I'm not 100% if that's what it says, because it goes by in like a second.
But when I boot up my computer, the screen stays black for a while, then gives me that error. But then it loads up Ubuntu successfully with no problems.
I was just hoping to fix this, because it causes it to take a while to boot up.
So I bought an eMachine e250 from a friend of mine, and installed Backtrack on it. That worked fine, until I realised that I didn't like KDE, and decided to get the gnome-based Gnacktrack (based on Ubuntu 10.10, so I'm fairly sure they work the same). I also have a harddrive from an old laptop that I've scrapped with Ubuntu 10.4 that I run in the laptop, and fpr some bizzare reason, neither operating system is able to detect the wireless card. It worked fine with Backtrack (based on Noppix I believe), and I'm curious as to why the wireless card hates Ubuntu so much. I know that it's unable to detect the wireless card because on start-up it says "Unable to detect WMID device". I even added the wireless card from my scrapped laptop to the laptop, and that NIC was detected just fine. (though I can't use it because the antenna won't reach the slot for the secondary NIC)
View 6 Replies View Relatedim using acer ao532h and just install lucid dual boot with w7. I have problem this mesej coming out when booting after grub then blank screen direct to login screen.
View 1 Replies View RelatedI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedI can't access my USB devices via Computer, yet I can generate a list with:
Code:
lsusb
Output:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0a48:5014 I/O Interconnect Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I'm trying to detect an external HDD drive, but I don't know how. My PC has a total of 6 USB ports, they're all being used, and the Computer File Browser lists only 4 USB ports and I can't open them.The ports could be detected in Windows Vista, except I've not tried the new HDD enclosure, but it crashed.
View 5 Replies View Related"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
I bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies View RelatedStrange to me that a search only seemed to turn up some partial instructions for enabling detection of new USB devices (not discoverable in a default install) in 11.1 and no later. I assume perhaps incorrectly that things have changed since so attempted the following.
Objective: Discover an HTC G1 phone to use as a modem. So, after the phone is discoverable by SuSE the next step would be to configure the connection.
Current: It seems that this phone is listed in /etc/usb_modeswitch.d/
Attempt: I assumed incorrectly it seems that it should have been sufficient to simply create a file in the /etc/usb_modeswitch.d/ directory with the appropriate TargetVendor and TargetProduct codes as follows
Filename: 0bbr:0c01
Code:
########################################################
# HTC Android G1 Phone
DefaultVendor= 0x0bb4
DefaultProduct=0x0c01
[Code]....
I need the proper way to do this in OpenSuSE 11.3. A bonus would be if someone could verify that after the modem/phone is recognized whether the next step is to configure the device using YAST/modem.
I am running UBUNTU 10.04 on an X86 system 64bit. I am trying install a wireless keyboard and am not having much luck.
-My non wirelessUSB keyboard and mouse work fine.
-My wireless logictech mouse works fine without adding any special drivers/packages
-Wireless Keyboard (LX500, uses same receiver as mouse) does not work with standard config
-Adding HIDPOINT and selecting my wireless mouse and keyboard (LX500) - wireless key board does not work. Mouse still works.Since my wireless mouse worked before HIPOINT installation (64 bit), I believe HIDPOINT is not working.
HIPOINT Does not detect my wireless devices auto, must manually select them. So I believe that there is some conflict with other drivers.Can anyone point be in a direction to look? What are the typical configuation files and drivers used to configure standard USB mouse and keyboards? What are some other software that might be installed that is conflicting with HIDPOINT?
I've been struggling a bit with install F11. F10 installs without issue. I have two internal SATA drives, a PATA DVD-ROM and a USB drive. The BIOS recognizes everything. However, when I got to the disk partition utility, Anaconda could never detect one of the SATA devices. I tried swapping cables, ports, etc. No luck. Today, I ran across this Bug thread: [URL] I checked the screens Ctrl-Alt-F1-6. Nothing obvious. But, for fun (from the bug thread) I went to the prompt on 2 and ran:
dmraid -r -E It found an "nvidia" RAID "thingy". Forgive my ignorance on what it really is called or what it does. Anyway, I answered yes to erase the "thingy" and voila. I was able to install F11. Not sure if I made a good title, but I've seen bits and pieces of people having similar problems with F11. And BTW, the drive that had "nvidia" on it was from a machine that was using nvidia hardware RAID 0 - but F10 had no problems with it.
I want to devolep one "C/C++" program that will work as a daemon. My daemon will be running all the time, and whenever anybody attaches removable devices to machine on which my daemon is running, My daemon should catch that event and also should show me where that device has been mounted.
View 1 Replies View Related[URL]
In the above link am using for the Disable for USB device. how i can re enable the USB devices.
I'm trying to create a media box for my TV. I've installed a barebones ubuntu from minimal install disc. After that I installed xorg and XBMC. But my usb devices are not automounting. Is there a pacakage im missing? I've read that XBMC should be able to handle mounting of devices and that no window manager or desktop environment is needed to handle this.
I followed these two tutorials and my current install is 10.04 Lucid.
http://forum.xbmc.org/showthread.php?t=38473
http://wiki.xbmc.org/?title=XBMCbuntu
Current version of XBMC is 10.0
My netbook DOES seem to know when I plug in or remove an external monitor. Can I get it to simply auto-switch?
View 4 Replies View RelatedI want to disable mounting usb storage devices except some devices based on its vendor id. I tried by adding below udev rule in debian wheezy
Code: Select allACTION=="add", SUBSYSTEMS=="usb", RUN+="/bin/sh -c 'for host in /sys/bus/usb/devices/usb*; do echo 0 > $host/authorized_default; done'"
ACTION=="add", ATTR{idVendor}=="054c", RUN+="/bin/sh -c 'echo 1 >/sys$DEVPATH/authorized'"
But it disabled all usb devices(USB keyboard and mouse). How can I allow other devices except storage devices.
I recently installed Fedora on an old computer of mine that I pulled out of storage, and I can not get it to detect my wireless network. Previously it was running Windows XP and I was able to get it to connect, but now that I'm on Fedora it doesn't even detect my network. I tried lspci and lsusb but I didn't find anything under network, only Ethernet showing my linksys. I know I must have a wireless chipset, but nothing will show.
I also attempted to yum install ndiswrapper because another thread with a similar problem suggested this, and when it prompted me for my password it wouldn't let me type. How would I go about fixing this?
I just bought a Nokia N900 and it's a beautiful device!
Naturally, since it runs Linux, it's unable to synchronize with other Linux devices. It's one of those wacky universal constants you can't seem to understand.
I've tried using SyncEvolution, which supports funambol, but it does not work. It keeps complaining about a failed authentication or whatnot.
I have been using ubuntu 9.10 for about a week and have had problems with my keyboard and track pad on my laptop. I can navigate grub (I'm dual booting) but once ubuntu starts to load then I am unable to use my input devices. Even using cap locks doesn't turn on the corresponding light. As fa as I can tell it seems intermittent and I can make an STR.
View 1 Replies View RelatedI am running 11.04 with a dual boot of vista. I am also running virtualbox (downloaded from oracles site) I installed the extension pack from their website, I have added a new filter and I am in the user group but still virtualbox will not see the usb ports or the device plugged in. The reason for running virtualbox is if I can get the usb to work, I will then remove vista completely from my system and just virtualbox for the only two programmes that do not work in Ubuntu.
View 9 Replies View RelatedI have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies View RelatedI'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
Ubuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
I'm running Karmic Koala on my laptop and I'm attempting to connect to my university's secure wireless network. I was directed here by the university's computer help websiteI've followed all the steps, but when I open the wireless network authentication applet and try to browse to my private key, I can't find it. The "chose your private key" window claims to be looking for "DER, PEM, or PKCS#12 private keys (*.der, *.pem, *.p12)," and while my private key file shows up as a .p12 file when I open that location with my file browser, the file doesn't show up when I try and browse to it from the authentication applet. I've attached an image which shows the file in one window, but not in the other f clarification.
View 7 Replies View RelatedPreviously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
Booting to CentOS 5.5 works and I am able to login with all my devices mounted. When I boot from the install DVD and type "linux rescue" I eventually get the message, after attempting to have one of the screens mount my partitions in read/write mode:
"An error occurred trying to mount some or all of your system. Some of it may be mounted under /mnt/sysimage." But nothing appears mounted under /mnt/sysimage. Should I try mounting my CentOS 5.5 partitions manually at this point ?
Ubuntu wont detect my screen (mag bf22) correctly..that causes poor resolution (1152*864 max) my screen is able to at least a 1600*1200 resolution (witch i use in my windows boot ) is there anything i can do in order to fix or increase the resolution ?.. i have already installed the drivers correctly
asus p7p55d
intel core i5 750
nvidia geforce 9500gt
wd640GB black caviar
I'm trying to setup a virtual machine running Ubuntu server 9.10 in Hyper-V on a windows 2008 server.
However it can't detect the network adapter (Virtual NIC uses Broadcom NetXtreme Gigabit Ethernet).
After doing some research on a Windows forum i was told to try using the legacy network interface. Annoyingly 64bit edition doesn't seem to have this.
Anyone know how i can get around this?
Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies View Related