Replies
View Related
Nov 9, 2009
I installed Centos 5.3 x86_64 and jumped out to me the problem with which I cannot manage.
After about 10 minutes from the start of the system becomes detached to me the monitor, the keyboard and the mouse.Itself system in himself works and I have a possibility to connect myself across ssh or else mappings of disks.
View 1 Replies
View Related
Apr 29, 2010
I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Aug 11, 2011
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
View Related
