Ubuntu :: Only Boots Into GUI With Screen Plugged In
Nov 24, 2010
I've got a desktop 10.04 LTS installation working nicely, and leave it logged in processing things for me. I log in remotely and don't always leave the screen plugged into the computer. Trouble is when I reboot it without the screen plugged in it will sometimes boot to a command prompt.If I turn it off, plug in the screen and turn it on again I get into the GUI as normal. I can't see any settings to change this behavior - what am I missing?
View 1 Replies
ADVERTISEMENT
Jul 17, 2011
I installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences.
I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents:
/media/disk$ tree
.
|-- adtext.cfg
|-- boot.cat
|-- f10.txt
|-- f1.txt
[Code].....
Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Apr 15, 2011
So I think it's a problem with the resolution not changing back. But I don't see any menu, like the HP Logo, on my monitor at all. Thought It might be the blue cable, changed it, nothing. Plugged it back into TV and it works fine.
View 2 Replies
View Related
Jul 15, 2011
Acer 5250-BZ475 laptop, fresh install of Ubuntu 11.04. Boots up beautifully as long as an ethernet cable is plugged in. Otherwise, I get to the login screen and have just enough time to start typing in my password before the entire system hangs hard - no mouse, no keyboard, can't even get to a terminal, nothing. Have to hard power off the machine.
It seems to be a problem with the wireless card trying to initialize, but there doesn't seem to be a bios option to disable wireless on this laptop, so I'm a bit at a loss as to how to fix this problem. By the way, wireless works fine if I boot up with a cable connected - I can see all the wireless access points in my area no problem. I just can't boot without a wired connection, which makes my laptop more or less useless when I'm away from home with it.
View 8 Replies
View Related
Mar 1, 2011
Something plagues my Ubuntu box since I upgraded to Ubuntu 10.10 - I end up with a blank screen while booting. I use an Asus F81SE Notebook, and Dual Boot with Windows XP. Everything worked fine with Ubuntu 10.04.
When I start my notebook after the upgrade to Ubuntu 10.10, I come to Grub, and when I select the latest kernel available, the hard disk LED blinks for a second, turns off ... and nothing happens any more. There is just a blinking text cursor.
As I upgraded from the previous Ubuntu version, there was an older kernel left (2.6.32-26-generic), which boots up fine.
I run 64 Bit on an Intel T4200 CPU. Booting the Live CD brings me to the purple screen with the open source logo at the bottom. I tried 32 Bit and 64 Bit versions of Ubuntu 10.10.
I don't seem to find similar problems on this forum. But does anyone know how to find the mistake?
View 9 Replies
View Related
Apr 10, 2011
I installed Lucid Lynx to a Gateway Solo Pro 9300(600 Mhz/224 M) and everything looked normal on the display with cursor,icons and abatross background. I rebooted and I have a blank screen with only a cursor showing. I don't think it is a video card problem because I had a normal display upon installation. Is there a way, on boot, to get into a diagnostic mode? what should I look for in the diagnostic mode?
View 4 Replies
View Related
Jun 27, 2011
I just set up a ubuntu 11.04 Desktop 32-bit installation on an older pc that I found in the basement. It was running xp before and had 2 hard drives so I left the xp install alone and installed ubuntu on the second hard drive. It all booted up and worked fine until I rebooted it for the 2nd or 3rd time, now after I select ubuntu from grub it just loads to a black screen. Even in recovery mode if flashes the text across the screen and then also goes to a black screen. Now what seemed really wierd is that the same thing occurs if I try to boot from the usb drive i used to install it the first time, but win xp boots fine.
View 2 Replies
View Related
Feb 9, 2010
php pavilion ze4900 was workign perfectly then i installed some navidia driver thing ( wich wasnt for my cp) and then when i restarted it went blank.
View 7 Replies
View Related
Mar 16, 2010
Don't know if this is a coincidence, but the other day we had a power cut and my laptop went off. When I tried to reboot it got to the ubuntu start up screen, but when it tries to get to the "desk top" screen it all goes blue and black flashes. I have XP and Vista on the same machine and these both start up ok
View 2 Replies
View Related
Apr 25, 2010
About 1/2 - 3/4 of the times I boot my PC to 10.04 RC, It quickly goes into a white screen at the beginning and then just hangs there. I updated from 9.1 and it did this, then I fresh installed and had same issue, including when I tried to boot of the 10.04RC boot CD (before 10.04 was even installed). There is nothing listed under sys/admin/hardware. In all cases, I have to hold power button, and keep rebooting...eventually, it will boot normally. I had no problems in 9.04 (nor on XP which I had on the system originally). I do not have a dual boot system, only ubuntu. I have ATI x1900 video AMD 64 X2 dual core 4200 Asus MSI motherboard 2gig ram 250 gig WD HD
View 8 Replies
View Related
Jun 20, 2010
So I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies
View Related
Mar 19, 2011
I have a Ubuntu 10.10 system that I haven't been using in a while. Upon turning it on, it boots to a stripped down login screen (not the usual nice one) with a warning about power configuration. When I try to login it flashes a terminal and then reverts back to the login screen. I recorded a quick video if it helps: [URL].
View 2 Replies
View Related
May 2, 2010
I upgraded from 9.10 yesterday, overall, I do like this; but, it has issues:Sometimes, it boots to a login screen, no graphics. I must reboot; then,I do get the graphical login screen.My graphics is an integrated nVidia GeForce 6100. nForce 405.When I look to download more drivers, I see Hardware Drivers jockey-gtk,
and nVidia Binary X.Org driver 185 are installed. I suspect the graphics drivers to be the issue.I see the option to install X.Org driver 173, and 96 for older cards. Is my card that old?My desktop: x64 with 1 gig of RAM.Lucid also boots slower than Karmic, could this be the nVidia driver as well?
View 3 Replies
View Related
Apr 8, 2010
I've had no problems out of my multi-boot setup.. at all, and now all of a sudden (after an update on ubuntu? my JoliCloud and Ubuntu seem to do the same thing.. they show the logo then go to a black screen, doing nothing afterwards. i was wanting to know how to get this working again.. this is an Acer aspire One 11.6in AO751h. it's using grub to boot into it. i used EasyBCD to get it to let me choose ubuntu from windows start menu and it takes me to grub and all works(well worked until some update?) well.. even my windows 7 boots up just fine...
View 1 Replies
View Related
Apr 25, 2010
I am a complete Linux newbie and I tried installing the latest release candidate (10.04) as a dual boot with Windows XP. The install seemed to go fine and it said it needed to reboot to finish the install. It rebooted and then displayed a series of errors on a DOS-like screen (which I wish I wrote down). When I realized that it was definitely hung, I then held the power button to shut it off. After that, all it does is boot to up to a blank/black screen with a cursor.The box is old and I was actually going to throw it away, but I figured this was a good opportunity to give Linux a try. At this point, I'm willing to go to either Windows or Ubuntu... I don't really care which. I actually just want to recover some files on the box
View 7 Replies
View Related
Jun 23, 2010
I'm using Ubuntu 10.04 64-bit, which is installed to a second hard drive on my desktop. Earlier this afternoon, there were two 10 second power outages in my neighborhood. The first caused the system to restart with no effect, but after the second outage Ubuntu no longer boots properly. The problem is this: When I boot, I get to the grub screen. I have tried choosing four different options (the most recent kernel, a slightly older kernel, and the recovery mode of each). For each, kernel begins loading, but at a certain point the input to the monitor dries up, and after a few seconds the monitor enters standby mode. When I boot into recovery mood, the last message I see before the screen goes blank includes "udev starting version 151" followed by three lines that read "assuming [something that I can't read before the screen goes blank]." The computer itself remains on, but I have no way of knowing exactly what it is doing.
There seems to be no hardware damage as I can boat into Vista, and I can also boot into 10.04 from a USB. I've used fsck to check the partitions on my hard drive and the test came up clean for all of them. Since I only installed 10.04 a week ago, I could just copy the handful of useful files I have to my external drive and re-install, but I'd like to get some experience troubleshooting this problem. My first assumption is some kind of problem with the video drivers or GUI.
View 2 Replies
View Related
Jul 17, 2010
after spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies
View Related
Jan 5, 2011
It's my first time trying to install Ubuntu. My problem is that booting from USB stick or trying to run "install to drive" both result in a black screen. Here are my specs:
HP EliteBook 8440p Intel Core i5 M520 @ 2.40 GHz NVIDIA NVS 3100M
Ubuntu 10.10 64-bit deployed to USB stick using Universal USB Installer 1.8.2.2.Searching around seems the problem is the way Nvidia graphics card is handled. I found a recommendation to set 'nosetmode' option, but found no easy way to do this on the current USB boot menu.Currently tried pressing TAB on the boot menu option and adding '--nosetmode' to command line, but result is the same.Does anyone have any suggestion about what I should try next?
View 3 Replies
View Related
Jan 25, 2011
I deinstalled Ubuntu today. Just deleted the partitions etc and thought it would be fine, but now this weird grub thing is telling me:
error: no such partition
grub rescue>
I am at the end of my wits: I downloaded a liveCD, which will not boot. My XP cd boots but gets a blue screen afterwards I downloaded a windows 7 live cd which did not help either
Problem is, I can't load my bios anymore to change the boot order... Didn't even know Grub was part of linux...
Point is, I got a presentation tomorrow and all my important files are on that laptop. . . the setroot=(hd0,0) gives no response. I tried a bunch of other commands but I keep getting unknown command...
View 7 Replies
View Related
Feb 5, 2010
I might want to try and put a gui on my ubuntu server installation went fine however now I'm staring at a blank screen. ubuntu boots goes to screen similar to desktop (loading with the mouse cursor) and then blank... occationaly it'll load a partial username box but more offten than not it loads a completly blank screen and the caps lock and scroll lock lights on the keyboard are both blinking consistantly...
View 1 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Mar 28, 2011
I recently did an upgrade over the internet from the previous version 10.04. After everything required was downloaded and installed, I rebooted. Now, the system only displays a blank screen after a quick flash of "Ubuntu 10.10".
I have a copy of the 64-bit Desktop install CD of 10.10. I tried to boot up live with it. Same problem.
My system:
K8M800 motherboard
AMD Sempron 2600+
1 Gig RAM
Integrated graphics: VIA S3 UniChrome Pro
View 6 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Aug 16, 2010
My next door neighbor has a dell Optiplex gx270 and wanted Ubuntu installing.
Hardware:
1gb RAM
P4 2.4
Intel 82865g Onboard Graphics.
40gb HDD
I tried the live cd and it froze on bootup, so I thought it might not be enough ram as the case sticker said 512mb ram. So I booted the minimum install cd and installed ubuntu desktop on it and then rebooted, when it boots i get grub and then screen will either do 1 of 2 things.
1. I get another flashing cursor in top left corner and then cursor stops flashing and then nothing happens at all.
2. Then screen will go black and nothing will show at all.
I have tried updating the BIOS, adding i915.modeset=0 to grub, didn't work either. Also couldn't find the xorg.conf under /etc/X11 to change driver to vesa. After several reboots atleast 30 since the check disk think showed and then it froze again. it booted correctly so I tried the latest intel driver from xorg edgers ppa. Rebooted and still the same thing happens. tried 2 different installs now and get same results. I have had to put winxp on it so he can atleast use it, but this will run out in 30 days unless he decides to buy it.
View 6 Replies
View Related
Oct 2, 2010
Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
View 9 Replies
View Related
Jul 23, 2010
My laptop will be fine, then it turns off then immediately boots itself to a blank screen and no hard drive activity. This has happened 3 times today and never before. what ive done so far The first time this happened i tried turning it off and back on, still no screen and no hard drive activity so i took one of the RAM sticks out. Booted fine... To confirm that the RAM was bad i put it back and tried booting again, unfortunately it booted fine... i thought it was a fluke.
Until his happened a second time and instead of taking the RAM out, i waited a half hour and rebooted and it started booting fine, i turned my back for a sec and it was dead again. I have taken that RAM module out and am hoping it will not happen again, but it could well be the other RAM module since i really don't know or even if it is RAM at all.
Question is. Is this a RAM issue or something else? Where can i find a log to see what happened immediately prior to it offing itself? What's the chances it's the heatsync? (the laptop doesn't feel as hot as it sometimes does)
View 8 Replies
View Related
Jun 10, 2011
I was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 Replies
View Related
Jun 10, 2011
Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
View 1 Replies
View Related
