Ubuntu :: Boots Up Showing Logo - Then To A Blank Screen ?
Apr 8, 2010
I've had no problems out of my multi-boot setup.. at all, and now all of a sudden (after an update on ubuntu? my JoliCloud and Ubuntu seem to do the same thing.. they show the logo then go to a black screen, doing nothing afterwards. i was wanting to know how to get this working again.. this is an Acer aspire One 11.6in AO751h. it's using grub to boot into it. i used EasyBCD to get it to let me choose ubuntu from windows start menu and it takes me to grub and all works(well worked until some update?) well.. even my windows 7 boots up just fine...
View 1 Replies
ADVERTISEMENT
Sep 28, 2010
i have installed xubuntu desktop on my Ubuntu PC. But now the login screen and the bootsplash screen are showing Xubuntu logo etc . How do I fix this?
View 3 Replies
View Related
Jul 4, 2010
I recently got a new laptop (Aspire 5741) and have installed ubuntu 10.4 on it. I have been very happy with the computer and OS. However the only problem I have had is that I am unable to change the screen brightness. Last night I though I found a fix. I cant remember the specific thing but it was something similar to this [URL]. On reboot the ubuntu logo came up and a few seconds later it showed a distorted ubuntu logo. After this it just goes to a black screen. I have tried booting into recovery fail proof graphics mode, and the problem still arises.
View 3 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Mar 1, 2011
Something plagues my Ubuntu box since I upgraded to Ubuntu 10.10 - I end up with a blank screen while booting. I use an Asus F81SE Notebook, and Dual Boot with Windows XP. Everything worked fine with Ubuntu 10.04.
When I start my notebook after the upgrade to Ubuntu 10.10, I come to Grub, and when I select the latest kernel available, the hard disk LED blinks for a second, turns off ... and nothing happens any more. There is just a blinking text cursor.
As I upgraded from the previous Ubuntu version, there was an older kernel left (2.6.32-26-generic), which boots up fine.
I run 64 Bit on an Intel T4200 CPU. Booting the Live CD brings me to the purple screen with the open source logo at the bottom. I tried 32 Bit and 64 Bit versions of Ubuntu 10.10.
I don't seem to find similar problems on this forum. But does anyone know how to find the mistake?
View 9 Replies
View Related
Apr 10, 2011
I installed Lucid Lynx to a Gateway Solo Pro 9300(600 Mhz/224 M) and everything looked normal on the display with cursor,icons and abatross background. I rebooted and I have a blank screen with only a cursor showing. I don't think it is a video card problem because I had a normal display upon installation. Is there a way, on boot, to get into a diagnostic mode? what should I look for in the diagnostic mode?
View 4 Replies
View Related
Feb 9, 2010
php pavilion ze4900 was workign perfectly then i installed some navidia driver thing ( wich wasnt for my cp) and then when i restarted it went blank.
View 7 Replies
View Related
Apr 25, 2010
I am a complete Linux newbie and I tried installing the latest release candidate (10.04) as a dual boot with Windows XP. The install seemed to go fine and it said it needed to reboot to finish the install. It rebooted and then displayed a series of errors on a DOS-like screen (which I wish I wrote down). When I realized that it was definitely hung, I then held the power button to shut it off. After that, all it does is boot to up to a blank/black screen with a cursor.The box is old and I was actually going to throw it away, but I figured this was a good opportunity to give Linux a try. At this point, I'm willing to go to either Windows or Ubuntu... I don't really care which. I actually just want to recover some files on the box
View 7 Replies
View Related
Jun 23, 2010
I'm using Ubuntu 10.04 64-bit, which is installed to a second hard drive on my desktop. Earlier this afternoon, there were two 10 second power outages in my neighborhood. The first caused the system to restart with no effect, but after the second outage Ubuntu no longer boots properly. The problem is this: When I boot, I get to the grub screen. I have tried choosing four different options (the most recent kernel, a slightly older kernel, and the recovery mode of each). For each, kernel begins loading, but at a certain point the input to the monitor dries up, and after a few seconds the monitor enters standby mode. When I boot into recovery mood, the last message I see before the screen goes blank includes "udev starting version 151" followed by three lines that read "assuming [something that I can't read before the screen goes blank]." The computer itself remains on, but I have no way of knowing exactly what it is doing.
There seems to be no hardware damage as I can boat into Vista, and I can also boot into 10.04 from a USB. I've used fsck to check the partitions on my hard drive and the test came up clean for all of them. Since I only installed 10.04 a week ago, I could just copy the handful of useful files I have to my external drive and re-install, but I'd like to get some experience troubleshooting this problem. My first assumption is some kind of problem with the video drivers or GUI.
View 2 Replies
View Related
Feb 5, 2010
I might want to try and put a gui on my ubuntu server installation went fine however now I'm staring at a blank screen. ubuntu boots goes to screen similar to desktop (loading with the mouse cursor) and then blank... occationaly it'll load a partial username box but more offten than not it loads a completly blank screen and the caps lock and scroll lock lights on the keyboard are both blinking consistantly...
View 1 Replies
View Related
Mar 28, 2011
I recently did an upgrade over the internet from the previous version 10.04. After everything required was downloaded and installed, I rebooted. Now, the system only displays a blank screen after a quick flash of "Ubuntu 10.10".
I have a copy of the 64-bit Desktop install CD of 10.10. I tried to boot up live with it. Same problem.
My system:
K8M800 motherboard
AMD Sempron 2600+
1 Gig RAM
Integrated graphics: VIA S3 UniChrome Pro
View 6 Replies
View Related
Jul 23, 2010
My laptop will be fine, then it turns off then immediately boots itself to a blank screen and no hard drive activity. This has happened 3 times today and never before. what ive done so far The first time this happened i tried turning it off and back on, still no screen and no hard drive activity so i took one of the RAM sticks out. Booted fine... To confirm that the RAM was bad i put it back and tried booting again, unfortunately it booted fine... i thought it was a fluke.
Until his happened a second time and instead of taking the RAM out, i waited a half hour and rebooted and it started booting fine, i turned my back for a sec and it was dead again. I have taken that RAM module out and am hoping it will not happen again, but it could well be the other RAM module since i really don't know or even if it is RAM at all.
Question is. Is this a RAM issue or something else? Where can i find a log to see what happened immediately prior to it offing itself? What's the chances it's the heatsync? (the laptop doesn't feel as hot as it sometimes does)
View 8 Replies
View Related
Aug 16, 2010
My next door neighbor has a dell Optiplex gx270 and wanted Ubuntu installing.
Hardware:
1gb RAM
P4 2.4
Intel 82865g Onboard Graphics.
40gb HDD
I tried the live cd and it froze on bootup, so I thought it might not be enough ram as the case sticker said 512mb ram. So I booted the minimum install cd and installed ubuntu desktop on it and then rebooted, when it boots i get grub and then screen will either do 1 of 2 things.
1. I get another flashing cursor in top left corner and then cursor stops flashing and then nothing happens at all.
2. Then screen will go black and nothing will show at all.
I have tried updating the BIOS, adding i915.modeset=0 to grub, didn't work either. Also couldn't find the xorg.conf under /etc/X11 to change driver to vesa. After several reboots atleast 30 since the check disk think showed and then it froze again. it booted correctly so I tried the latest intel driver from xorg edgers ppa. Rebooted and still the same thing happens. tried 2 different installs now and get same results. I have had to put winxp on it so he can atleast use it, but this will run out in 30 days unless he decides to buy it.
View 6 Replies
View Related
Aug 25, 2011
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
View 1 Replies
View Related
Jun 15, 2011
I've just done a clean install of 11.4 from a Net install CD. I left it unattended while it installed, and came back to find a blank screen with just an xterm. I've rebooted it, and tried both the normal and the failsafe modes, but I just get the same result. The terminal contains the following:
[code]...
View 6 Replies
View Related
May 18, 2011
When i try to shut down the computer hangs itself by showing a blank screen, then i have to do forced shutdown by pressing the shutdown key for a long time.why it is so?
View 2 Replies
View Related
Jun 3, 2011
Yesterday I got an update in update-manager: gdm blabla 3.2... installed. restarted. And I see nothing after the boot screen (plymouth, default one) display stays blank, even caps-lock doesn't turn on its indicator on the keyboard. hdd activity indicator on the laptop doesn't blink, only power indicator is on...
the only way is to press and hold power button to turn it off. restart and I see the same picture........
I thought that's hdd, because yesterday ubuntu froze completely on a ..... video (adobe I hate you!)
so I turned laptop off and started again (before it froze I installed that gdm "security-"update) and saw the blank screen for the first time.
then I booted into "single" mode, manually starting X OR GDM gives me the same blank screen with frozen/unusable keyboard, caps-, numlock do not word, I can't switch virtual terminals...
so I've reinstalled the whole system an hour ago. Everything went well!!!!I booted into clean 11.04 (except my configs, cuz I haven't formated /home partition). Then I restored my ppa's (/etc/apt) that I backed up from the 'single' mode... updated apt database, restored all of my backuped apps (dpkg --get-selections >... dpgk --set-selections <...)an hour to update everything. installed ati driver, RESTART, and what I see? BLANK SCREEN RIGHT AFTER PLYMOUTH.
startx from single mode = blank screen
gdm start from single mode = blank screen
I can't use ubuntu, PLEASE HELP ME fixing that crap.
I downloaded yesterday gdm blabla3, blabla3.1 and blabla3.2
downgraded the crapped gdm-0ubuntu3.2 to 3 and to 3.1 NO DIFFERENCE. I JUST GET BLANK SCREEN.
before restoring the apps everything worked.
and yesterday THE ONLY INSTALLED UPDATE WAS gdm
there are absolutely NO ERRORS in /var/log/*I viewed every file from that dir, that was created at boot attempt...no errors, nothing, just blank screen
View 2 Replies
View Related
Aug 10, 2011
1. Installed Ubuntu 11.04 32 bit for my 64 bit laptop to run alongside windows 7.
2. Installation worked, but had problems booting - it booted sometimes from the grub menu other times didn't
3. Found no solutions for problem so deleted grub and removed the ubuntu OS from disk management.
Since that time I've been attempting to install the long term support (version 10.04) for a while and nothing's happening. The button to "install" or "try without install" leads me to the ubuntu logo screen with the dots flashing under then a blank screen. The memory stick's light doesn't flash either hence it's not working. I've tried the 32 bit and 64 bit version, downloaded from multiple sources and converted the iso using multiple programs.
I then tried the 11.04 version again in 64 bit but that didn't work so I tried what I did in the beginning, the 32 bit version and it works. It feels a bit like after the first install my laptop only wants to install the 32bit 11.04 version and is a bit racist (can i say that?) to the other versions so completely rejects them. Why?
Is there any chance if I try to use a cd to boot that version and it may work from there?
And if I can't run 10.04 for some weird reason technical or w.e, can someone reccommend me another REALLY good version for a beginner which is easy to install and doesn't have too many problems.
View 8 Replies
View Related
Oct 17, 2010
Yesterday I upgraded from 10.04 to 10.10 (x86_64). The upgrade itself succeeded, but now just before the login screen appears there is an almost fullscreen nVidia beta logo showing up. With 10.04 it did not.
Driver version is 260.19.06, graphics card is a GeForce GTS 250.
How can I hide the logo? I can't find a setting for it in the nVidia X server settings.
View 5 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Aug 20, 2011
I have installed Fedora 15 64bit live with no apparent errors and I get to the "Welcome" where it says just a few more steps before I can start using Fedora after filling in the details hit the "Forward" button in the lower right hand corner. The problem is I can't see the forward button, its like I need to page down or something but everything I have tried isn't working. I then decided to use the Fedora 15 64bit DVD thinking a driver was missing or something and it is still the same issue. I am using a Thinkpad T61 laptop with an external monitor and the external monitor goes blank when it boots to the welcome screen, but I can scroll over to the external and see the mouse cursor on the external. It seems that if I could see the welcome screen on the external monitor that I might be able to see the "Forward" button. Both installs went without a hitch, the DVD install found my internet connection and downloaded a bunch of stuff and the DVD install took about two hours to complete, again with no errors reported. I hope I am not being daft here and missing something obvious.
View 2 Replies
View Related
Apr 18, 2011
When I try to connect a projector to my laptop (already running) and hit the fn+f7 (the designated button for switching screen), nothing happens. I see "no source found" on projector screen and my laptop screen works perfectly. Now if I restart the laptop with the projector connected, I see all the intial booting messages on the projector screen (not on my laptop), then the gnome login screen appears on both the projector screen and laptop (when the login screen appears on laptop it looks like it has lower resolution than my usual laptop resolution). But immediately after I log in, my laptop screen goes blank, and projector screen becomes the only active screen.
If I restart without the projector, again all normal operation on laptop screen is restored.
I feel like I am missing some very silly options. Any help is appreciated.
Here is the output of xrandr when the laptop is connected:
Code:
View 3 Replies
View Related
Jul 3, 2010
Firstly when I first installed Ubuntu on my machine, the bootscreen logo was small and high resolution, and it looked nice, however as I started using Ubuntu I must have done something for it to change to large and low resolution.
I try the live cd again and that one is normal, so it must be my settings.. and also when I am shutting down, the screen shows some messages I can't read because it's kind of fast, and the messages are kind of low res too.
View 9 Replies
View Related
May 6, 2010
This is my first problem since I use ubuntu the problem is: Ubuntu does not mount any DVD and it recognize all the dvds as blank, I believe its a problem of drivers but I am not sure, besides I tried medibuntu.
View 2 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Aug 22, 2011
can I change the debian logo on left-top with a my personal logo?
Edit: i use Debian Squeeze 6.0.2
View 9 Replies
View Related
Mar 7, 2010
When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 Replies
View Related
May 14, 2010
Is there any way I can "change" the login screen logo to the one I have in the picture?
I thought if I placed it in usr/share/backgrounds it would change them both but to no avail.
View 5 Replies
View Related
Dec 31, 2010
I've installed Ubuntu on another PC and most things are great except fore the black screen that you get when you start the PC (just before the Ubuntu Logo). It stays black for 20 seconds. Is there something I can do to make it shorter like on my other PC.
View 9 Replies
View Related
