Fedora :: PC Boots And Start Running The Services The Screen Just Hangs?
Jun 10, 2011
Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
I rebooted my Fedora 11 server via SSH and when it came back up it booted the gui, but no option to log in just a mouse pointer and a spinning blue circle...nothing I can do to get it back.
I should add that I installed the latest updates this morning and this was the first reboot since then.
Should I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
I can view my website, and ssh in when I've logged in already at home, but if the system gets rebooted, and gets as far as the login screen, I am not able to view the web site or ssh in. I was wondering how to set things up so thatthese services are running independent of logging in.
I have several services set to start in init 3 on a cloud provider. The init scripts appear to be in the correct folder but the services are never started after a reboot. I finally watched the console and all the services start correctly then shutdown after a few moments.
I am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
I have 2 services registered one for HAProxy and one for stunnel. When I type service start haproxy or service start stunnel they start and everything works fine. I ran ntsysv and they are set as autostart, and I have init.d scripts that work. I have checked the runlevel and using chkconfig runlevel 3, 4 and 5 are :on. And I also added service haproxy start and service stunnel start to inittab. But when I restart the computer haproxy and stunnel fail to autostart. I am a fedora novice and I have no idea why this isn't working...
I have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
Whenever I start up my laptop running Fedora 14, I notice that it says that it is failing to connect to my default wireless network since the wireless card is not activated. Since it appears that the wireless card is not activated until the NetworkManager service is started, is there anyway for me to set NetworkManager to start before this check is made? Boot message log is attached. [URL]
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I'm trying to install 11.04 natty on an HP Probook 6455b and failing.
Using two different burned cds I'm able to start the install process
1) I can get to the initial menu and interact with it to change command line options
2) I can boot the kernel and see services trying to start
At some point the system hangs and I suspect because upstart is starting services in parallel the console messages aren't showing the same consistent point for the hang.
with my last run using --verbose on the command line the last few lines are:
I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user password: xxxxxxxx -> I keyed in my password -> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
I am setting up a CentOS server that has no screen connected, and only has 2 Tesla cards. I have created a minimal xorg.conf and xinitrc file that doesn't load mouse or keyboard, and only creates two screens, one for each card at 320x200x24 bit. This is so I don't waste VRAM on a framebuffer I can't see.
I modified the xinitrc to just load tdm and nothing else as GNOME is a RAM hog. I am then using this setup to render stuff offscreen using OpenGL into FBOs which I read back to CPU and process. Currently for development I just run startx& when I login. I now want to know how to set x server to start automatically at boot. The CentOS docs say that it will try to load the GNOME login manager. The thing is that I don't want a login manager as it is useless as I login remotely via SSH.So:
1 - how to enable automatic x server in CentOS (im used to Ubuntu so not sure how to do this on Red Hat variants)
2 - leave x server running without starting login manager
I am going to install Redhat Ent Linux 5 into VMWARE software . My host machine also RHEL 5 . But every time , in VMWARE server , when I install the O/S , it hangs when the screen comes to ,"running anaconda , Ent linux system installer .. ..please wait ..."The problem not solved during the five hours .
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated ---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
The title says it all.I'm not much for the command line so I really don't know how to debug this.Any help would be appreciated .It was working fine then I had some updates and now the window opens but It is just blank.deluge never fully starts.Transmission starts and I was using it for a while but it never worked as well as deluge.no where near for that matter. It was very slow and seemed to choke itself.
I don't know what I did, but for some reason my fedora system hangs on the OS startup when I use my default kernel. I can still use my other kernel to startup the system though, so it's more of an inconvenience really, but any help fixing it would be appreciated.
The default kernel is Fedora (2.6.34.7-61.fc13.i686) when I start up using this kernel the system hangs(I think I using the right term here, but not sure) after these messages code...
I upgraded OpenSUSE 11.2 to 11.3 today using Zyyper on my laptop. Everything went fine with no errors whatsoever. At the end, a message was displayed at the terminal asking me if I want to see the notifications. I pressed "Y" and the system hanged there and then. I had to do a hard reboot. After reboot the system booted fine but hanged at the desktop with no response from the keyboard, mouse, touchpad, etc. The situation's same after many reboots. System boots fine but hangs at the desktop. Screen resolution changed to 800x600.Only power button works! I use it to log off and then do a reboot.
I have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub( # grub-install(, grub-floppy(, # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/.
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
I am trying to give access to ONE single user to start and shutdown tomcat server. The problem being, when I enter syntax: username ALL= /etc/init.d/tomcat5, /usr/local/tomcat/webapps, PASSWD:ALL This gives the user access to start and stop tomcat but also gives user access to start and stop other services within /etc/init.d - such as httpd etc... What is the proper way to give user access to start and stop service, and limiting that power to only one service....
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc) * Up to 1024 MB Nvidia Geforce 8600M GS Turbocache * 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
