I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Repliesi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I am running Debian 6.0.1a on a Gateway SX-2841 (64-bit) and I would like to set up the Motorola SBV5220 modem using USB because the Ethernet port is used for a LAN (not on Internet). I am trying to follow the Cable Modem HOWTO. /var/log/messages lists CONFIG_USB_NET_CDCETHER=m, not exactly as shown in the HOWTO. lsmod does not list anything like either CDCEther or usbnet. I am hesitant to try running modprobe until somebody says this is the right thing to do.
View 7 Replies View RelatedI installed Ubuntu 10.04 into my compaq notebook. The problem is that I am not able to connect to my wired broadband internet.
Here are the details of my attempts so far:
1)"ifconfig -a" gave 2 devices eth0 and wlan0.
2)"pppoeconf" was unable to detect any ethernet cards.
3)Each time I plug in the LAN cable , the network icon would say "connecting" and ultimately result in "disconnected.Now in offline mode".My ethernet device is Realtek PCIe RT8101E/RTL102E (rev 02).
I also tried to install the realtek driver though I was not confident whether I did it correct.
All I want to do is transfer my pictures from my Motorola V3 RAZR to the Ubuntu 10.04 PC. Searching, I installed KMobileTools 0.4.3.3 from the "Ubuntu Software Center" as a Ubuntu 10.04 replacement for the Windows "Motorola Phone Tools". But when I attach my fully charged Motorola RAZR V3 to the Ubuntu 10.04 PC with a USB cable, I can't transfer my pictures from the phone to the PC using KMobileTools.
In fact, there doesn't even appear to be a MENU for transferring pictures from the Motorola RAZR V3 to the Ubuntu 10.04 PC in the KMobileTools application. What would you suggest for transferring pictures from the Motorola RAZR to the Ubuntu 10.04 Lucid PC?
I will try to set up the Motorola modem with Debian (Squeeze) using USB. I would like to use Ethernet for a LAN separate from the Internet connection.
View 5 Replies View RelatedI tried ubuntu and am very happy with the smooth running and clean interface. I am having trouble setting up my network connections. It seems that I am unable to connect to the internet via my broadband modem if I am connected to my LAN via wifi. I think I need to seperate the networks so that the internet traffic does look on the lan for [URL]. I don't think I have had this problem when I used much smaller distros where I had to set it up by hand.
I might need to add some details I am just not sure what is relevant. I only have a basic understanding of what is going on.
solution:
Solved in #ubuntu irc chan with help by erUSUL.
Just in case anyone else is searching for the same thing.
In network connections in the ipv4 settings tab I edited routes by clicking the button and checked the box next to: "use this connection only for resources on its network"
how can i install the faxmodem motorola sm56.i have 2yaers of search and i dont have the answer?
View 4 Replies View RelatedHow do I get information about the SIM card of my USB broadband modem, for example it's phone number, serial number and so on, in Ubuntu 10.04?Not about the usb modem itself - just the SIM card inside it.Is there a way to probe it from the terminal, like you probe for usb devices with lsusb?
View 3 Replies View RelatedI've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies View RelatedI am trying to switch to mobile broadband, Ubuntu 9.10, Huawei E1750 modem, provider Telia Sweden. So far I tried this:
(previous: tried to get started with an Option Icon 550 modem, but could not do it. Ubuntu froze completely, networkmanager refused to see the modem after this. Read somewhere that it is (next to) impossible with Ubuntu, but Huawei is a better chance. Maybe I changed some settings on the way, went and got a Huawei)
-connected modem, nothing happened
-rebooted to Windows Vista, installed modem
-rebooted to Ubuntu networkmanager sees the modem, when I select it, it gives a message 'GSM network, disconnected'
Also: Ububtu sees the usb stick as a folder
I tried to use multiple mobile broadband modems in ubuntu 10.10 and encounter a bug as follows:
When i plug in a new modem, all the attached modem is automatic go offline ( thus my connection is down), and try to redial back, sometime the redial is successful, sometime it's not.
It was working fine in ubuntu 9.10, plug in a new modem, all attached modems stay connected.
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedIs there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I've just installed Ubuntu 10.04 on a Dell Inspirion 1501 and I can't get the internet to work. I've tried configuring a DSL connection from System> Preferences> Network Connections and It doesn't recognize the password. On Windows it works just fine.
View 3 Replies View Relatedi am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI am using 10.04 and is trying to install the linux drivers for Nokia CS-10.However when I try to install the deb file, it doesnt work. The installation process starts then its starts another process then gives me the error which state I have to close the previous installer window.[URL]
View 1 Replies View RelatedHow to connect Ubuntu to the Internet through a broadband connection? I decided to give Linux a try, and I picked the Ubuntu variant. I have some problems with the Internet connection though. I have a broadband (modem-less) PPoE connection, and all the info needed in order for me to connect are the username and password (which I have).
View 2 Replies View RelatedI am trying to connect to the internet from command line. i issued the command nm-tool the output is
Device: ttyUSB0
Type:Mobile Broadband (GSM)
Driverption1
state:disconnected
Default:no
capabilities:
I also issued the command sudo iwlist ttyUSB0 scan it gives this as output ttyUSB0 does not support scanning
I also issued the command
sudo iwconfig ttyUSB0 essid "MTN DEFAULT"
iT GIVES THE OUTPUT
Error for wireless request "Set ESSID" (8B1A)
SET failed on device ttyUSB): no such device
How can one find out the essid value of a broandband network? How can i connect to the internet from command line for a broadband network?
i recently-ish bought a netbook, and a mobile-broadband toggle to go with it, and set it aside to use later. i promptly installed the Netbook remix on the laptop. Well, I goofed, and didn't notice until well after I bought the WAN toggle that it was made for windows.
so, I downloaded Wine in an attempt to run the start.exe and get my internet. the executable (and the entire drive, i found) are marked by ubuntu as read only. Is there anyway to change this to allow me to run the file? if i did, would it even work?
I have a multiboot system running several versions of linux which do not all use the same software for handling wifi connections or have the same kernel. They have all stopped being able to connect to the internet in the last few days. My Windows 7 set up still connects though it seems to be a slow to establish a connection.Could BT have changed something and if so what?
View 4 Replies View RelatedI just installed Ubuntu in my PC and I tried to connect to internet using broadband connection. I use a ADSL router with WiFi access point to connect with network and dial my username and password using my computer to connect to internet.I could so it easily on windows 7 from Network and Sharing center and Setting up new connection or network and connect to internet using broadband internet.How can i do it with ubuntu 11.04 ?
View 9 Replies View RelatedI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
iam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies View Relatedprobably I have screwed myself. I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote:
yum clean all; yum remove @preupgrade
It can detect my HUawei modem and creating an IP as well. But no Internet.
I am having broadband connection, I need to connect broadband internet through eth0. Please give me some use full information for configuring this.
View 6 Replies View RelatedI am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View Related