OpenSUSE Install :: OS 11.3: Configure The Monitor Settings?
Jul 17, 2010
The default Gnome desktop now has a 1600x1200 @ 75 Hz which fit my monitor but is a little too big (or at least the font sizes are too small). I would like to switch to a lower resolution. I don't find anywhere in Yast how to configure the monitor settings. No more sax2, no more /etc/X11/xorg.conf? What does replace them?
I mean, where can I set which monitor I"m using (Targa TM4896-1), what are the screen resolutions supported, if I want hardware 3D acceleration (or not), if I want to use dualhead (Matrox G400 DH)?
View 9 Replies
ADVERTISEMENT
Feb 16, 2010
I've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
View 7 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
Dec 24, 2010
I'm running openSUSE 11.3 64 bit KDE 4 standardI have two monitors attached, running simultaneously, nicely, all is well.But when I reboot I have to set them up again because the settings don't stick/endure through a reboot.The GUI configurator that I use is at Menu --> Config Desktop --> General --> Display.How do I save the underlying settings and re-invoke them at boot time, perhaps from the CLI? Or some quick process that will do the job.
View 8 Replies
View Related
Aug 28, 2010
If I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?
View 1 Replies
View Related
Jul 14, 2011
I am currently running openSUSE 11.3 x86-64 with two monitors, a 24" and a 20", both running off of an nVidia 9800 GTX+ using twinview. Does any one know of a way to have programs open by default on my 24" display or at least default to the display which the program was used previously. My computer seems to prefer to open programs on the 20" more so than the 24". In all other aspects the 24" is the primary monitor. I think that I am looking for some sort of setting within KDE.
View 4 Replies
View Related
Apr 1, 2011
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies
View Related
Mar 8, 2011
I'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
View 4 Replies
View Related
Apr 20, 2010
I have a work desktop plugged into the work network. As I opened my firewall settings I noticed that it is turned off. My question is how should I configure it? I saw that the interface isn't assigned to any zone... I should assign to internal zone and open some port that I need in order to work? There are some guidelines for configuring the firewall?
View 2 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
Jun 29, 2010
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
View 1 Replies
View Related
Jun 24, 2011
I am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?
View 9 Replies
View Related
Apr 3, 2010
Is it possible to make two computers have the same users, home directories, and users? As in if I login to one computer and add things to the home directory can you apply it to the other computer and if I add a user on computer 1 the user will be on computer 2.
View 9 Replies
View Related
Nov 26, 2010
I recently installed 11.3 from the network install CD and I wanted to configure GRUB to have a boot password. I went into the necessary options and enabled the password and saved. I went back in to confirm it stuck, and the password option was unchecked and the password was blanked.I re-entered the information and just carried on. The installation summary didn't mention any password being applied to GRUB, but I just kept on going. Sure enough, there is no password on boot with GRUB now.I tried this over multiple installs in the past couple days, as well as with the 11.2 network install CD, and on no install was the password option honoured
View 4 Replies
View Related
Jul 16, 2010
I installed 11.3 as a "fresh" install (not upgrade) into a second partition, so now I have both my current 11.2 and the new 11.3 as a dual boot.
I'd like to migrate my old KDE (4.4.3) settings to the new 11.3 (KDE 4.4.4) installation, most importantly KMail and its archived mail folders. My plan was to copy the kmailrc file from the ~/.kde4/share/config/ folder and overwrite the default kmailrc that's on 11.3 and then replace the ENTIRE ~/.kde4/share/apps/kmail/mail/ folder on 11.3 with the one on 11.2 (including the hidden files and folders).
My questions are:
1. would this work, or am I missing other files and folders.
2. Would I be better off just copying the entire ~/.kde4 folder from 11.2 partition to 11.3?
View 3 Replies
View Related
Dec 4, 2010
Not sure if this is correct place to ask this but here go:I have the following setup today:
sda openSUSE 11.2
sdb openSUSE 11.4 ms3
sdc openSUSE 11.3 (production)
sdb is my test environment. sda is still around since its the only way I can power down my system. 11.3 and 11.4 hang on power down. (Another subject) I have the 11.4 ms4 dvd made and I want to install to sdb without carrying over any of the settings. In the past I've just formatted and installed but the settings for the user and root were saved. Want to do a total fresh install. Reason for not carrying over setting is problems with Akonadi not starting (tried all the trouble shooting tips), and Vbox freezing keyboard and mouse when installing XP.
Russ
openSUSE 11.3 (2.6.34.7-0.5-default)|KDE 4.5.3 Release 10|
Intel core2duo 2.5 MHZ,|4GB DDR3|GeForce 8400GS
View 3 Replies
View Related
Jan 18, 2010
I move from Win to SUSE. I install Suse 11 on notebook with pluged extern monitor, but when i un-plug this monitor then no screen is visible - only black screen. In "failsave" it works but in normal ee :-(and I tryed clone screen- nothing) SUSE detect only ext monitor. Manual settings of resolution is not working.
View 2 Replies
View Related
Jun 11, 2011
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies
View Related
Feb 8, 2009
I have an old PC on which I want to install openSuse 11.1. After install the PC will sit as a box minus any screen or keyboard. I aim to access it using VNC from another VISTA laptop. How should I configure the linux box to support this scenario? In otherwords I want to be able to switch on a Linux box that has no keyboard or screen, and then connect to it from a remote laptop using VNC?
View 9 Replies
View Related
Jul 19, 2010
I am extremely disappointed in this 11.3 release. openSUSE had a system that worked. I never had a major problem with the Nvidea video drivers before this release. When I did have a problem with the drivers (usually because Nvidia screwed up) I was able to easily use "The hard way" to install the drivers and all was good. But now the system is so screwed up that the drivers wont install. I can't find a working Saxx2 anywhere. nvidia-settings won't install from rpm. What the hell is going on? This release should have been held up until this garbage was fixed. Novvaeu (sp?) won't work for some of the programs I want to run.
I probably changed so much stuff that I bet my system won't boot now. Oh and what happened to the lack of repair software on the install disk? For two versions now the only repair option we have had is the command line. That's great if you use those tools on a regular or semi regular basis.
View 5 Replies
View Related
Apr 4, 2010
My default display (DF-770 monitor) comes up something like 1280x960. In the "configure desktop" > display I set the display to 1152x864@75Hz. Next I accept the setting after the preview. When I reboot, the display is back to 1280. Do I have to manually edit some file to make my selection permanent?
Sysconfig editor has a variable that starts off with 1024x768, but that doesn't seem to be my problem, so I didn't mess with it. How do I get my display preferences saved?
View 5 Replies
View Related
Oct 8, 2010
I have no clue why KDE is doing this, but whenever I reboot the system, the resolution resets to 1024x768. I really need to stop it from doing this. Also, Sax2 doesn't seem to be working and there is no xorg.conf file that I can see of.
View 4 Replies
View Related
May 20, 2011
I had a machine with 11.3, and tested 11.4 live CD. It looked good, network worked and so did compiz. But then I installed, and I can't see any wireless networks, the screen flickers and compis doesn't work. Is there any way to simple reset all settings so that they become the live-cd settings?
View 4 Replies
View Related
Jun 28, 2011
attempting to reinstall 11.3, my system always freezes up at different points. Always during actual installation (not setup). Burned an 11.4 disc and the same happens. First was a DVD, but the new one is a CD, and now with the new version, a little dialogue comes up at the start to tell me 1 gig of RAM may not be enough. Well, it always was before. Is there a certain combination of settings which may make it run better? Also, a live session works fine.
View 9 Replies
View Related
Jun 23, 2011
I have two monitors. One on my laptop, and one hooked into the VGA port on the laptop. I want to use these as an extended desktop.
I can set everything up correctly, but after I reboot, or shutdown, all of those settings have to be manually put in again. This is consistent.
how to get these settings to be permanent?
View 1 Replies
View Related
Nov 14, 2010
I am trying to view my pc on my new flat screen but am unsure of the settings. I am using ubuntu 10.10. I have been trying (and on ocassion succesfully, but never really understood what I have done) to view my pc through the monitor option under preferences. Selecting the different monitor size but always find my external monitor (ie TV) is to the left, right above or under the screen I see on my PC. Also I am unable to hear my PC through the TV. I should say this is a good quality flat screen and all I am unsure of are the correct settings to use my TV as an external monitor.
View 4 Replies
View Related
Sep 5, 2010
I just bought a 31.5" HDTV and have it connected to my laptop as a monitor. My laptop monitor is cracked and pretty much useless so I would like to be able to keep it turned off and stick with my new monitor. So far, I have managed to accomplish all of this, just one problem, I will need to go through too long a process for every login to set it all up again. I'm hoping someone can help me simplify this and have everything done automatically while Ubuntu is booting or even right after login.
Process:
Code:
$ cvt 1366 768 60
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
[code].....
View 1 Replies
View Related
Dec 10, 2009
After I login my desktop preferences are not loaded. If I try to change them (Control cneter-> apparence) I get a message that says: Unable to start the settings manager 'gnome-settings-daemon'.Without the GNOME settings manager running, some preferences may not take effect. This could indicate a problem with DBus, or a non-GNOME (e.g. KDE) settings manager may already be active and conflicting with the GNOME settings manager.The first lines of .xsession-errors show:
/etc/X11/xim: Checking whether an input method should be started.
HOSTNAME: Undefined variable.
XDG_DATA_DIRS: Undefined variable.
[code]....
View 5 Replies
View Related
Mar 8, 2010
after fresh install of Opensuse 11.2 and online update, the window decoration settings disappeared from my "configure desktop" appletNow I'm doomed to some default window decorations.
View 9 Replies
View Related
Oct 14, 2010
Is there any way to save my desktop settings for the next time i log on when using live cd?
View 1 Replies
View Related
