Fedora Networking :: Dial Up Modem Not Working
Aug 6, 2009
I have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
View 14 Replies
ADVERTISEMENT
Jan 8, 2010
I just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
View 3 Replies
View Related
Feb 23, 2009
My brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Feb 17, 2011
It's been a while since I've logged into this forum, but I'm back to using openSUSE, and my experience with this OS has so far been quite pleasant. I have a U.S. Robotics Dial-up modem, model USR5637, that I've used with other linux OS's, such as Ubuntu, Fedora, and Puppy, but I haven't had any luck using this modem with openSUSE. This is a full hardware modem.
Usually, when using this modem on a new Ubuntu system, I got into the terminal, type "lsmod" and then "modprobe cdc_acm" and the modem begins to work. However, in openSUSE this is not the case. I'm using Gnome and KDE, with kppp, and I'm unable to connect to the internet. Is there a way of installing this modem that I am overlooking?
View 9 Replies
View Related
Feb 19, 2010
I'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
View 1 Replies
View Related
Jan 1, 2010
I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies
View Related
Apr 20, 2011
I have been working for the last week trying to connect my serial hardware external modem (courier 56K v.everything) within an Ubuntu 10.4 environment. I live in the boonies where I am presently forced to use dial up, so this has got to work, else I cannot update Ubuntu or download software. After trying various suggestions, which my very limited Linux skills fail me, I opted for the suggestion that I download gnome-ppp, install and then use it. Seeing how I cannot download it through Synaptic Package Manager (which I was advised to but can't as it is my Linux computer that I am trying to connect).
I downloaded the zipped file (gnome-ppp_0.3.23_Oubuntu2.tar.gz ) to a USB stick, copied it to the home directory and then extracted it, wherein a new directory was created with many files in it. From here I have been unable to install it through the command line (not sure how), nor have I been able, as was suggested, to install it via the Synaptic Package Manager (can't get it to see the file, not sure how to). I need explicit (Newbie) instructions on how either to connect the modem without gnome-ppp, or instructions on how to get gnome-ppp installed.
View 6 Replies
View Related
May 14, 2010
i'm trying to install zoom 3095 usb dial-up modem on my laptop which has ubuntu 9.10 on it but i got an error
Where is the linux source build directory that matches your running kernel?[lib/modules/2.6.31-21-generic/build]
Building modules for kernel 2.6.31-21-generic/build, using source directory lib/modules/2.6.31-21-generic/build. Please wait...
ERROR: Module build failed! Please examine the log file "/tmp/dgcconfig-buildlog.txt" to determine why.
dgcconfig-buildlog.txt said:
(cd /lib/modules/2.6.31-21-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.31-21-generic/build" "M=/usr/lib/dgcmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-21-generic'
[Code]....
View 5 Replies
View Related
Feb 25, 2011
I tried Gnome-ppp but terminal can not find it! Retired can only afford cheap dialup.
Where can I get a version of ubuntu that has system -> administration-> networking?
View 1 Replies
View Related
Feb 22, 2010
After much work finding the bits and bobs to get my PCI controller based modem working in Ubuntu 9.10, I need a better way to start and stop it. Now it dials up when I reboot whether I want to be online or not. I can stop this, but it won't dial up again without a reboot.
I would love a way to push a button to get it to connect and disconnect, and blinking lights (like the green computer screens in WinXP) to tell me when I am communicating. Even better would be a way to set up multiple connections, again like in XP so I could use a variety of numbers and/or user names depending on where I am.
View 1 Replies
View Related
Jun 12, 2009
I want to use my nokia 6233 as a dial up modem in fedora 10.
View 1 Replies
View Related
Oct 10, 2010
I just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
View 1 Replies
View Related
Feb 2, 2010
I have the Linux bible however am finding it impossible to get online. I have dial-up (Rosewill USB) I just installed FC12. It cannot find the modem. First, do I need a driver, where do I find it. It is not a winmodem. I am very excited to get away from Microsoft and their monopoly but I just need to get online.
View 2 Replies
View Related
Apr 9, 2010
I use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
View 3 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Nov 26, 2009
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
View 2 Replies
View Related
Jan 28, 2011
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies
View Related
Jun 12, 2010
I have an external usb dial up modem. lsusb shows: Bus 001 Device 002: ID 2001:f10d D-Link Corp. [hex] Accent Communications Modem How do I set this up? It probably needs a driver, how do I check it, or better yet, can I get yast to tell me if it recognizes the modem or needs firmware? I know linux and dial up is like the seventh circle of hell. Just wondering if there was a snowball's chances of getting this working. Sorry if this is the wrong section to ask in. Seemed like as good as any when I checked.
View 9 Replies
View Related
Jun 28, 2010
I have a US Robotics serial modem, and I have smpppd enabled in system services, with wvdial and kppp installed. When I try to set the modem up using yast, I keep getting hung up by the different screens. First a screen that asks if I need to dial a number to get out. I have to dial 9, so I have that entered. Then a screen that asks for "country" and "provider."
When I try to enter anything, nothing shows in the boxes, so I go to a screen that asks for the phone number, provider, user name and password. When I enter those, it goes to a screen that wants "Connection Parameters", with default settings and the "buttons" at the bottom of the screen "muted," or flattened out, i.e. unusable. That makes it impossible for me to set the information as saved, so it's back to the beginning and sart over, with the same results over and over. How do I get the modem so it dials out?
View 9 Replies
View Related
Apr 27, 2010
One of my clients brought a laptop to me with a 64 bit processor and wanted to hook up his zoom 3095 usb dial-up (56k) modem to a his laptop using ubuntu 9.10 AMD 64 bit version. We quickly found out that zoom has only made 32 bit drivers for linux. So...I need to find a usb modem that has drivers that will work with a 64 bit version of ubuntu 9.10.
View 1 Replies
View Related
Mar 13, 2011
I have only a dial-up connection. I've been using the 32-bit version of WVDIAL and its associated programs in Karmic Koala for over a year. I recently finally got around to installing Maverick Meerkat on a different drive. The 64-bit version. I see that I need the 64-bit version of the modem software, and I haven't found it right away. Where can I get it? The programs required under 32-bit Karmic Koala:
libwvstreams4.6-base
libwvstreams4.6-extras
libuniconf4.6
wvdial
All of these had .deb filename extensions. Also, largely because I only have a slow dial-up connection, I don't have any updates for either Karmic Koala or Maverick Meerkat installed. If you happen to know that I absolutely need some particular update(s)
View 2 Replies
View Related
May 14, 2011
I'm trying to get dial up working using wvdial, kppp or system-config-network. Whatever I try, it shows "no modem found." I'm using a US Robotics serial modem that's worked with other linux set-ups, so I know it's not the modem. What's the command to find a serial modem in the terminal? lspci doesn't show it.
And any info on getting any of these to work..especially system-config-network! Had it working with linux Mint's LXDE on an older Thinkpad, but something happened after an up date (kept saying that an IBM system was detected and refusing to load a module when it booted.) After update, didn't show that warning, perhaps loading the module.
Old Thinkpad hasn't loaded an operating system since! Won't even load gparted so I can get something else on it.....so I'm sticking with Fedora until I can figure it out. Got another old Thinkpad, don't want to repeat the same mistake. Guessing that it's a debian problem, as Mint's never broken anything before.
View 14 Replies
View Related
May 12, 2010
After >15-yrs using MSWindows, I'm getting a new PC with Ubuntu as my OS. This is for typical home use--net access, web browsing+email, office suite apps.
[code]....
I've read and bookmarked various info on configuring modem, including PPP and wvdial info. But one question: Is there a particular version # of Ubuntu best for external dial-up modem use? I have the CD for 9.10 Desktop edition. It seems that different Ubuntu versions include some things, others not. Another Q: Reading this page about wvdial, it refers only to serial modems. Does the info apply to USB modems, like the USRobotics 5637? [URL]
View 4 Replies
View Related
Jun 25, 2010
getting a gobi un2420 internal 3g modem working in FC13?
View 8 Replies
View Related
Mar 31, 2010
working and installation of External usb modem , dialp , DEll d400 ( in vostro 1510 )
View 8 Replies
View Related
Oct 24, 2010
I'm trying to produce a dial-tone from my modem with Mgetty. I found this online: I recently discovered a feature that's part of the command set of some voice modems that enables it to produce tones. The latter is of interest to us since the US dial-tone and others are a combination of two frequencies (440Hz and 350Hz in the US). Below is an ordered list of AT commands that initialize the modem, produce a dialtone for 2.5 seconds and answers the call. To check if the "AT+VTS" command is supported, or to get the parameter value ranges supported by it, use "AT+VTS=?"
[code]...
View 9 Replies
View Related
May 7, 2009
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
View 1 Replies
View Related
Feb 28, 2010
Are there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies
View Related
Jul 11, 2009
Trying to set up a modem connection under FC11, using the applet under System/Administration/Network/Add gives the following error:
Code:
Local variables in innermost frame: If the script is faulty, could you guide me through setting it up by hand? I am required to be away from my normal location for a few weeks starting Monday and need to keep in touch.
View 2 Replies
View Related
