Fedora Networking :: Configuration Of Wireless Modem In14
Feb 14, 2011I have configure a UTL modem in fedora 14.
First I confiigure /etc/wvdial.conf file(wvdial is installed)
As:
Then i enter wvdial but i got error as:
ADVERTISEMENT
Fedora Networking :: Wireless Modem Connectivity Loss ?
Dec 10, 2010The problem is I have a wireless Belkin router which I can connect to, but after being connected for a few minutes the net disappears (cuts from the router) and my laptop will have to reconnect again to the router for internet to work again. After a few minutes (or seconds in some cases) the connectivity loss will happen again over an over.
How to fix this problem or some things I can try, I've tried updating to two different firmwares, two different channels and resetting the router. The biggest problem I find is that this happens on both my laptop, another laptop in the house and also my tablet PC but doesn't happen on two other laptops in the house, I've also tested with windows 7 and Ubuntu with my laptop.
My laptop wireless card is Atheros AR9285 802.11b/g/n WiFi Adapter
Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7
Jul 29, 2010how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies View RelatedDebian Configuration :: Unable To Make Huawei E1750 Wireless Modem Work With Lenny
Oct 10, 2010I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1
[code]....
Networking :: Internet Configuration Through Dsl Modem
Sep 4, 2010Recently i got bb internet connection, how to configure my linux pc to internet using DSL modem i.e in bridge mode.
View 4 Replies View RelatedUbuntu Networking :: Configuration Modem Zte Ac682 In 10.10?
Jul 14, 2011i have problem with my modem zte ac682, i used ubuntu 10.10 and when i configuration my modem with wvdial my modem was not detected, this is my configuration
1. lsusb
2. sudo eject /dev/sr1
3. sudo modprobe usbserial vendor=0x19d2 product=0xffdd
4. sudo wvdialconf( in this step my modem was not detected)
Networking :: Modem Router Configuration In Centos5
Jan 25, 2011I m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. i want to ask how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not and if the answer is yes or no how comes !
View 1 Replies View RelatedUbuntu Networking :: E1550 Huawei Modem Configuration?
Mar 17, 2010how configure E1550 Huawei modem in Ubuntu9.10.
View 1 Replies View RelatedUbuntu Networking :: Cannot Access Modem Configuration Page
Dec 29, 2010When I type my modem configuration page IP in browser instead of showing configuration page it shows default web page for apache.What's wrong?Is there any IP conflict?
View 1 Replies View RelatedFedora Networking :: Wireless Configuration Does Not Show Up In System-config-network
Sep 1, 2010This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies View RelatedNetworking :: 3g Wireless Modem Not Recognised
Sep 27, 2010I have a 3g data card(LW272 GSM/WCDMA USB Modem with HSPADataCard) which is a type of multi-mode, 3G modem or card, applicable to 2G/3G networks; but it doesn't get recognised in Ubuntu 9.10. Actually, this device came with a software(for linux too) which makes calls and sms possible simultaneously while surfing. But while installation(from root terminal) i see a repeated trials of connecting to modem but it does not find the device(something wrong in installation), and the interface of the software also shows "No(U) Sim". Anyhow it doesn't bother me much if i m not able to avail the additional services( call and sms), but what i need is to make the modem recognisable so that i could configure the connection.
View 3 Replies View RelatedUbuntu Networking :: Can Not Use A Wireless Modem Huawei 160
Jan 15, 2010ubuntu I can not use a wireless modem huawei 160.type can only be used in windows.well to be used in my ubuntu linux? whether there is a script that used.
View 2 Replies View RelatedUbuntu Networking :: Can't Connect To Wireless Modem
Apr 8, 2010My wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies View RelatedUbuntu Networking :: Setting Up Wireless Modem In 10.10?
Jan 1, 2011I installed 10.10, I'm using a HP tower with a cisco usb ae1000 modem. I have been on Linux all of 12 hours. I had installed on a old laptop, and hard wired to the router. I really liked the OS. And Long short I killed the laptop, literally.
So I partitioned the family tower, but I cannot connect wirelessly. And to run hard wire to the router would mean a complete tear down of my desk and set up in the living room area, and that will not help out the marriage long/short term.
on the internet connection and I gone through the panels trying to set up the connection but no luck. I'm running Vista and Ubuntu 10.10. I using vista to post here now.
How do I get it to find the wireless router and set up my connection without being hardwire to the router itself.
Ubuntu Networking :: Connecting 3 Wireless Modem Via USB?
May 22, 2011I've recently installed Natty and the only problem I have with it so far is attempting to connect my Huawei E5830 Three Wireless modem via USB and successfully connecting to the Internet from it. I've fiddled around with the network settings and nothing, I've also done some work in the Terminal to try and correct the problem.
View 1 Replies View RelatedUbuntu Networking :: Connect To A Wireless Modem?
May 26, 2011i have a samsung laptop.i recently installed ubuntu 11.04 on it.
I have a huawei WA1003A modem .In windows i connect to my modem wirelessly using (WLAN) facility after connecting it shows it has limited connectivity with the modem and then i connect to BSNL using username and password..then i get connected to internet..
In ubuntu I conncted to internet using the cable by making a new dsl connection i provided my user name and password. and then i switched on the modem connected the cable and connected to dsl connection and internet was connected.. . i want to connect it wirelessly.
Ubuntu Networking :: 3G USB Modem, In And Using Wireless Router Out To Lappy, Wii Ect?
Feb 7, 20103G USB modem, in and using wireless router out (via ethernet) to lappy, Wii ect.We don't have a phone line just mobile phone and mobile internet because it is mobile.I have a wireless router only but need wireless to improve my standing within the house because I am seen as a net hog!
I did come across a Virgin wireless modem but it is soooo painfully slow (tested it against the USB dongle modem 3-4kb same test 1 min later 280-300kb's USB.) The wife could make herself a cuppa just waiting for the facebook login page to load!Would it need to pass on the connection bcause the USB is fully setup? then wireless is setup or would it be required to have a 3rd security setting ect in between?It would be good to use a low spec computer because I have a few. Headless too, maybe?
Ubuntu Networking :: VZ Wireless Modem Card Setup
Jun 15, 2011I have had a vz modem card for some time now and it worked fine. However my employer upgraded from a PC5750 device to the new PC770 device. When I plug the old device (now deactivated) it shows and use to work fine. When I plug the new device in Ubuntu does not pick it up and show it in the networking options. I use to see it i n the upper right where I would select my wireless networks. I do get a green light on the card so I know its powered. So what do I need to do to get my Laptop to see the new card?
uname -a Linux mylt 2.6.32-32-generic #62-Ubuntu SMP Wed Apr 20 21:54:21 UTC 2011 i686 GNU/Linux
Ubuntu Networking :: Wireless USB Modem Not Detected Every Time?
Jul 13, 2011I am using Ubuntu 11.04 and a Huawei USB modem to connect to internet. Most of the time when I start computer it is not detected my system. Then I use to reboot and then it gets detected automatically. That means its drivers are now loaded. But I don't know why drivers are not loaded when I start first time.
View 1 Replies View RelatedUbuntu Networking :: Remote SSH With Both DSL Modem And Wireless Router
Jul 28, 2011I have an Ubuntu server that I need to access remotely while I am at school. The server's internet connection comes first through a DI-604 broadband router and then through a Netgear Wireless router:
ethernet wall jack --> Broadband Router --> Wireless Router --> Server's ethernet port
I can manage to get the SSH to work with the current IP address (dynamic) by connecting the server directly to the broadband router, but I cannot set up DNS (ddclient on the server, Namecheap for domain registrar and nameserver) with it. I can set up DNS on the router with no issue, as it has the DNS client built in, but I cannot get the SHH to connect through both the modem and the router as mentioned above. Best case scenario, this can be fixed without having to get anything new, but if that is the case, recommendations of a new setup
Other reference info - ISP at server is Verizon Fios, broadband router set to PPPoE.
Ubuntu Networking :: Internet Through Modem Works But Not Through Wireless Router?
Jan 22, 2010I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem. I just need to know how to configure my modem so that it works with my wireless router (D-Link DI-524).
I have a long wired ethernet wire to satisfy my academic needs for the internet at the moment but my mother is not able to surf the internet and it would be more convenient for myself to put the wire back to my desktop and have my laptop browsing wirelessly.
Ubuntu Networking :: Internet On 8.04 /CT-301 Modem - Connect To Wireless Connection
Jan 28, 2010Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
View 1 Replies View RelatedUbuntu Networking :: USB Wireless USB Modem From The Command Line Termianl Only?
May 14, 2010Without Gdm (The GUI Desktop running), or an Internet connection, how does One get pppd or wvdial to connect to a wireless broadband modem?I'm SURE this can be done with any modern Distro without additional downloads...but seem to be missing some crucial step...? I've been trying things like: (scrips for pppd and chat and ln {links} ttyACM0 to /dev/modem?) the modem is definitely on ttyACM0.
ln -sf /dev/ttyACM0 /dev/modem
/etc/ppp/chat-script
#!/bin/sh
[code]....
Ubuntu Networking :: Wireless Internet Modem (USB) And A LAN Ethernet - Connect To Both At The Same Time?
Jul 22, 2010I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies View RelatedUbuntu Networking :: Install Sprint Mobile Broadband Novatel 3G Wireless Usb Modem?
May 7, 2010How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies View RelatedUbuntu Networking :: Connecting To The Internet Through A Lynksys Wireless G Router And A Cable Modem?
Aug 6, 2010i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
Fedora Installation :: How To Install Wireless Isdn Modem On FC4
Jan 29, 2009I have FC4 installed on my system and my internet connection is a ADSL through a Router but i have a wireless isdn line as backup connection the modem i use is LG LSP 340E which is a limited mobility cdma phone with in built modem, the supplier and manufacturer has given drivers for windows only. How to install this modem onto my system, I had tried auto detection but it didn't work, I had connected the modem to the serial port in my system.
View 2 Replies View RelatedUbuntu Networking :: Dialup Modem Computer As Internet Sharing Gateway To Wireless Access?
Mar 4, 2011I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
Debian Configuration :: Kannel Configuration For Huwei GSM Modem
Jan 24, 2011To configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
Fedora Hardware :: Install Modem Sierra Wireless AC775 On Core 6?
Apr 26, 2010how to install the modem Sierra Wireless AC775 on Fedora Core 6. Fedora 6 detects the modem, but does not establish it as a device. And no entries in the directory /dev about modem. Startup Fedora 6 said that the initialization eth1 failed because no device serial_cs.
View 3 Replies View Related