I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing.
View 3 RepliesI installed via APT GET Modeswitch form my ZTE USB wireless modem. I need to know which modeswitch option is correct, and how to get Ubuntu 10.10 Studio to detect the modem in the my computer option. It only seems to detect a storage device.Using a Dell Inspiron Laptop.The modem glows green as it should, but no detection and connection.
View 3 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
i'm having problems trying to get ubuntu to recognise my usb modem because its one of those "flip-flop"/"zero-cd" devices.okay so this is what is inside the usb-modeswitch.conf file
Code:
########################################################
# Huawei E169
[code]....
i've recently bought a ZTE MG880+ modem of reliance and since then i'm trying to establish a net connection in 9.10 but failed. As i was searching for a solution i came to know about wvdial and usb modeswitch;i dwnlded both the programs in XP and installed only wvdial because i couldn't install the usb modeswitch program. But still i was able to modeswitch with the following procedure,-
note down the idvendor & idproduct with lsusb
sudo chmod 777 /lib/udev/rules.d/61-mobile-action.rules
sudo gedit /lib/udev/rules.d/61-mobile-action.rules
changed the default idvendor and idproduct with my own e.g 0x19d2:0xfff5
saved the file in downloads folder with name 90-mobile-action.rules
moved the file to /etc/udev/rules.d folder
reboot
After rebooting when i again plugged in the usb modem the lsusb command showed that idvendor:idproduct=0x19d2:0xfffe.So i think that mode switching is done but still i'm unable to connect to internet
I am having one Huawei EC156 modem for my wireless broadband connection. Everytime when I boot the machine, I have to run the following commands in the terminal. The commands are as follows
Code:
cd /etc/usb_modeswitch.d
followed by
Code:
sudo usb_modeswitch -I -W -c 12d1:1505
I would be very grateful if I can have a launcher which run this script automatically in terminal by clicking on it.
Im using usb wimax modem for qubee. its web address is [URL]
in terninal after giving the lsusb command i get the following output
sanjoy@ubuntu:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
after that I give dmesg>output.text so a text file I goet which is attached. output.zip
Imagine this scenario at my home: I'm working on my laptop using WLAN receiver as I have a router installed at my home. Suddenly the electricity fails (it's a regular incident here in Bangladesh called Load-shedding) and the power source to modem and router dies.As a result, my internet connection drops. To connect to the internet without power, I use this QUBEE UH-235 WiMAX USB Modem. Now I know QUBEE may not be there in your country. But after a bit of research I figured that this UH-235 modem is commont every country. QUBEE just branded its logo on the device and the software within.This one is not my device, mine is here.
In my windows, the software is installed as soon as I plug in the USB. That software then detects the modem, scans for network, and then connects to the internet. No extra CD is required for this. However, on an Ubuntu machine, I can't get it working. I guess there are ways to get this UH-235 modem working on my Ubuntu machine. This is keeping me from using Ubuntu as you know I'll have to restart and log in to WIndows whenever electricity is off as Ubuntu works with Wi-Fi, not this UH-235 modem when the Wi-Fi is out of power
I just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
I have a ZTE USM Modem from 3 Tre Italy, on the tre.it network. The modem worked fine for a month or so. Yesterday I recharged the SIM and the modem has stopped working after midnight. Earlier, the modem would indicate a red light, and then turn to green, blink a few times, and connect on its own.
Now, it shows red, goes off, and then stays red constantly. I've tried putting the priginal PIN that came with the SIM into my Mobile Broadband settings in Network Manager to no avail.
[Code]...
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
I got a Gigabyte Gsmart MD800 3G/HSDPA Express card with a USB Adaptor. When you first connect it ... it picks up a CD-rom with the windows installation files and not the modem.
I followed the instructions here ...[url]
But the modem still does not appear in the network manager so i can create a Mobile Broadband connection using this modem.
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies View RelatedI have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies View RelatedI installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies View Relatedafter yesterday's routine ubuntu update - allowing both security and recommended updates - i turned off my pc. turning it on today, it seems like my USB modem support is gone. i am using the "eciadsl-usermode_0.12-1_i386" package, and i get the message "/proc/bus/usb/devices: No such file or directory".i tried re-installing my eciadsl package, but got the same result.
View 2 Replies View Relatedgetting a gobi un2420 internal 3g modem working in FC13?
View 8 Replies View RelatedI have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
I have use ubuntu for about 1 year.And i want to learn slackware.so I install slackware 13.1 in to my laptop.Then i try to connect to internet using my Huawei HSDPA mobile 3g dongle.Then i install usb modeswitch after reading several documentation in the internet.I follow the instruction in following documentation and try to configure etc/usb-modeswitch.conf using vi. But my usb-modeswitch.conf file is as follow and don't now how to configure.
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
# This file is evaluated by the wrapper script "usb_modeswitch_dispatcher"
[code]....
How-to install usb-modeswitch under Lenny?I cannot find it using apt-cache search.
View 2 Replies View RelatedI use a ZTE 626 USB modem to connect to the internet (and yes, i am in the wilds of nowhere!) which using USB-modeswitch 1.1.0-2 and ubuntu 10.04 works well.
I just upgraded one machine to 10.10 and it included the new modeswitch 1.1.4 which does not work, the modem is never discovered. I searched around and found that this is a bug in the latest modeswitch and apparently if you back down to version 1.1.3 it works.
So, i have two questions,
first, where can i find version 1.1.3 of modeswitch. I have searched and cannot find older version than 1.1.4 as a .DEB file.
second, i do have a really old version of modeswitch (1.1.0-2) on my hard-drive and have been trying to load my older 1.1.0-2 version and am having real problems with it. I remove the 1.1.4 version and its data using the ubuntu software centre and it looks like it properly is removed. I then click on the .DEB file that contains 1.1.0-2 and it opens the software centre and installs it (the data seems to be automatically loaded as i never have to install that). I then search for modeswitch and the version that has been installed is the newer 1.1.4 one, not the older one i clicked on. I am confused as this computer is not attached to the internet but it seems to find the newer version from somewhere, uses it and therefore does not work. I presume the version 1.1.4 is cached somewhere and i am not able to clear it out.
Incidentally, the source of the information that i have so far is here:
[URL]
From reading this, i do understand that there is a problem, After reading this bug fix I tried editing the config file for the modeswitch modems and changing all of them to the format indicated, but no joy.
I have installed Ubuntu long ago, and I just loved it =), but I have been quite disappointed about the drivers support of some components, for example: I have a USB Modem ZTE MF622, my ISP is TMN. I have read about people that have configured it Ubuntu 9.04 and with another ISP, but when it comes to Ubuntu 9.10, nothing appears to be working.
View 1 Replies View RelatedI am new in linux, have just installed ubuntu server 9.4 64bit ver and cannot get my usb modem mc950d to work.
View 3 Replies View Relatedi delete windows a while back, but i have received a new modem from my telco, it has i disk with it that won't work on ubuntu so i need to either get the modem working or recovery my whole system and start again, the old 2wire work straght up so this might if i install it in windows and install ubuntu again, the problem is when i start the windows vista recovery wizard, it starts to format and i get an error 0x400110020000100A, the modem is a thomson TG782T
View 7 Replies View RelatedI'm new to ubuntu. I'm trying to get my US Robotics external serial modem working so I can use Ubuntu.
I copied
wvdial & dependencies:
libuniconf4.6
libwvstreams4.6-extras
libwvstreams4.6-base
to a flash drive.
How do I get them to /var/cache/apt/archives? I tried to copy and drag&drop wont work.