i have problem with my modem zte ac682, i used ubuntu 10.10 and when i configuration my modem with wvdial my modem was not detected, this is my configuration
1. lsusb
2. sudo eject /dev/sr1
3. sudo modprobe usbserial vendor=0x19d2 product=0xffdd
4. sudo wvdialconf( in this step my modem was not detected)
Recently i got bb internet connection, how to configure my linux pc to internet using DSL modem i.e in bridge mode.
View 4 Replies View Relatedhow configure E1550 Huawei modem in Ubuntu9.10.
View 1 Replies View RelatedWhen I type my modem configuration page IP in browser instead of showing configuration page it shows default web page for apache.What's wrong?Is there any IP conflict?
View 1 Replies View RelatedI m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. i want to ask how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not and if the answer is yes or no how comes !
View 1 Replies View RelatedI have configure a UTL modem in fedora 14.
First I confiigure /etc/wvdial.conf file(wvdial is installed)
As:
Then i enter wvdial but i got error as:
To configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have a CentOS system running. I want to get mail off it to my yahoo account.
I did a test mailx command and it goes out of the queue but never gets to my yahoo mail.
I am using a cable modem.
I can go out to the Internet so I know I have a valid connection.
I am guessing I need to set something up so the cable company will relay my mail for me.
I know i can pull pop mail down and sen it using my account.
Do I need to configure something in the sendmail.cf file to do this?
I just went into my email and say this ...patial msg included...
(reason: 553 5.7.1 [BL21] Connections will not be accepted from 98.249.136.1 9, because the ip is in Spamhaus's list; see [url])
I just configured my system to be a mail server after following this howto URL...Normally before the configuration i use a huawei E1550 to browse on it but now it no longer works.It connects to the internet but refuses to browse.I cannot open any webapge or site for now.I suspect it has to do with the shorewall configuration i must have changed that has caused this.
View 1 Replies View RelatedAnyone has difficulty in configuring the USB modem Huwaei 1260. I'm using photon plus broadband connection. Here's how I configured it.
Here the vendor id is 12d1 and the product id is 140b.
Now you have to do a modprobe.
Run wvdialconf as below.
Scanning your serial ports for a modem.
Found a modem on /dev/ttyUSB0.
The modem configuration will be written in /etc/wvdial.conf as below.
Make changes as below to the /etc/wvdial.conf
Run wvdial
Wow You are on to the net.
If your browser gives problems loading the pages add the nameservers in /etc/resolv.conf as below.
Then run the browser, there should not be any problems.
I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
View 5 Replies View RelatedIts my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
View 2 Replies View RelatedHow do I configure my modem without setting a service provider? When I try to configure my modem I can't get past the page for setting my internet provider. I have DSL and only use a modem for faxing. I'm running SUSE 11.3 32bit with KDE 4.5.2 and the modem is a BCM4212.
View 4 Replies View RelatedI recently got an upgrade from my mobile broadband provider (3 UK) that included a ZTE MF112 modem. I found that (unlike the Hauwei modem that preceeded it) this item did not work "out of the box". After a bit of googling around I decided that a good starting place would be to upgrade the OS on my laptop. I've been meaning to do this for a while anyway so have just installed Squeeze (the i386 version, on Thinkpad x61). I think it's now pretty close to working "out of the box" but annoyingly isn't quite there. I thought of getting a ZTE modem to work say that usb-modeswitch needs to be used to make it not load as a cdrom. However, it appears to load correctly without any alteration (in fact, adding the /etc/udev/rules.d/zte_eject.rules file I have found described appear to do the reverse and make it load as a storage device - at least an icon for it appears on screen).
lsusb correctly lists it as device 19d2:0031 and identifies the device as a ZTE MF636 (though it says MF112 on the package). Looking at the Network Connections tool there is an entry for 3 mobile that is, afaik, correctly configured. If I click on the network applet on the toolbar, there is a bit of contradiction: towards the top of the drop-down list it reports mobile broadband as not enabled, but further down under the "available" list is an entry for "3 internet". I haven't paid too much attention to the not enabled entry because it also reports the wired network as not managed, so maybe this is just a quirk of network manager. - I know you have to comment out eth0 entries in /etc/network/interfaces to have network manager deal with the interface in Squeeze. There are no entries for the mobile connection in the interfaces file.
If I click on the 3 internet entry the applet goes momentarily into trying to connect mode (the circling dot) but very quickly pops up a Disconnected box, and that's all that ever happens. I note that the light on the modem stays permanently red. On the old Huwei it started green but went blue, and I think I read something about it also changing colour on the ZTE. On the other hand, the Hauwei didn't show up on the network manager list until the light had turned blue, whereas this does seem to be there. It looks as if the problem is something fairly trivial since the device appears to be both recognised and (almost!) correctly configured. How to sort this.
I have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.
A few details:
- I'm using debian unstable,
- latest NetworkManager 0.8.2-3 from experimental
- latest modemmanager 0.4+git$foo from testing
- latest usb_modeswitch[_data] from experimental
[Code]....
I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1
[code]....
I�m trying to configure Centos-server 5.5 to work with Hylafax software and a modem card that as an Ambient MD3200 chip. Lspci detects the card:
[Code]..
I am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.
I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb
[code]....
in all these cases hsfconfig failed with the above error,
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedMy modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies View RelatedI have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies View RelatedI'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk
Username: user
Password: pass
I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
i m able to change mode to usb modem device 9603 Micromax 300 G USB modem.
but still got stuck with
bharat@ubuntu:~$ sudo modprobe usbserial vendor=0x1c9e product=09603
FATAL: Error inserting usbserial (/lib/modules/2.6.31-14-generic/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
