Ubuntu Networking :: Get UH-235 WiMAX USB Modem Working?
Apr 16, 2011
Imagine this scenario at my home: I'm working on my laptop using WLAN receiver as I have a router installed at my home. Suddenly the electricity fails (it's a regular incident here in Bangladesh called Load-shedding) and the power source to modem and router dies.As a result, my internet connection drops. To connect to the internet without power, I use this QUBEE UH-235 WiMAX USB Modem. Now I know QUBEE may not be there in your country. But after a bit of research I figured that this UH-235 modem is commont every country. QUBEE just branded its logo on the device and the software within.This one is not my device, mine is here.
In my windows, the software is installed as soon as I plug in the USB. That software then detects the modem, scans for network, and then connects to the internet. No extra CD is required for this. However, on an Ubuntu machine, I can't get it working. I guess there are ways to get this UH-235 modem working on my Ubuntu machine. This is keeping me from using Ubuntu as you know I'll have to restart and log in to WIndows whenever electricity is off as Ubuntu works with Wi-Fi, not this UH-235 modem when the Wi-Fi is out of power
View 5 Replies
ADVERTISEMENT
Jul 26, 2010
Im using usb wimax modem for qubee. its web address is [URL]
in terninal after giving the lsusb command i get the following output
sanjoy@ubuntu:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
after that I give dmesg>output.text so a text file I goet which is attached. output.zip
View 9 Replies
View Related
Dec 14, 2010
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
View 9 Replies
View Related
Jan 29, 2010
I just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?
View 4 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Jun 24, 2011
I have upgraded from Fedora 14 to Fedora 15. Fedora 15 looks very good. Now my 'Bluetooth', 'Wlan' and 'WiMAX' are not working.
View 2 Replies
View Related
Mar 2, 2011
Recently I bought a USB modem SEOWON SWU-3120. According to the manufacturer, Linux is supported, but ubuntu doesn't detect it Both "usb-modemswitch-data" and "usb-modeswitch" packages are installed (I use GSM and CDMA modems without any problem).When I try to add a new broadband network I have only two choices: GSM and CDMA networks. WiMAX doesn't appear. Looks like Ubunto 10.10 "doesn't know" about the existence of the WiMAX technology. I sent some e-mails to the manufacturer but they never answered.
I friend of mine informed me to try the following commands:
sudo lshw -C network
lsusb
[code]....
View 4 Replies
View Related
Aug 7, 2010
I am doing Field Engineering work as a contractor for Clearwire 4G WiMax network deployment and was given a Motorola usbw 25100 network card and was told to use this with windows. I do not work as a IT consultant but rather a RF guy and am trying the avoid using windows by all means possible and was wondering if anybody knew how to set these cards up. Technical support does not support linux and will not help out in any way. Can anyone point me in the right direction? I used to use my Blackberry with verizon with Tethering and it worked great. I found this link but am a bit confused on the setup:
[URL]
View 1 Replies
View Related
Mar 26, 2011
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
View 13 Replies
View Related
Sep 1, 2011
Any easy way to stop the initialization of WiMax during bootup? I don't use Wimax and it noticeably slows down the boot up process.
Sony F-Series laptop running 10.10.
02:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5f)
View 4 Replies
View Related
Jun 2, 2011
I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing.
View 3 Replies
View Related
Jan 8, 2010
I just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
View 3 Replies
View Related
Jan 15, 2010
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
View 9 Replies
View Related
Jan 24, 2010
I have a ZTE USM Modem from 3 Tre Italy, on the tre.it network. The modem worked fine for a month or so. Yesterday I recharged the SIM and the modem has stopped working after midnight. Earlier, the modem would indicate a red light, and then turn to green, blink a few times, and connect on its own.
Now, it shows red, goes off, and then stays red constantly. I've tried putting the priginal PIN that came with the SIM into my Mobile Broadband settings in Network Manager to no avail.
[Code]...
View 5 Replies
View Related
Apr 17, 2010
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
View 9 Replies
View Related
Apr 19, 2010
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
View 1 Replies
View Related
Sep 6, 2010
I got a Gigabyte Gsmart MD800 3G/HSDPA Express card with a USB Adaptor. When you first connect it ... it picks up a CD-rom with the windows installation files and not the modem.
I followed the instructions here ...[url]
But the modem still does not appear in the network manager so i can create a Mobile Broadband connection using this modem.
View 1 Replies
View Related
Dec 28, 2010
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies
View Related
Aug 6, 2009
I have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
View 14 Replies
View Related
Nov 26, 2009
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
View 2 Replies
View Related
Jan 28, 2011
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies
View Related
May 11, 2009
I installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies
View Related
Mar 10, 2010
after yesterday's routine ubuntu update - allowing both security and recommended updates - i turned off my pc. turning it on today, it seems like my USB modem support is gone. i am using the "eciadsl-usermode_0.12-1_i386" package, and i get the message "/proc/bus/usb/devices: No such file or directory".i tried re-installing my eciadsl package, but got the same result.
View 2 Replies
View Related
Jun 25, 2010
getting a gobi un2420 internal 3g modem working in FC13?
View 8 Replies
View Related
May 7, 2009
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
View 1 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Mar 23, 2011
install lte $ wimax in ns-2
View 14 Replies
View Related
Apr 8, 2011
My project and compare the handover between WiMAX and LTE.I already properly installed ns-2.31 and the WiMAX module, and ns-2.33 and module lte.My problem is to have a script because I tested wimax handover l2handover but I do not know how to interpret the results file out.res.So I need a script handover Lte.even if that script works on ns-3 is good because I already installed ns-3.10.
View 2 Replies
View Related
Feb 23, 2010
I have installed Ubuntu long ago, and I just loved it =), but I have been quite disappointed about the drivers support of some components, for example: I have a USB Modem ZTE MF622, my ISP is TMN. I have read about people that have configured it Ubuntu 9.04 and with another ISP, but when it comes to Ubuntu 9.10, nothing appears to be working.
View 1 Replies
View Related
Jan 9, 2010
I am new in linux, have just installed ubuntu server 9.4 64bit ver and cannot get my usb modem mc950d to work.
View 3 Replies
View Related
