Ubuntu Networking :: Modem Cannot Detected In 9.10
Jan 12, 2010My modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Dial Up Modem Is Not Detected
Jan 1, 2010I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies View RelatedUbuntu Networking :: D-link DWM-152 HSDPA USB Modem Not Detected ?
May 8, 2010My D-link DWM-152 HSDPA USB modem is not in the USB_modeswitch supported hardware list and ubuntu was recognized it as USB storage. Any idea how can i switch it to modem mode? I'm using ubuntu lucid.
View 3 Replies View RelatedUbuntu Networking :: 3G HSDPA USB Modem Detected As CD Drive?
Aug 29, 2010I am trying a 3G HSDPA USB Modem inUbuntu 10.04. It detects it as a CD Drive.
When I tried to 'Safely Remove Drive'
I got the following error:
Quote:
Unable to stop drive
Error detaching: helper exited with exit code 1: Detaching device /dev/sr1
USB device: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2)
SYNCHRONIZE CACHE: FAILED: No such file or directory
[Code]....
Ubuntu Networking :: Mobile Modem ACM-001 Cannot Detected By Karmic?
Oct 28, 2010At Saturday, 23rd October 2010 I bought a USB CDMA Modem named AX manufactured by Alltronix and has series
labeled ACM-001. The chipset is Qualcom. It didn't work on My Karmic Koala nor Lucid Lynx. I try to check some condition by writing some command in shell prompt like: tail -f /var/log/messages, lsusb, and modprobe. Here is the results.
result of tail -f /var/log/messages Oct 24 01:37:54 ubuntu kernel: [ 500.464348] usb 2-2: new full speed USB device using uhci_hcd and address 3 Oct 24 01:37:55 ubuntu kernel: [ 500.628220] usb 2-2: configuration #1 chosen from 1 choice Oct 24 01:37:55 ubuntu kernel: [ 500.636305] scsi5 : SCSI emulation for USB Mass Storage devices.
[Code]...
Ubuntu Networking :: Hp 210 Mini 3g Internal Modem Not Detected?
Apr 19, 2011I've just installed ubuntu on my father's netbook hp 210 mini 3g with internal 3g modem. At the beginning everything was fine - system automatically detected modem and asked for PIN code. I was very surprised but during download some updates connection broke.. and since then ubuntu doesn't detect modem. I have even reinstalled system
In the broadband connection wizard there is no device detected. I'm on ubuntu 11.04, but on the 10.10 was the same problem.
Ubuntu Networking :: Wireless USB Modem Not Detected Every Time?
Jul 13, 2011I am using Ubuntu 11.04 and a Huawei USB modem to connect to internet. Most of the time when I start computer it is not detected my system. Then I use to reboot and then it gets detected automatically. That means its drivers are now loaded. But I don't know why drivers are not loaded when I start first time.
View 1 Replies View RelatedFedora Networking :: Modem ZTE MF636 Not Longer Detected In F12 / Get It To Work?
Mar 25, 2010I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
Ubuntu Networking :: Hardware Not Detected - Solos Multiport PCI ADSL2+ Modem (4-port)?
Oct 22, 2010I've just installed Zentyal (formally eBox) which is a firewall built on Ubuntu server 10.04. Unfortunately my PCI modem is not automatically detected upon installation and the Zentyal community forum is not very active.Is it possible to get the 4-port Solos Multiport PCI ADSL2+ Modem card from Traverse Technologies working under Zentyal?Apparently the driver is included in kernel versions 2.6.29 and later so I was surprised that it was not automatically detected and working upon installation. It is also available from Zentyal was able to detect their single port card, the Vicking PCIADSL2+ttp://www.traverse.com.au/productvi...product_id=115). This card worked out-the-box - all I had to do was enter my static IP details! Is there any way to achieve the same functionality with the Solos 4 port?
View 1 Replies View RelatedUbuntu :: 10.04 Conexant D480 MDC Modem Is Not Being Detected?
Oct 7, 2010I have a conexant D480 MDC modem on my Dell Latitude | D800 but I am unable to Instll it,I have also tried using Gnome PPP,And it also says that no modems were detected on your system , Following are the error codes it generated Quote:
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
Ubuntu Installation :: 10.04 - USB Huawei 3 Modem Fails To Be Detected
May 1, 2010I've been trying out the netbook remix of 10.04 but I've been having some issues getting my Huawei modem to work. It detects the install cd and usb storage but it does not discover the modem.
This is the dmesg output after connecting the device:
Code:
> [10540.912126] usb 1-4: new high speed USB device using ehci_hcd and address 9
> [10541.055850] usb 1-4: configuration #1 chosen from 1 choice
> [10541.060834] scsi12 : SCSI emulation for USB Mass Storage devices
> [10541.061799] usb-storage: device found at 9
[Code]....
Fedora Hardware :: Modem Speed Is Bieng Detected Too LOW?
May 15, 2010I am new to linux.I installed fedora 12. i have setup wvdial to connect to the internet.but the problem is my usb modem's speed is being detected too low. It is zte cdma usb modem. In windows the baud rate was detected 230400. but wvdial detects the baud rate only 9600. the download speed is slower and web pages also load slowly.How can i correct this problem so that my modem works at full potential.
View 3 Replies View RelatedOpenSUSE Hardware :: Dialing USB Modem - Getting No Carrier Detected On Wvdial - Qinternet
Jul 17, 2011I have a usb modem(A phone): Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem It is recognized by Yast under modems.But I am getting No carrier detected on wvdial,qinternet and many I have tried with. Here is the output:
[Code]....
Ubuntu Networking :: Install Modem Driver For The Alcatel X200 USB Modem?
Mar 23, 2011find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
Ubuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?
Feb 8, 2010i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Ubuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network
Feb 14, 2010I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedUbuntu Networking :: Networking In 10.04 - In Network Manager There Is Not Way To Select My Modem In The First Step
May 3, 2010I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedUbuntu :: Installing Modem Huawei - Modem Can't Get Connected And Suddenly Remove From PC
Jun 10, 2010with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedUbuntu Networking :: Lan Pc Cannot Be Detected?
Dec 5, 2010i have a problem with detecting PC in LAN. I have installed ubuntu 1(lucid lynx)10.4 to four PCs in our school. I have connected it to router. All four PCs can connect and browse internet but cannot detect each one in the local network. I have edited already the network connections. Each one has unique IP address.However, after several trial of connecting to PC within the LAN, still i failed to detect local PC.
View 2 Replies View RelatedUbuntu Networking :: How To Use Nokia USB Modem
Jan 29, 2010I have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies View RelatedUbuntu Networking :: Can't Use USB Dial-up Modem?
Feb 19, 2010I'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
Ubuntu Networking :: Use 3G Smartphone As A Modem?
Feb 20, 2010I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk
Username: user
Password: pass
Ubuntu Networking :: Cannot Use Wifi Modem
Mar 21, 2010I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
Ubuntu Networking :: Huawei Modem In 9.10
Mar 22, 2010I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
Ubuntu Networking :: How To Use MMX 300G Usb Modem
Jul 2, 2010i m able to change mode to usb modem device 9603 Micromax 300 G USB modem.
but still got stuck with
bharat@ubuntu:~$ sudo modprobe usbserial vendor=0x1c9e product=09603
FATAL: Error inserting usbserial (/lib/modules/2.6.31-14-generic/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
Ubuntu Networking :: Run Telstra Next G Usb Modem In 10.4?
Oct 4, 2010how to run my telstra next g usb modem in ubuntu 10.4?
View 4 Replies View RelatedUbuntu Networking :: USB Modem Not Detecting
Jan 30, 2011I have a USB modem working in windows. But no luck to connect using Ubuntu 10.04.
I have setup usb-modeswitch and other stuff. The modem is attached to port ttyUSB0. But when i run "sudo wvdialconf" it displays message like this.
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
read the FAQ at [URL]
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
Ubuntu Servers :: Networking With Using 3G USB Modem?
Mar 12, 2011organize networking with usb 3g modem in my Ubuntu Server 10.04. Or give me any links how to do it.
View 1 Replies View RelatedUbuntu Networking :: Can't Get 3G Modem To Work
Jun 24, 2011I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
Ubuntu Networking :: Cannot Connect With The USB Modem?
Jul 29, 2011I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...