Debian Configuration :: Kannel Configuration For Huwei GSM Modem

Jan 24, 2011

To configure SMS gateway using Kannel configuration for Huwei GSM Modem

dmesg gives attached modem in my system:

View 2 Replies


ADVERTISEMENT

Debian Configuration :: Ethernet Card And DSL Modem - Internet Setup?

Feb 13, 2010

I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?

View 5 Replies View Related

Debian Configuration :: Network Manager Dooesnt Detect Modem?

Jul 5, 2011

Its my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro

View 2 Replies View Related

Debian Configuration :: ZTE MF112 Modem Setup - Light Stays Permanently Red

Oct 1, 2010

I recently got an upgrade from my mobile broadband provider (3 UK) that included a ZTE MF112 modem. I found that (unlike the Hauwei modem that preceeded it) this item did not work "out of the box". After a bit of googling around I decided that a good starting place would be to upgrade the OS on my laptop. I've been meaning to do this for a while anyway so have just installed Squeeze (the i386 version, on Thinkpad x61). I think it's now pretty close to working "out of the box" but annoyingly isn't quite there. I thought of getting a ZTE modem to work say that usb-modeswitch needs to be used to make it not load as a cdrom. However, it appears to load correctly without any alteration (in fact, adding the /etc/udev/rules.d/zte_eject.rules file I have found described appear to do the reverse and make it load as a storage device - at least an icon for it appears on screen).

lsusb correctly lists it as device 19d2:0031 and identifies the device as a ZTE MF636 (though it says MF112 on the package). Looking at the Network Connections tool there is an entry for 3 mobile that is, afaik, correctly configured. If I click on the network applet on the toolbar, there is a bit of contradiction: towards the top of the drop-down list it reports mobile broadband as not enabled, but further down under the "available" list is an entry for "3 internet". I haven't paid too much attention to the not enabled entry because it also reports the wired network as not managed, so maybe this is just a quirk of network manager. - I know you have to comment out eth0 entries in /etc/network/interfaces to have network manager deal with the interface in Squeeze. There are no entries for the mobile connection in the interfaces file.

If I click on the 3 internet entry the applet goes momentarily into trying to connect mode (the circling dot) but very quickly pops up a Disconnected box, and that's all that ever happens. I note that the light on the modem stays permanently red. On the old Huwei it started green but went blue, and I think I read something about it also changing colour on the ZTE. On the other hand, the Hauwei didn't show up on the network manager list until the light had turned blue, whereas this does seem to be there. It looks as if the problem is something fairly trivial since the device appears to be both recognised and (almost!) correctly configured. How to sort this.

View 3 Replies View Related

Debian Configuration :: Onda MT835UP USB Broadband Modem Doesn't Work With NetworkManager

Jan 20, 2011

I have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.

A few details:

- I'm using debian unstable,
- latest NetworkManager 0.8.2-3 from experimental
- latest modemmanager 0.4+git$foo from testing
- latest usb_modeswitch[_data] from experimental

[Code]....

View 1 Replies View Related

Debian Configuration :: Unable To Make Huawei E1750 Wireless Modem Work With Lenny

Oct 10, 2010

I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:

DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1

[code]....

View 3 Replies View Related

Debian Hardware :: Intel Soft Modem Configuration Error - Unable To Prepare Temporary Kernel Tree

Dec 4, 2010

I am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.

I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb

[code]....

in all these cases hsfconfig failed with the above error,

View 2 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Debian Configuration :: Multipath Configuration On 5.0 64 Bit - Doesn't Create The Relative Devices

Jul 20, 2011

i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard

Here is the multipath.conf

[Code]....

So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun

View 1 Replies View Related

Debian Configuration :: Reboot Both The Server And The Client Machines Every Time Change The SAMBA Configuration?

Apr 5, 2010

I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.

My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.

View 1 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail  or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Debian Configuration :: Fstab Configuration And Timeout - Automatically Continues Booting Even If The Hard Drives Are Not Attached?

Aug 3, 2011

I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)

View 5 Replies View Related

Debian Configuration :: Boot Via PXE, "no Default Or Ui Configuration Directive?

Mar 19, 2011

A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!

I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)

[Code]...

View 1 Replies View Related

Debian Configuration :: No Longer Allowed To Access The System Configuration

Jul 31, 2011

I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.

View 14 Replies View Related

Debian Configuration :: Coding The Apache2 Charset Configuration?

Mar 5, 2010

I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.

View 1 Replies View Related

Debian Configuration :: Exim4 Configuration For Local Addresses

Jun 17, 2010

I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):

[Code]....

The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.

View 1 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:

[Code]...

I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: Saving Configuration And Packagelist For Reuse?

Nov 14, 2010

I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?

View 4 Replies View Related

Debian Configuration :: Bind - Zone Configuration Error?

Apr 30, 2011

I have a problem with the configuration of the NS zone. Looked through the logs, and there:

Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner

[code]....

View 1 Replies View Related

Debian Configuration :: Xfinity WiFi Configuration

Feb 22, 2016

I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan

BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm

[code]...

View 0 Replies View Related

Debian Configuration :: Postfix - Dovecot Configuration

May 13, 2010

I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)

View 5 Replies View Related

Debian Configuration :: TightVNC Configuration On The Squeeze?

Feb 8, 2011

I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:

Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280

[code]...

After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?

View 1 Replies View Related

Networking :: Internet Configuration Through Dsl Modem

Sep 4, 2010

Recently i got bb internet connection, how to configure my linux pc to internet using DSL modem i.e in bridge mode.

View 4 Replies View Related

Ubuntu Networking :: Configuration Modem Zte Ac682 In 10.10?

Jul 14, 2011

i have problem with my modem zte ac682, i used ubuntu 10.10 and when i configuration my modem with wvdial my modem was not detected, this is my configuration

1. lsusb

2. sudo eject /dev/sr1

3. sudo modprobe usbserial vendor=0x19d2 product=0xffdd

4. sudo wvdialconf( in this step my modem was not detected)

View 1 Replies View Related

General :: Sendmail Configuration Over A Cable Modem

Feb 19, 2010

I have a CentOS system running. I want to get mail off it to my yahoo account.

I did a test mailx command and it goes out of the queue but never gets to my yahoo mail.

I am using a cable modem.
I can go out to the Internet so I know I have a valid connection.
I am guessing I need to set something up so the cable company will relay my mail for me.

I know i can pull pop mail down and sen it using my account.

Do I need to configure something in the sendmail.cf file to do this?

I just went into my email and say this ...patial msg included...

(reason: 553 5.7.1 [BL21] Connections will not be accepted from 98.249.136.1 9, because the ip is in Spamhaus's list; see [url])

View 9 Replies View Related

Networking :: Modem Router Configuration In Centos5

Jan 25, 2011

I m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. i want to ask how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not and if the answer is yes or no how comes !

View 1 Replies View Related

Debian Configuration :: How To Configuration Repository

Apr 11, 2010

How to change repository via terminal i install my debian trhough debian cd 1 so if i type apt-get upgrade the source is always fromd cd 1 and i want change ther source to the another repository(via internet not cd)

View 8 Replies View Related

Debian Configuration :: CUPS Configuration In Mac

Nov 3, 2010

I repair and network Canon copiers, and we have a couple of schools here in the US that have added some Mac computers (OS 10.6). The copiers they're running (Canon ImageRunner 5000) have stopped print driver support as of Mac OS 10.5, so I'm attempting to use CUPS as a workaround. Printing isn't an issue normally, but they're using the Canon "Job Accounting" feature to track usage, and that's where my problem lies. This is not a problem for any Windows OS machines, as drivers are available all the way through Windows 7.I have Linux Mint installed on my laptop, and am trying to configure one of the copiers here in the office with CUPS before I hit the field and do it for real, and had no problem installing the copier on my computer. Printing works great, however when I attempt to query printer for default options I get this error.

"Unsupported format 'application/vnd.cups-command'!" Does anyone have an idea of how to get past this point so I can save my company a lot of money by not having to replace machines? Please be aware I'm just a novice using Linux, so any steps to take will have to be spelled out. I can follow directions well, so feel free to post a walkthrough and I'll make the changes right away.

View 3 Replies View Related

Debian Configuration :: Wpa Configuration Using Wpasupplicant?

Jan 26, 2011

My univ network uses PEAP and MSCHAP for connecting. In my wpa_supplicant.conf there is no field fot certifcate location, but have userid and password field. Does this means that there is no client side certificate in use?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved