I got a Gigabyte Gsmart MD800 3G/HSDPA Express card with a USB Adaptor. When you first connect it ... it picks up a CD-rom with the windows installation files and not the modem.
I followed the instructions here ...[url]
But the modem still does not appear in the network manager so i can create a Mobile Broadband connection using this modem.
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
I use O2 HSDPA USB modem to connect Internet. I think theirs no Brand for it. (Unbranded O2 dongle)
Its successfully working in Windows7. But I cant connect to the internet using the same dongle on Fedora13
I tried USB modswitched and also the Sakis3G script...but no effect..
Below are some information I got after executing lsusb on bash.
Bus 006 Device 002: ID 1c9e:6061
My D-link DWM-152 HSDPA USB modem is not in the USB_modeswitch supported hardware list and ubuntu was recognized it as USB storage. Any idea how can i switch it to modem mode? I'm using ubuntu lucid.
View 3 Replies View RelatedI am trying a 3G HSDPA USB Modem inUbuntu 10.04. It detects it as a CD Drive.
When I tried to 'Safely Remove Drive'
I got the following error:
Quote:
Unable to stop drive
Error detaching: helper exited with exit code 1: Detaching device /dev/sr1
USB device: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2)
SYNCHRONIZE CACHE: FAILED: No such file or directory
[Code]....
I am running Ubuntu 11.04. When I try to connect t-mobile(USA) modem dongle to my computer, I get this error in dmesg.
My comuter is Lenovo Y460p Core i7 2630M, 8 GB Ram, AMD Graphics.
For F10 patched. I'm in Honduras. The local cell / Internet provider that covers Guatamala, Honduras, El Salvador, uses an HSDPA modem marked "GBC" and is also known as the "China Bird". It's a black usb stick that looks identical to the option unit, but its definitely not an option modem.
lsusb lists it as 1c9e:1001 with no text after it. It automounts as a disk drive with typical Windows software on it. Nothing ever shows up in /dev/ttyUSB*, as I believe the disk mount causes it to not try mounting it as a modem. Dismounting it also does no good.
I recently got a HUAWEI E1630 HSDPA USB Modem and it was working fine until recently. Recently it starts to drop the connection and in /var/log/messages I can see a pppd error "Protocol-Reject for unsupported protocol xxxx". The protocol number is random. Only way to resume is to unplug and replug the device. The happens very frequently and hence the device is not usable.
To isolate the service provider end, I use the same SIM on a PROLINK HSDPA USB Modem and it works fine. Also I use a different SIM from another service provider in this device and the issue still exists.
I am on Kubuntu 10.10 with all the updates to date. Should I report a bug?
I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
I've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
I'm new to opensuse as well linux.today i installed suse 11.3 and installation completed.then i plug the usb modem (ZTE mf 100) and then nothing appears..i dont know what to do for configure the modem.
View 2 Replies View RelatedInstall ZTE HSDPA USB MODEM (Model : MF626) at ubuntu 8.10
View 1 Replies View RelatedI have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
The USB stick modem stated in the title came with a software for Windows and Mac operating systems. The manufacturer is ZTE corporation, China. Is there anyway I can get the drivers and software for Fedora Linux.
View 5 Replies View RelatedI have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedI have just moved over from MS to Linux and so far I am pretty happy (couple of frustrations along the way, but nothing I could not sort out so far).
Except this little bit that has me bogged down. I am trying to get my HS2300 HSDPA wireless modem to work, but I am a little stuck here.
I found a post that I should get the HP-WMI module to load. That was a post on an older kernel and this guy mentioned that is should be included in newer versions of the kernel.
Modprobe did not deliver any results, however an "lsmod |grep wmi" delivered the following:
Obviously I need to look for hp_wmi, but so far I cannot get anything to work.
glad to be in the company of ppl that share the same interests i do.recently installed ubuntu 9.04 on a toshiba satelite pro laptop that had no os n it all.i also have this vodafone usb modem id like t use with it,but ive no clue on how to configure it to the laptop to use for web access.when i plug the usb modem into my win xp desktp,it works rite out the box.id like to make a permanent move frm windows to linux os.
View 2 Replies View RelatedIm using usb wimax modem for qubee. its web address is [URL]
in terninal after giving the lsusb command i get the following output
sanjoy@ubuntu:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
after that I give dmesg>output.text so a text file I goet which is attached. output.zip
Imagine this scenario at my home: I'm working on my laptop using WLAN receiver as I have a router installed at my home. Suddenly the electricity fails (it's a regular incident here in Bangladesh called Load-shedding) and the power source to modem and router dies.As a result, my internet connection drops. To connect to the internet without power, I use this QUBEE UH-235 WiMAX USB Modem. Now I know QUBEE may not be there in your country. But after a bit of research I figured that this UH-235 modem is commont every country. QUBEE just branded its logo on the device and the software within.This one is not my device, mine is here.
In my windows, the software is installed as soon as I plug in the USB. That software then detects the modem, scans for network, and then connects to the internet. No extra CD is required for this. However, on an Ubuntu machine, I can't get it working. I guess there are ways to get this UH-235 modem working on my Ubuntu machine. This is keeping me from using Ubuntu as you know I'll have to restart and log in to WIndows whenever electricity is off as Ubuntu works with Wi-Fi, not this UH-235 modem when the Wi-Fi is out of power
I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing.
View 3 Replies View RelatedI just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
I have a ZTE USM Modem from 3 Tre Italy, on the tre.it network. The modem worked fine for a month or so. Yesterday I recharged the SIM and the modem has stopped working after midnight. Earlier, the modem would indicate a red light, and then turn to green, blink a few times, and connect on its own.
Now, it shows red, goes off, and then stays red constantly. I've tried putting the priginal PIN that came with the SIM into my Mobile Broadband settings in Network Manager to no avail.
[Code]...
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies View RelatedI have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11